Videos
for Ford Edge Owners
Help Articles
for Ford Edge Owners
Expert Answers
for Ford Edge Owners
We offer 4 Class III hitches that are a confirmed fit for your 2015 Ford Edge Sport: • etrailer brand Class III hitch, part #e36RR • Curt Class III, part #C78KR • Curt Class III, part #C13234 • Draw-Tite Class III, part #75234 I'd eliminate the…
view full answer...Tekonsha does make a vehicle wiring harness confirmed to fit your 2020 Ford Edge SEL. You will need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118805. The Tekonsha #118669 you purchased is only confirmed to fit the 2015-2018…
view full answer...No, it does not. The Curt Hitch item #C78KR does not require you to remove your rear bumper cover when installing it on a 2023 Ford Edge. It bolts to the bottom of the frame and the crosstube is concealed behind the bumper cover. I have an alternate…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs #TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof…
view full answer...When the Curt hitch part #C13234 is installed on your 2015 Ford Edge Sport it will have a visible crosstube like in the picture I attached. If you wanted a hitch that doesn't have a visible crosstube you would instead want the part #75234 which…
view full answer...The Forest River R-Pod RP179 uses a 3,500 lb axle therefore the correct replacement braking assemblies for this trailer is the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-468-469. This kit will be a direct bolt-on replacement.
view full answer...It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…
view full answer...I checked with Curt to confirm the wiring harness specified for your 2012 Audi Q5 and it is indeed the Curt #C59236. I also spoke to my technical contact at Curt and he confirmed compatibility with your 2012 Q5. This harness provides isolation and…
view full answer...All 2017 F-Super Duty vehicles equipped with a factory trailer brake controller (TBC) utilize a trailer module (TRM) which initiates the trailer charging system. For trailer charging to operate, the TRM must detect a trailer is connected and a brake…
view full answer...I have a clevis hook that may work with your 5,000 lb trailer. Take a look at part #6495-401-04. This hook has a working load limit up to 5,400 lbs and the pin that connects through the chain is 7/16 of an inch in diameter. We have heavy-duty clevis…
view full answer...The Extension for Curt Roof Mounted Cargo Basket #C18117 is 37" wide and 4" deep measured from the inside of the bars. It's 39-1/4 inches wide on the outside of the bars. It lets you add on to your Curt Roof Mounted Cargo Basket #C18115…
view full answer...





























