Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
(145 reviews)
Price: $270.79
In Stock
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
Item # HSAB
Our Price: $270.79
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (145)
- Q & A (0)
- Photos
- Used (4)
Brophy Camper Tie-Downs - HSAB
- Front and Rear Tie-Downs
- Brophy
- Bed-Mounted
- Powder Coated Steel
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.
Features:
- Creates attachment points for securing your camper to your truck bed
- Wide clamps provide superior holding strength
- Makes it easier to attach your turnbuckles (sold separately)
- Angled bracket provides more clearance between tie-downs and truck fenders than standard tie-downs
- Protects your truck's paint with neoprene pads attached to the brackets
- Resists corrosion and rust with black powder-coated steel
- Clamps securely onto your bed rails - no drilling required
- Includes 4 camper tie-downs with clamp plates, 12 neoprene pads, and installation hardware
- Made in the USA
Specs:
- Application: for exact fits, enter in your vehicle's year/make/model above
- Minimum 2" needed between sidewall and lip of bed rail
- Not compatible with drop-in bed liners, aftermarket bed rails, double-walled beds, or side-step beds
- Dimensions: see diagrams below
- 1-Year limited warranty
Angled Bracket Makes for Easy Hookup
These particular tie-downs are designed with an angled bracket that gives you more clearance between the tie-down anchor points and your truck's fenders. This extra space makes it much easier to attach and tighten your turnbuckles (sold separately) when you're securing your camper.
No-Drill Installation
These clamp-on tie-downs install quickly and easily, with no drilling or modification to your truck required. Because they're mounted in the bed instead of on the frame or body of your truck, you don't need any kind of fancy mechanical background to get this job done. You just need to slide the hold downs over the rails of your truck and clamp them down with T-bars and hex bolts.
The fact that they simply clamp on means that you can remove these tie-downs when you're not hauling your camper, leaving no trace. Use the provided neoprene pads on the T-bolts and tie-downs where they will make contact with your truck to make sure no scratches or dents will be left behind either.
It's important that the tie-downs on your truck line up with the anchors on your camper at the correct angle to ensure a secure hold. Ideally the tie-downs should be on the outside of your camper's anchor points, but they can be on the inside as well, just as long as they're not lined up with each other.
Securing your Camper
To secure your camper to your truck, you'll also need a tie-down hardware package consisting of turnbuckles, S-hooks, and chains (TDHP - sold separately). This hardware attaches the anchors on your camper to the tie-downs on your truck to keep your camper safely mounted. Once you tighten the turnbuckles to the correct level of tension (not too tight!), you'll be good to hit the road.
HSAB CR Brophy Heavy-Duty Tie Downs for Slide In Truck Camper - Black Powder Coated Steel - Camper Hold Down - Angled Design - 4 Pack
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4 - HSAB
Average Customer Rating: 4.4 out of 5 stars (145 Customer Reviews)
The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.by: Steve03/22/2024
Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch
by: Leo04/03/2024
The Brophy tie-downs work just as advertised. I am a recreational user of my camper - not full-time or long trips, and have had no issues with them. The only challenge is backing my truck under the camper with the brackets mounted - like threading a needle, because the leg stands barely clear the brackets. I have a 2-16 F-250 and a Northstar 650 and their is not enough clearance in the bed to add the brackets after the camper is in position. Again, this is not a problem with the brackets, its a camper leg/stand and bed width issue.
by: Mickey 05/10/2024
Kimberly was friendly, knowledgeable and really helped me pick out the right tie down. Would have no problem ordering from her agai.
by: Jeff R06/27/2014
I am so happy with your Angled Hold Downs. Especially how they clamp to the bed of my truck and I didn't have to drill any holes. They do a great job and I have no worries when the girls take it camping for the weekend... I do worry about the safety of my pickup though. hahaha
by: Teri04/04/2018
As always my order arrived early. The box was not in great shape but nothing was lost out the holes. Poor delivery guy could barely get it to the porch. I was surprised at how heavy they are. It took me about half an hour to get them installed. I have a 1995 Dodge Ram 2500. The shape of the inside of the truck was a pain to work around. I couldn't set the front tie downs as far forward as I would have liked, but it will work. Haven't got the camper yet but I'm sure they will be perfect. I have seen these on many pickups here in western Colorado. The installation video made my choice easy ...NO HOLES TO DRILL.
by: James07/09/2023
After installing the tie downs per the instructions I proceeded to connect a turnbuckle with chains and upon tightening it down the Brophy tie downs turned towards the camper connection point. In other words they would not tighten up.
