2003 Jeep Wrangler Jeep Seats

Hi Joseph, If your leveling system has a round tube design then you won't need the Replacement Swing Bolt #LC314596 and would instead need adapter lugs #LC314592 and shorter swing bolts #LC314595. The adapter lugs can be bolted…

I went out to the warehouse and measured seat #B3944137 which fits a CJ models from 1955 to 1995. These dimensions will be the same or nearly identical for all Jeep seat options. The seat portion of the seat is approximatel7 17 inches from the…

I went ahead and got those dimensions for you from our warehouse. The Bestop TrailMax II Fold & Tumble - Vinyl Rear Bench #B3944015 measures 33-1/4" wide x 19" deep x…

The Bestop TrailMax II Sport #B3943837 that you referenced measures 20-1/2" wide, 35" high, and 21" from front to back. It fits the following vehicles: 1976 - 1986 Jeep CJ-7 1997 - 2006…

Assuming you use appropriately sized grade 8 bolts for the Curt Channel Style Adjustable Ball Mount #C45900 there isn't a particular reason you couldn't them and some lock nuts in place of the included pins and clips.…

While I can't recommend trying to cook a burger on the Camco RV Portable Propane Campfire w/ Storage Bag, Regulator, and 8' Long Hose #CAM58041 it would be ideal for hot dogs and marshmallows for smores.

I went out in the warehouse and measured the etrailer Steel Trailer Fender, part #HP76VR. If you measured the width of the fender including the radius lip portion of the fender it is 10 inches wide everywhere. It is not narrower at the top. The…

We have Jeep style trailer fenders but only for up to 15 inch wheels. We don't have any fenders for 17 inch wheels unless you are referring to the overall diameter of the tire versus the wheel/rim. I haven't seen any…

The Single Axle Trailer Fender #HP76VR that you referenced would work well on your ATV trailer, but these do not have a weight rating so I would not recommend you drive your ATV over them. There should be a way to load your ATV's…

I went out into our warehouse and measured an etrailer Trailer Fender #HP76VR and found that from the ground straight up to the midpoint of the radius it measures 17-3/4 inches and measured from where the leg touches the ground to the midpoint of…

I spoke with my contact at Bestop who gave me the following dimensions for the Bestop TrailMax II Fold & Tumble #B3943915: Base: Length - 40-1/2" Depth - 20" Cushion Thickness -…

The back section of the Bestop TrailMax II High Back Seat you mentioned, part #B3943615 that you referenced measures 22-1/2 inches without the headrests. With the headrests all the way up the overall height is 31 inches, with them pushed down as…