Hello John, we have just the thing! Take a look at the Air Lift WirelessAIR Suspension System for Air Helper Springs Kit #AL27DQ. This comes with a wireless compressor and an auxiliary air tank. The air tank comes with a hose and inflator that can be…
Hi Casey; I'm sorry to say that the Air Lift WirelessONE Compressor #AL25980 is not a model that can support the addition of an air tank. The only option is to get a compressor system like the Air Lift WirelessONE #AL77DQ or WirelessAIR #AL27DQ…
Hey Dallas, the distance from the mounting bracket of the Dexter Jack #DX72CR out to the furthest point out opposite on the pump enclosure measures 10.4 inches. Please enjoy my crude dimensional drawing and let me know if you have any other…
As far as the mounting bracket, you can absolutely screw it directly to the hitch if you want. We do this frequently in our own installs and it will not compromise the strength of the hitch in any way. Now putting a few holes in the hitch does open…
In terms of air springs that are rated higher than #F2446, we do not carry a set rated higher for a 2008 Ford F-450. However, if you do not need to level the bed side to side often, which is one benefit of air springs, I would go with a Timbren…
The tank that comes with the Air Lift WirelessAIR Suspension System for Air Helper Springs #AL27DQ is a 2-Gallon tank. When it comes to the physical dimensions, the tank measures 17" Long x 8" Tall x 6" Wide (see attached).
Hi Cole, So the Air Lift WirelessAIR Suspension System for Air Helper Springs - Upgrade Kit #AL87DQ is meant just as an upgrade to an existing Air Lift WirelessAIR compressor like part #AL74000EZ. The Air Lift app won't be able to see the…
Hey Alan, the Westin HDX grille guard part #W95EC does not require drilling to install, will work with your Warn winch, comes with all mounting hardware needed, but will not work with your front end sensors and the tow hooks will need to be removed.…
You cannot use a weight distribution system with a pintle hitch. You would need to remove the pintle hitch you have now in order to use a weight distribution system. Once you do this, I recommend using the Equal-i-zer Weight Distribution System which…
Most pintle hooks use a standard bolt pattern which is 3-3/8" horizontally center to center and 1-3/4" vertically center to center (see photo). Therefore, the Pintle Hook part #C48231 would be a direct fit and work well for you. It also…
The Air Lift systems that fit your 2022 Ford F-350 are single rear and dual rear wheel specific so for your dually you need the following kit: - Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL86KV I also recommend checking out a…
I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…