Jenny N.
7/12/2023
I wanted to ask if you can send a picture of how the tie downs are installed. I want to help to make sure that you can use the tie downs.
by: Ty05/09/2024
Works great with the bike rack. Looks nice, easy installation. I'm glad I bought it. I would recommend.
by: Matthew06/20/2023
Items in the box were not secure and clearly banged around during shipping. Box was torn in a number of places and resulted losing the T-bolts. I discovered Friday evening, and called etrailer the next morning. Person indicated you don't ship on Saturday but would go out Monday morning and she'd mark it priority. She indicated I could expect delivery on Tuesday or Wednesday. I received notice of the delivery on Friday as I was on the way to Canada fishing for a week. Needless to say I got creative and used pieces of 2x2 instead to leverage brackets to truck bed side. When I got home I looked at the T-bolts and think I will stick with the wood. There is no coating on the T-bolts so would likely damage the bed lining.
by: Devin05/24/2023
1) Poor quality product: The nuts for the bed clamp can't even be tightened all the way due to poor design, friction with the body of the clamp.
2) The neoprene pads referenced in the instructions weren't included in my package.
3) Fast shipping time and good communication from eTrailer
Jenny N.
5/26/2023
I know that these tie downs are considered to be more universal. The external bed rail cannot be more than 5.5 inches wide and there needs to be at least 2 inches of space under the lips of the rail. Would you be able to send a picture of how yours is installed? Just be sure that you do not have a double- wall or step side bed. I will have Customer Service reach out to you about the missing neoprene pads. We will have them sent out.
by: Jeremy03/23/2023
The product itself will do the job, after I spend some precious time to clean it up. I was amazed that all the individual parts and hardware made it, since the box was totally destroyed. All of the powder coating of the plates are badly scratched, down to raw metal, just from banging and sliding against each other. A couple corners of the thinner metal flanges are bent, too.
This package looked like it was drop-kicked down a flight of cement stairs in a fit of rage.
Unfortunately, I need this to work ASAP, and will repair and modify to suit my needs. Never mind how I feel, or the principal of the matter, but I feel some refund or discount is in order.
I’m sure it left Brophy’s manufacturing facility looking shiny and straight.
I’m sure they could improve their packaging.
I’m certainly sure that etrailer could indentify this obvious issue and take some steps of their own to maintain a happy clientele, like simply throwing it into another heavy box.
Jenny N.
3/24/2023
It certainly sounds like the tie downs did have a rough ride in shipping. Customer Service will reach out to you.
by: Walt 07/26/2023
Your service was great. The products I ordered arrived ahead of schedule. Also the tie downs look to be of great quality--very heavy, I can't wait to try them this weekend. The shipping box took a real beating. The packaging tape worked well at holding the box together. The only suggestion I have is that you might consider using a stronger cardboard box or reinforcing it somehow to withstand the handling of your products while being shipped.
by: Loretta 08/02/2023
the clamp ons didn't allow for the plastic cover over the truck bed rails to remain in place on the 2022 Nissan Frontier KC with 6' 1" box.
by: Excellent 05/02/2019
These tie downs worked great for my Toyota Tundra. I was securing a light weight camper.
by: H edward05/15/2016
I have a Sunlight, 8 foot, slide-in truck camper that I now carry in a 2015 Dodge 1500 Quad Cab. I use the Brophy angled tie downs for the front of the camper and Happijac bumper tie down for the rear. It took some tweeking and the right combination of hardware to connect the Brophy tie down to the camper but in the end it all came together and I'm very happy with the results. They are relatively easy to install and make a solid, safe tie down system. I would recommend them to a friend.
by: Paul V.05/06/2020
Product was easy to install, worked great. It held on some pretty knarly roads.
etrailer is a great company to work with as well.
by: Bob T.08/30/2013
I installed the angled camper hold-downs today and it took me all of fifteen minutes. I was impressed at how heavy-duty they are. I am very pleased with the product.
Bob T.
8/30/2014
Well, its been a year since I installed the hold-downs on my truck and I am still very satisfied with them. They have been in use several times and in fact I am leaving next week on a two week hunting trip to Colorado.
by: Andrew 05/10/2023
The ease of installation and the robust product makes this a great go to for truck camping.
by: Gerry06/28/2020
Excellent product - super fast shipping - perfect fit for my 2019 Ram Turbo diesel 3/4 ton 4x4. Plenty of clearance.
by: Wade02/03/2018
Really impressed with the product and installation was really simple good quality product I would recommend it to anyone
by: Michael11/14/2023
The service was great and the staff was more than willing to help with any issues the only reason I gave it four stars was that the website was misleading
by: Gene03/17/2023
Good quality but to wide off bed doesn’t clear camper jacks
by: Erik 12/05/2023
Everything was correct to my order standard delivery was very fast
by: Les 11/17/2023
Awesome quick shipping. Thanks now I can pick up my camper this weekend
by: Sheila 01/24/2023
If only all companies were as service driven as Etrailer! We have always been pleasantly amazed at how courteous and efficient they are, from taking the initial order to delivery and follow up. Friendly, earnest and fast!
25
145
Show More Reviews
See what our Experts say about this Brophy Camper Tie-Downs
- Camper Tie Down Kit that Can Fit 2018 Ram 2500 with Rear Fold Down BumperI wish we had a rear Torklift tie down that fit your truck but none of them will fit with the rear bumper fold down step that you have. You'd have to go with a stake pockets tie downs like with the Brophy part number # HSAB. Then for a hardware kit to attach from the brackets to the camper you'd want the part # TDHP.
view full answer... - Fit of CR Brophy Truck Bed Camper Tie Downs # HSAB on 1998 Ford F150According to CR Brophy, the # HSAB truck bed camper tie-downs should fit your 1998 F150 just fine, as long as it has a standard (not step side) bed it doesn't have a drop-in bed liner, or plastic bed rails. I'd also recommend the tie down hardware, part # TDHP.
view full answer...
- Will the Brophy Camper Tie-Downs # HSAB Fit a 2010 Ford F-150 Short BedAs long as the bed of your 2010 Ford F-150 has access to the under side of the bed rails and a minimum of 2 inches between the lip of the bed rail and the side wall (see photo), the Brophy Camper Tie-Downs, # HSAB, should fit. These are a universal-fit item that was designed to fit as many truck beds as possible. We have not had the chance to test these tie-downs on a 2010 Ford F-150 short bed yet, but we have not had any complaints on that generation of the F-150. If the truck has a bed...
view full answer...
- Brophy Clamp On Camper Tie-Downs Compatibility With A 1973 Ford F-250 LongbedIf your 1973 Ford F-250 is not a dually and has bedrails that are not more than 5.5" wide and the space between the lip of the bedrail and the wall of the bedrail is at least 2" wide then the Brophy Clamp On Camper Tie-Downs # HSAB will work for your vehicle. These tie-downs will clamp onto the bedrails of your truck to provide you with attachment points for your truck bed camper. You'll also need some turnbuckles # TDHP to properly mount the camper to your tie-downs.
view full answer... - Installing Brophy Clamp On Camper Tie-Downs On A RAM 2500 The reason the manufacturers of the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSAB have the plastic bed rail exemption is because depending on the thickness of the plastic bed rail you might not have enough space to install the inner triangle shaped plate that secures the the tie-downs to the lip properly and the plastic bed rail could cause the tie-downs to slide side to side. If you do use these with the plastic bed rails still on you would...
view full answer... - Brophy Clamp On Camper Tie-Down Placement The Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSAB mount to the bed rail instead so you won't have any space issues with the running boards of your truck.
view full answer... - Will Brophy Clamp-On Tie-Downs Accommodate A 2,400lb Truck Bed Camper While there isn't a specific weight capacity for the Brophy Clamp On Camper Tie-Downs # HSAB there is a 3,000lb capacity for the turnbuckles # TDHP that go along with these tie-downs. To ensure fitment of these tie-downs your truck will need to meet the following criteria: External bed rail width cannot exceed 5-1/2" Requires at least 2" of space beneath lip of bed rail Not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds
view full answer... - Recommended Camper Tie-Downs For A 2016 GMC 2500HDFor your 2016 GMC Sierra 6-1/2 Foot Bed - Crew Cab - with board or step underneath truck bed and with a factory installed hitch the 2500 Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSAB with the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000lbs - Qty 4 Item # TDHP is your best option. It has a simple clamp on design that requires no drilling. There are some requirements with these tie-downs: external bed rail width cannot...
view full answer... - Rear Mounted Camper Tie Down For 2021 Toyota TundraWe do carry rear camper tie downs, however for your 2021 Toyota Tundra, we only have the TorkLift Custom Frame-Mounted Camper Tie Down # TLT2310. You could also use the Brophy Clamp On Camo Tie-Downs # HSAB with the turnbuckles # TDHP.
view full answer... - Will Brophy Camper Tie Downs HSAB Fit a 1995 Ford F-350The Brophy camper tie downs # HSAB do not have a specific truck fit list. But they do list some exclusions. Not for use with the following Some dually trucks and most mid-size or import pickup trucks Pickups with drop-in bed liners, plastic bed rails, side-step beds, and double-wall beds 2003 Dodge 3/4-ton and 1/2-ton 1500 extra cab 4-door 2WD short box 2002 Dodge 1500 4-door short box 2002 Dodge 1500 quad cab 2004-2008 Ford F-150 Your 1995 Ford F-350 does not seem to fit any of those...
view full answer... - What Brophy Camper Tie Downs Fit My 2017 Ford F-150? I have a definite way to determine what Brophy Camper Tie-Downs you need for your 2017 Ford F-150 short bed. I confirmed with Brophy that in order to know if you truck bed fits the tie-downs, your truck bed must have a minimum of 2 inches of space between the rail lip and the sidewall of the truck. In order to know if the Brophy tie downs work, I recommend measuring your truck. I went ahead and attached an image that shows how to conduct this measurement. Another factor to consider is...
view full answer...
- Recommended Camper Tie Down For North Star 600ss On 2017 Toyota TacomaI reached out to Torklift and they have never had a fit for a Toyota Tacoma because their hitches are for capacities greater than that size truck can handle. This means that the camper tie downs compatible with their hitch will not work for you due to the lack of a hitch compatible with your vehicle. For your 2017 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. These tie downs clamp into the bed rail of your truck...
view full answer...
- Turn Buckles to Use with Brophy Camper Tie Downs HSABSounds like you are asking about the turnbuckle kit to use with the Brophy Camper Tie Downs part # HSAB that you referenced. For that we have the Brophy Turnbuckles part # TDHP that was designed to be used with the HSAB and would work really great.
view full answer... - Could Brophy Camper Tie-Downs # HSAB Fit 2014 Chevy Silverado 1500As long as the bed of your 2014 Chevy Silverado has access to the under side of the bed rails and a minimum of 2 inches between the lip of the bed rail and the side wall (see photo), the Brophy Camper Tie-Downs, # HSAB, would fit. These are a universal-fit item that were designed to fit as many truck beds as possible. I looked up pictures of your bed rails and they appear to be perfectly compatible. In addition to the tie-downs, you may be interested in the tie-down hardware kit, # TDHP,...
view full answer...
- What Else Is Needed Besides Tie-Downs For Securing A Truck Bed Camper To A 2018 Ram 2500Before purchasing the Brophy Clamp On Camper Tie-Downs # HSAB you'll want to take a few measurements of your bedrails in order to determine if these would be a compatible fit. I've attached a diagram below going over the dimensions of the tie-downs. If it does fit then all you'll need is the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP to complete your setup. If the Brophy camper tie-downs are not going to be a fit I'll need to know the length of your Ram's bed, if...
view full answer...
