My Vehicle:change vehicle

2014 Chevrolet Accessories:

change make

Select 2014 Chevrolet Model



Select Model for Your 2014 Chevrolet




What our customers are saying:

Best prices, best products, I'm more than pleased with the site and the whole transaction.

Kenneth

Akron, OH



Accessories



2014 Chevrolet Questions and Answers


  • Brake Controller Installation-2014 Chevy Silveardo
  • When used in conjunction with the # 3016 brake controller wiring adapter, the # 39523 brake controller would be plug and play. The controller wiring adapter would plug into the connector located in the convenience panel located behind the emergency brake pedal as shown in the provided photos. If your Silverado was not equipped with the factory 7-way, you can install the # HM40975 which would plug into the harness at the rear bumper. If you click the provided links, you can see some install...
    view full answer...

  • Best Fifth Wheel Pin Box Replacement Recommendation for a Lippert 1621 Pin Box
  • If you are looking for the best fifth wheel pin box to replace your Lippert 1621 that will provide the smoothest ride quality and won't break the bank I would recommend the new Trail Air Flex Air part # LC328492. This pin box works to fight and prevent vertical and horizontal chucking to provide you with a very smooth ride quality. I attached a demo video for more info. Since you have a short bed truck I believe the best option would be a Sidewinder Pin Box with a 5th Airborne Air Ride...
    view full answer...

  • What is the Towing Capacity of a 4 Cylinder 2014 Chevy Equinox
  • I found an online copy of the owners manual for the 2014 Chevy Equinox from Chevy and have the towing information for you. The models with the 2.4 liter motor have a gross trailer weight capacity of 1,000 pounds if the trailer does not have brakes or 1,500 pounds if the trailer does have brakes. The gross combined weight rating, which is the most the vehicle and trailer can weigh when loaded with cargo, fuel, passengers, and any accessories is 5,787 pounds for front wheel drive models...
    view full answer...

  • Bolt On Modifications for a 2014 Chevy Silverado 1500 5.3 liter to Maximize Horsepower
  • As far as products we carry the best option for maximizing the horsepower of your 2014 Chevy Silverado 1500 would be to go with a cat-back system, a cold-air intake, and a programmer. The most bang for your buck that you are going to get for exhaust would be the aFe Mach Force XP Cat-Back Exhaust System with Black Tip # AFE49-44038-B. For a cold air intake that would make the most economical sense and will provide you with just as much power as the other kits I would recommend the...
    view full answer...

  • Chevy Silverado Third Brake Light Wiring Source for Camper Shell
  • The main trailer wiring harness is located under the truck bed, usually above the spare tire. There is usually a socket for your trailer connector to plug into, but if you peel back the wire loom you will find a light blue wire further up in the wiring harness that is intended for use for a third brake lamp on a camper shell. I attached a couple pics to help you see where the wire is at.
    view full answer...

  • Best Cold Air Intake Recommendation for 2014 Silverado 5.3
  • It all comes down to personal preference in the end, but for the most part any cold air intake is going to give a vehicle just as much performance as the other. If you are looking for best bang-for-your-buck I would recommend the aFe Direct-Fit Cold Air Intake System with Pro Dry S Filter # AFE51-32332. This is an economically priced cold air intake designed to fit your 2014 Chevy Silverado that will give you the same performance gains as the more expensive kits and has a very easy to...
    view full answer...

  • Firestone Air Bag Suspension Enhancement for a 2014 Chevy Silverado LTZ Z71
  • The axle your version of the 2014 Chevy Silverado would be the Z71 rear axle and that should also be a 4 wheel drive model. The proper kit for a 1500 would be # F2430 that you have referenced. But if it happens to be a 2500 or 3500 then you would need to use # F2528. I have linked videos to the right showing typical installations for you. Also, if you do not want to manually fill the air bags every time you can install a Level Command II kit, # F2219, which will allow you to fill/remove...
    view full answer...

  • Will TracRac SR Sliding Truck Bed Ladder Rack Work With BAKFlip MX4 Hard Tonneau Cover
  • The installation of the TracRac SR Sliding Truck Bed Ladder Rack, part # TA21782-02 on your 2014 Silverado 1500 should not interfere at all with the BAKFlip Revolver Hard Tonneau Cover, part # BAK39120. The # TA21782-02 installs in the stake pockets with the included blocks and the rack sits on top of the bed rails. The # BAK39120 is installed on the inside of the bed rails and will work great with the ladder rack.
    view full answer...

  • Best Sliding Hitch Recommendation for a 2014 Chevy Silverado 1500
  • For a slider hitch for your 2014 Chevy Silverado 1500 6-1/2 foot bed I would recommend an auto slider like the Demco Hijacker part # DM8550034. Not only will this allow you to have tight turn clearance but since the hitch slides automatically you will never have to worry about getting out of the vehicle and manually sliding the hitch when in a parking lot. I attached a review video for you to check out as well. For the rail kit the best option is go with a custom install kit like the...
    view full answer...

  • What Size Toolbox Will Fit a 2014 Chevy Silverado Crew Cab with TracRac G2 Ladder Rack
  • The TracRac G2 ladder racks such as # TA21501-02-02 for your 2014 Chevy Silverado 1500 require rails that mount to the sides of the truck bed (this is the track that allows the ladder rack to slide). You will need to use the toolbox mounting kit, # TA25200, in order to mount a crossover toolbox. The mounting kit uses the inner most tracks on the side rails for the G2 ladder rack. The maximum width a toolbox can be is width from the top inside of one side of the truck bed to the opposite...
    view full answer...

  • Measuring Tailgate Clearance On 2014 Chevrolet Tahoe For Roof Mount Cargo Box
  • In order to be able to make sure your tailgate can open on your 2014 Chevrolet Tahoe with a roof box installed you will want to take a quick measurement. If your crossbars are adjustable you want to slide the front crossbar as far forward as possible. Then measure from the center of the front crossbar rearward to the seam that separates the roof and the tailgate. That is the minimum clearance measurement for a roof box you will want. As the attached chart shows, the Yakima SkyBox 16,...
    view full answer...

  • Modifications for a 2014 Chevy Silverado 1500 5.3 Liter to Maximize Horsepower
  • We do have the aFe Mach Force XP Cat-Back Exhaust System with dual pipes. You will want part # AFE49-42013-B. This system retains the black tips that you like. I have included a link to the installation details at right. The aFe Direct-Fit Cold Air Intake System with Pro Dry S Filter, part # AFE51-32332, provides a good balance of protection and performance and a slightly higher level of filtration than oiled filters. Horsepower and torque figures specific to your vehicle are not available....
    view full answer...

  • Horsepower Gains for 2014 Chevy Silverado 5.3L with Programmer, Cold Air Intake, and Exhaust Mods
  • To determine an exact amount of power gains for a 2014 Chevy Silverado 1500 with the 5.3 liter motor it would have to be placed on a Dyno to calculate its new output. When you add performance products to a vehicle, the gains do not necessarily stack. What I mean is if new exhaust adds 10 horsepower and a programmer adds 20 that doesn't mean that you added 30 horsepower; only that you increased it by up to 30 but its likely less. So we can provide a ball park figure but putting the vehicle...
    view full answer...

  • Battery Disconnect Switch Recommendation for a Travel Trailer Battery
  • I have a much easier solution for you. Check out the part # DW05312. This will attach to your ground lead and will provide an very easy way to disconnect the lead from the terminal. Check out the review video I attached for more info.
    view full answer...

