Bestop TrailMax II Fold & Tumble Front Mounting Bracket Distance

Question

Question:

Hello, I’m planning on using this on some l-track in my ford transit, can you please tell me the front mounting bracket spacing, side to side?? Thank you

asked by: Nick

0

Expert Reply:

Hey Nick, thanks for reaching out!

The distance between the front mounting points of the Bestop TrailMax II Fold & Tumble # B3944109 is 23-1/2" according to my contact at Bestop.

expert reply by: Jon G

0

Answer 1

I reached out to my contact at Bestop to get the dimensions you asked for on the Bestop TrailMax II Fold & Tumble - Fabric Rear Bench - Charcoal #B3944109. It is 33-1/2 inches wide, 16-1/2 inches seating depth, 17 inches tall without headrests,…

view full answer...

Answer 2

The Bestop #B3944115 TrailMax II seat measures 40-1/2 inches wide by 20 inches. The seat back is 26 inches tall measured from the seat. I've shown these dimensions in the provided photo. I've also linked to a product description video that…

view full answer...

Answer 3

The passenger seat that is compatible with the Bestop TrailMax II Pro Driver Seat that you referenced is the Bestop TrailMax II Pro Passenger Seat, #B3946015. These seats are also available in a vinyl material as part #B3945015, for the passenger…

view full answer...

Answer 4

According to the manufacturer, the Bestop TrailMax II Fold & Tumble - Fabric Rear Bench - Black Denim #B3944115 measures 35" long, 24" wide, and 14" tall.

view full answer...

Answer 5

Yes, the Bestop TrailMax II Fold & Tumble #B3944001 will fit your 1995 Jeep Wrangler 4XE Unlimited.

view full answer...

Answer 6

Both the Bestop TrailMax Vinyl Rear Bench Seat #B3944001 and the black denim version #B3944115 use the same waterproof closed-cell high-density foam in their construction. The difference is that the black vinyl seat #B3944001 has a smoother surface…

view full answer...

Answer 7

According to my Bestop Representative, their TrailMax II fold and tumble rear bench seat measures 33 inches wide, exactly. The seat is a bolt-on fit for Jeep CJ and Wrangler models from 1955 through 1995.

view full answer...

Answer 8

The Bestop TrailMax II Fold & Tumble #B3944009 does include mounting hardware; if you take a look at the accompanying photo you can see what is included. You are going to need to use some of your 1987 Jeep YJ's original bolts to secure the…

view full answer...

Answer 9

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Bestop TrailMax II Fold & Tumble Front Mounting Bracket Distance

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching