The sleek, tough BrassKnuckles packs a punch, carrying 1 bicycle on your vehicle's roof in style - without making frame contact. Pivoting arm, ergonomic handle, and non-pinching trigger allow for easy operation. Fits most roof rack crossbars.Features: Wheel-mount carrier lets you transport 1 bike on your roof rack crossbars No contact with your bike frame and no wheel removal required Ratcheting, padded hook and metal wheel brace secure your bike by the front wheel Won't scratch or scuff your bike's frame Wheel brace folds down when not in use Pivoting arm folds down flush with tray when not in use Installs on either side of vehicle Ergonomic handle and non-pinching trigger make arm easy to operate 64" Long, tubular tray with endcap fits a wide range of tire sizes Works with skinny road tires or up to 2.7" wide mountain bike tires Fits bikes with 20" - 29" wheels Fat bike kit (RKY1240 - sold separately) lets you adapt rack to carry 1 bike with fat tires Sliding, ratcheting plastic straps secure front and rear wheels to tray Adjusts to fit different bike wheelbases Streamlined, low-profile design minimizes wind noise 2 Lock cores (RKY0332 - sold separately) secure bike to carrier and carrier to roof rack Lightweight, corrosion-resistant aluminum wheel tray with black powder coat finish Universal mounting hardware allows for flush fit on most roof-rack crossbars Rubber-coated stainless steel straps on front of rack tighten around crossbar Bracket on rear of rack clamps around crossbar Black color Specs: Carrying capacity: 1 bicycle Application: round, square, aero/elliptical, and most factory crossbars Minimum crossbar spread: 24" Maximum crossbar spread: 43" Weight capacity: 45 lbs Dimensions: 64" long x 12" wide x 2" tall Weight: 18 lbs Limited lifetime warranty
2-Bike rack swings away from the rear of your vehicle with bikes loaded for complete cargo area access. It's perfect for carrying e-bikes, fat bikes, or bikes with a carbon frame or custom paint job.Pivoting Rear Wheel Cradles with Ratcheting Wheel Straps The rear wheel cradles accommodate a wide variety of bike wheelbases. They pivot front to back, adjusting automatically to each bike's wheelbase - no need for sliding and tightening.
Perfect for e-bikes or regular bikes with fenders, this 1-bike rack uses a pivoting hook with straps to secure your bike's front wheel. The front-mounted handle lets you tilt the rack to access your cargo area without removing your bike.It pivots front to back, adjusting automatically to your bike's wheelbase so there's no need for sliding and tightening. Secure the wheel in place with the built-in ratcheting strap. The strap also includes an extender for use with a fat bike. Front-Mounted Handle for Easy Tilting and Folding The rack tilts down with your bike loaded.
This lightweight, 3-bike rack is perfect for carrying e-bikes, fat bikes, or bikes with a carbon frame or custom paint job. Front bike position can be easily removed if you only need to carry 2 bikes.Pivoting Rear Wheel Cradles with Ratcheting Wheel Straps The rear wheel cradles accommodate a wide variety of bike wheelbases. They pivot front to back, adjusting automatically to each bike's wheelbase - no need for sliding and tightening.
Perfect for e-bikes or regular bikes with fenders, this 2-bike rack uses pivoting hooks with straps to secure your bike's front wheels. The front-mounted handle lets you tilt the rack to access your cargo area without removing your bikes.The front wheel cradles also have stabilizer straps to further secure your bikes to the rack. Pivoting Rear Wheel Cradles The rear wheel cradles accommodate a wide variety of bike wheelbases.
This low-profile bike rack lets you carry 1 fat bike on your vehicle's roof without making frame contact. Includes 2 fat bike wheel straps for tires up to 5" wide. Clamp on brackets install on most roof rack crossbars.Features: Wheel-mount carrier lets you transport 1 fat bike on your roof rack crossbars No contact with your bike frame and no wheel removal required Ratcheting, padded hook and extra wide metal wheel brace secure your bike by the front wheel Won't scratch or scuff your bike's frame Wheel brace folds down when not in use Pivoting arm folds down flush with tray when not in use Installs on either side of vehicle Ergonomic handle and non-pinching trigger make arm easy to operate 59-1/2" Long, tubular tray with endcap fits a wide range of tire sizes Includes 2 fat bike wheel strap extensions to accommodate tires up to 5" wide Fits bikes with 20" - 29" wheels Sliding, ratcheting plastic straps secure front and rear wheels to tray Adjusts to fit different bike wheelbases Streamlined, low-profile design minimizes wind noise 2 Lock cores (RKY0332 - sold separately) secure bike to carrier and carrier to roof rack Lightweight, corrosion-resistant aluminum wheel tray with black powder coat finish Universal mounting hardware allows for flush fit on most roof rack crossbars Brackets on front and rear of rack clamp around crossbars Specs: Carrying capacity: 1 bicycle Application: round, square, aero, elliptical, and most factory crossbars Weight capacity: On aftermarket crossbars: 45 lbs On factory crossbars: 35 lbs Dimensions: 59-1/2" long x 12" wide x 3" tall Limited lifetime warranty
This lightweight, 2-bike rack is perfect for carrying e-bikes, fat bikes, or bikes with a carbon frame or custom paint job. Front-mounted lever lets you easily tilt the rack for cargo access and fold for storage.Pivoting Rear Wheel Cradles with Ratcheting Wheel Straps The rear wheel cradles accommodate a wide variety of bike wheelbases. They pivot front to back, adjusting automatically to each bike's wheelbase - no need for sliding and tightening.
This lightweight, 1-bike rack is perfect for carrying an e-bike, a fat bike, or a bike with a carbon frame or custom paint job. An available 1-bike add-on allows you to travel with a riding partner.Secure the wheel in place with the built-in ratcheting strap. The strap also includes an extender for use with a fat bike. Front-Mounted Release Lever for Easy Tilting When the rack is unloaded you can pull the lever to fold it up for storage.
This heavy-duty 2-bike rack is perfect for carrying electric bikes and bikes with fenders or carbon frames. Generous spacing between trays prevents bike-to-bike contact. Included ramp lets you roll your bikes onto the rack. Tilts with bikes loaded.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Ratcheting hooks on pivoting upright arms hold your bikes securely by the front wheels Trays with sliding rear wheel straps let you carry bikes with different wheelbases Generous spacing between trays helps prevent bike-to-bike contact Front-mounted hand lever lets you tilt and fold the rack with ease Tilts with bikes loaded to access cargo area Included ramp lets you roll heavy bikes onto the rack Anti-rattle hitch pin reduces movement of rack in hitch receiver Keyed-alike locks deter theft of your bikes and the rack Durable aluminum with black powder coat finish is corrosion resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 2 bicycles Weight capacity: 80 lbs per bike Maximum tire width: 4.5" Maximum bike wheelbase: 55" