2003 Jeep Wrangler Jeep Seats

Hi Joseph, If your leveling system has a round tube design then you won't need the Replacement Swing Bolt #LC314596 and would instead need adapter lugs #LC314592 and shorter swing bolts #LC314595. The adapter lugs can be bolted to the…

I went out to the warehouse and measured seat #B3944137 which fits a CJ models from 1955 to 1995. These dimensions will be the same or nearly identical for all Jeep seat options. The seat portion of the seat is approximatel7 17 inches from the…

The tonneau cover and rack system you are referring to from that answer - a Retrax XR cover and Yakima ladder rack - is absolutely compatible with a 2020 Toyota Tundra with a 5-1/2 foot bed, it will just require some different part numbers, and the…

The Bestop TrailMax II Sport #B3943837 that you referenced measures 20-1/2" wide, 35" high, and 21" from front to back. It fits the following vehicles: 1976 - 1986 Jeep CJ-7 1997 - 2006 Jeep TJ 1987 - 2003 Jeep Wrangler…

Since Valley went out of business there are no direct replacement parts that are available but a repair kit like the Curt #C25194 for 2" Curt Couplers may be compatible. What I recommend doing is replace your coupler completely as…

Assuming you use appropriately sized grade 8 bolts for the Curt Channel Style Adjustable Ball Mount #C45900 there isn't a particular reason you couldn't them and some lock nuts in place of the included pins and clips. Even though the…

I really like the Roadmaster Quiet Hitch which is part #RM-061 for a 2" shank or part #RM-062 for a 2-1/2" shank. This requires that your hitch receiver have a lip on it (most do) which it uses to put pressure on the shank of your…

While I can't recommend trying to cook a burger on the Camco RV Portable Propane Campfire w/ Storage Bag, Regulator, and 8' Long Hose #CAM58041 it would be ideal for hot dogs and marshmallows for smores.

I recommend using the Titan Chain Slip-On Shoe Chains for Snow and Ice. These are available in 2 sizes. The #TCSC-HX-S-M fits men's shoe sizes 4 to 8-1/2 and the #TCSC-HX-L-XL fits men's shoe sizes 9 to 13. These both have steel…

I went out in the warehouse and measured the etrailer Steel Trailer Fender, part #HP76VR. If you measured the width of the fender including the radius lip portion of the fender it is 10 inches wide everywhere. It is not narrower at the top. The 8-1/4…

We have Jeep style trailer fenders but only for up to 15 inch wheels. We don't have any fenders for 17 inch wheels unless you are referring to the overall diameter of the tire versus the wheel/rim. I haven't seen any tear campers with that…

The Single Axle Trailer Fender #HP76VR that you referenced would work well on your ATV trailer, but these do not have a weight rating so I would not recommend you drive your ATV over them. There should be a way to load your ATV's without…