  • Need to Locate Stoplight Switch Circ. on 2014 Chevrolet Express Van When Installing Brake Controller
  • I would recommend the CHMSL circuit for tapping into just the brake light signal of your 2014 Chevy Express Van to install a Prodigy P3 Brake Controller part # 90195 in your 2014 Chevy Express Van. This circuit will only see voltage when the brake are applied and should work very well as this is an often used circuit for brake controller installations. I also attached an FAQ on installing a brake controller from scratch for you to check out.
    view full answer...

  • Trailer Lights Do Not Work with 2014 Chevy Silverado But Do Work with 2008 Chevy Silverado
  • The trailer connector on the 2014 Chevy Silverado will be the same as previous generations because it is an industry standard. Factory integrated trailer brake controllers sometimes will not work with electric over hydraulic braking systems so if that is what is on the trailer then that could be the problem. The solution would be to install an aftermarket brake controller that is compatible with electric over hydraulic brakes like the P2, # 90885, using wiring harness # 3016. But since...
    view full answer...

  • Installing a Brake Controller on a 2014 Chevy Suburban
  • The 2014 Chevy Suburban does not have a place to plug in a brake controller but it does have a tow package wire bundle that you will use to wire up a brake controller. The wire bundle is located up under the dash to the left of the steering column. It should be held together with a white tag which also lists the wire functions. I have included a link to our help article that explains the installation. There may also be some connections that need to be made under the hood to make everything...
    view full answer...

  • Where are the Trailer Brake Controller Fuses Located on a 2014 Chevy Suburban
  • On the 2014 Chevy Suburban there are brake controller fuses in locations 6 and 63 under the hood. If the one at 63 is good then it must be the one at position 6 that is either missing or blown.
    view full answer...

  • No-Drill Truck Bed Ladder Rack Recommendation for a 2014 Chevy Silverado
  • For a similar ladder rack that has been confirmed to fit your 2014 Chevy Silverado that doesn't require drilling to install check out the # 59742. This rack uses clamps to attach the rack to your bed rails. I attached an install video plus installation instructions for you to check out as well.
    view full answer...

  • High Low Adapter Needed for RV to Raise Hitch Height When Flat Towing
  • We do offer extender/riser combinations, also know as high-low adapters, for situations like yours. I have included a link to all of our high-low adapters for you. It will take just a couple of steps to determine which adapter is right for you. First we will start determining the rise that is needed. Since you want the setup as level as possible, you will want to measure the height from the center of your hitch pin hole on the RV to the ground and then the distance from the center of...
    view full answer...

  • Parts Needed to Flat Tow a 2014 Chevy Spark 1LS with Manual Transmission
  • I spoke with my contact at Roadmaster and the base plates # 523174-1 will fit your 2014 Chevy Spark 1LS with manual transmission. For a compatible tow bar I recommend the Falcon 2, # RM-520. For safety cables use # RM-643. The coiled design keeps the cables off the ground. For lighting if you will not be towing very often I recommend a magnetic kit # C-ATL20A. With this kit you will not have to cut into the vehicle wiring for installation. If you plan on towing the Spark often then I...
    view full answer...

  • Helper Springs for a 2014 Chevy Silverado 1500 Z71 LT
  • For the type of loads that you are carrying in your 2014 Chevy Silverado 1500 Z71 I recommend Timbren helper springs # TGMRCK15S. There is no maintenance required with these springs and they will prevent that rear end sag you are experiencing. And they have a limited lifetime warranty. Several of the guys here use these springs and they love them because they are so easy to use. Just install them and you are done. No need to worry about adding or removing air or possible leaks in air...
    view full answer...

  • Kayak Carrier And Bike Rack Options For 2014 Chevrolet Spark With Naked Roof
  • I did some research on your 2014 Chevrolet Spark and per the owner's manual it states that no more than 110 lbs can be carried on the roof or the vehicle could suffer damage. Carrying 2 kayaks would not be an option because the weight on the roof with the kayaks, roof rack, and kayak carrier would exceed the roof weight limit. If carrying one kayak is an option for you I recommend the Rhino-Rack RS 2500 Roof Rack, part # RRRS284B. This roof rack has quiet aerodynamic black crossbars...
    view full answer...

