Videos
for Toyota Sequoia Owners
Help Articles
for Toyota Sequoia Owners
Expert Answers
for Toyota Sequoia Owners
I was not able to reference "633385" on our site. However, after further research it appears that this part number is in reference to a 7-way trailer connector. If this is the case, then the only way to install a 7-way trailer connector on…
view full answer...Yes and no, a leaf spring with a lower capacity will provide a better quality ride than a leaf spring with a higher capacity but you will not want to make that part the lowest rated suspension component. Typically, we recommend choosing a leaf spring…
view full answer...You can usually find the axle capacity on the tongue of the trailer where the VIN number is located. If that tag is missing, there is usually a tag on the axle that lists the capacity. If neither of these sources is available, there are guidelines…
view full answer...According to my research, the 2002 Toyota Sequoia has a 6500 lb towing capacity, but I recommend you confirm this for yourself by consulting your owner's manual or Toyota dealer. Air helper springs are designed to suspend cargo carried in the…
view full answer...Hi John; since you already have a 4-way on your vehicle the only thing you need is the Universal Installation Kit for Trailer Brake Controller #ETBC7. This kit comes with the adapter, wiring, breakers, and everything else required to upgrade your…
view full answer...The Dexter "8-256" is a hub assembly that uses an L68149 inner bearing and a L44649 outer bearing. This hub assembly was offered in a few different bolt patterns therefore you would need to confirm your bolt pattern using the attached help…
view full answer...None of the slipper springs we offer meet the dimensions you provided. You'll probably need to get a set of springs of the proper capacity and relocate the spring hanger and slipper. Given your axle diameter, you most likely have have a 2000 lb…
view full answer...We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…
view full answer...Attached are some photos of the typical wiring functions for truck and trailer 7-Way blade connectors, like parts #PK11893 and #PK12706. If you typical pull a trailer that has a 7-Way connector then you want to follow the pin out diagrams I…
view full answer...The most similar size to a 175/80-13 in a 14-inch diameter wheel size will be a 205/75-14 which will be right at 2 inches taller in diameter. For a wheel and tire in that size I would recommend the Provider part #TTWA14RWS. This has a white spoke…
view full answer...The reason there are trailer light kits listed for under 80 inches and over 80 inches is that there are different lighting regulations for vehicles that have widths that are larger than 80 inches in width than ones that are less than 80 inches wide.…
view full answer...I would be happy to help. The reason the LED Triple Trailer Tail Light - 4 Function - 36 Diodes - Black Base - Red, Amber, and Clear Lens #47-84-005 is due to the wiring on your vehicle thinking that the bulb is burnt out due to the lower power draw…
view full answer...



