- Will the Brophy Clamp On Camper Tie-Downs HSAB Fit a 2012 Ford F-250Yes, the Brophy Clamp On Camper Tie-Downs part # HSAB will fit a 2012 Ford F-250 so long as you have a SRW model. If you have a DRW model then you won't be able to use a set of bed mounted camper tie-down and will instead need to use frame mounted camper tie downs, the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2012 and part # TLF3006 (Short Bed + Factory Hitch). I have attached turn buckles for each of these options. Bed Mounted - Brophy Basic Turnbuckles part # TDHP Frame...
view full answer... - Could Brophy Camper Tie Downs be Used on 2016 Ram 3500The Brophy camper tie downs part # HSAB can be used on your 2016 Ram 1500 since they are a universal design. In general the frame mounted tie downs are a more solid choice over ones like these that attach just to the truck bed rails but the # HSAB would fit and work well. You'll also need hardware to secure the camper to the tie downs as well with the # TDHP.
view full answer... - Is Brophy Clamp On Camper Tie-Downs Item # HSAB Compatible With A Ford F-150 RaptorI contacted Brophy and determined that Item # HSAB is compatible with your 2012 Ford F-150 Raptor as long as the bed rail does not exceed a width of 5-1/2". I also recommend the Brophy Basic Turnbuckles Item # TDHP to go with the tie downs to secure the camper down. If your rails are wider than 5-1/2" you would have to go with a frame mounted tie down. I have included a link to the page of the 3 different options for the frame mounted tie downs. Make sure, if you must go this route, to...
view full answer... - Will Brophy Camper Tie-Downs Fit A 2014 Ram 3500 Dually Long BedThe Brophy Clamp On Camper Tie-Downs # HSAB typically are not a fit for dual rear wheels since they angle down closely to the body of the truck. With dual rear wheels your fenders stick out quite a bit eating into the space where the # HSAB would sit. I've attached a diagram below that you can use to measure the space you have and see if they will be a fit. If they are a fit then you'll also want to pick up the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP to complete...
view full answer...
- Will Brophy Camper Tie-Downs # HSAB Fit a 1995 Toyota T100Brophy camper tie-downs # HSAB are designed for full-size trucks but could fit your 1995 Toyota T100 if: External bed rail width does not exceed 5-1/2" There is at least 2" of space beneath lip of bed rail Truck does not have a drop-in bed liner, plastic bed rail, double-walled bed, or step-side bed With these I recommend using Brophy Basic Turnbuckles # TDHP.
view full answer... - How to Tell if Brophy Camper Tie-Downs Will Fit a 2001 Dodge Ram 3500 DuallyThe Brophy Slide In Camper Tie-Downs # HSAB are a universal application, and while I believe the rear part of your 2001 Dodge Ram 3500 dually will be too wide for them to fit, I'm attaching a photo of the dimensions so you can confirm this on your end. If these won't fit your truck then I recommend using the HappiJac Camper Tie-Downs # LC182910-182971 instead because they are still more on the cost-effective side of things when compared to the TorkLift alternatives.
view full answer...
- Brophy Camper Tie Down Recommendation for 2017 Ford F-350The Camper Tie Downs part # HSAB that you referenced are a universal install tie-down system that would work well on your 2017 Ford F-350. You should still check owners manual of your truck to see if there are any restrictions on using truck bed mounted camper tie downs. I checked with Brophy and they recommend using the # HSSF, which will work with your truck as long as there is two inches of clearance under the lip of the bedside, as shown in the provided diagram. For a hardware kit...
view full answer...
- Camper Tie Downs For 2021 Ram 3500 w/ Running Boards & Factory Towing PackageThis Clamp On Camper Tie Down # HSAB will work for your 2021 Ram 3500 with running boards and factory tow package. It will fit for both a 6-1/2 bed and 8 foot bed. Same with these TorkLift tie downs # TLD2140 and # TLD3112 I've included a video for you to learn more about them!
view full answer... - Installing a Truck Topper With Brophy Clamp On Camper Tie-Downs In PlaceThe Brophy Clamp On Camper Tie-Downs, # HSAB are 3/8" thick. So for a snug fit to your topper they will need to be removed or you will need to adjust for this dimension within the seal of where your topper comes into contact with the bed rails.
view full answer...
Do you have a question about this Camper Tie-Down?
Used Items Available
Condition: Installed
Notes: Item has been installed/test fit.
Condition: Surface Scratches
Notes: Parts are badly scratched throughout, strictly cosmetic.
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches and paint chips. Otherwise new and unused.
Condition: Installed
Notes: some light scratches and installation marks
Info for this part was:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Rachelle B
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Amanda M
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
April
7/11/2014
Haha