  • Trailer Brake Controller Recommendation for a 2014 Chevy Silverado 1500
  • If you are concerned there is no where to mount a brake controller (something that comes up a lot since truck interiors are more and more car-like) then I have the perfect solution for you. You can use the Hopkins InSIGHT # HM47297. But you will also need wiring harness # 3016. You will need to cut off the end that plugs into the controller on the harness and the end of the plug on the controller box and splice the wire color for color. The other end of the harness will plug into the...
    view full answer...

  • Experiencing Bounce When Towing 24 FT Pull Behind Trailer w/ 2014 Chevrolet Silverado 1500
  • There are a couple things that come to mind that may help with the bounce that you are experiencing when towing the 24 ft pull behind trailer with your 2014 Chevrolet Silverado 1500. I would start by checking to make sure that your trailer isn't overloaded. Next, make sure that the tongue weight is between 10 and 15 percent of the overall trailer weight. Not enough weight in the tongue can cause bounce in the truck/trailer connection and too much weight could cause bounce at the back of...
    view full answer...

  • 5th Wheel Trailer Hitch Installation Kit for a 2014 Chevy Silverado 1500 Work Truck
  • For your Reese 5th wheel trailer hitch and 2014 Chevy Silverado 1500 you can use either universal installation kit # RP30035 or custom installation kit # RP50064-58. The benefit of the custom kit is that it requires less drilling and installs in less time compared to the universal kit. I have linked the installation instructions for the universal kit and a video for the custom kit. The hitch will fit the rails in either kit.
    view full answer...

  • Roof-Mounted Cargo Basket for 2014 Chevrolet Suburban with Factory Roof Rack Crossbars
  • Thank you for your kind remarks. If you're new to etrailer you're finding out that service and support are what etrailer is all about. I am lucky to have been trained by many great associates here and I am delighted to help out. Rooftop cargo solutions come in several categories, fabric bags, enclosed plastic cargo boxes and, of course, open metal baskets like the Yakima LoadWarrior # Y07070-74, Surco Safari # SPS5084-1101 and the Rola # 59504. I realize I don't know the exact weight...
    view full answer...

  • Recommended 14 Inch Radial Wheel/Tire Combo for Demco SS Tow Dolly
  • We have a few tire/wheel combos you can choose from. Depending on the load capacity you need, we have combos that have a load range C or load range D. I have attached a link to our product page for 14 inch wheel/tire combos we offer. I recommend the Karrier Radial Trailer Tire with 14" White Powder-Coated Wheel, part # AM32153. This wheel has a 5 on 4-1/2 bolt pattern and a 3.19 inch diameter pilot hole. The load capacity for this combo is 1,760 lbs at 50 psi. This tire has a 6...
    view full answer...

  • How to Install a Reese Brakeman Brake Controller in a 2014 Chevy Silverado 1500
  • The Reese Brakeman you have is the same thing as the Draw Tite Brake Controller part # 5504, and all that is required to install the # 5504 in your vehicle is the brake controller install harness part # 3016. Which I attached installation instructions and an install video for the harness in a link to the right for you to check out. This adapter plugs into the 4-pin connector in your vehicle's junction box. The box is located underneath the dash, to the left of the steering column, just...
    view full answer...

  • Adding a 7-Way Trailer Connector to a 2014 Chevy Traverse LT
  • Tow Ready wiring harness # 118271 is designed for 2014 Chevy Traverse models that came with a factory tow package. It is possible that your model does not have the factory tow package. But, it is also possible that the connector you need is tucked up where you can't easily see it or reach it. You would need to fish around for it up above that panel in the location where it is supposed to be. If you do not have the factory tow package (have the dealer run the VIN if you are not sure)...
    view full answer...




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.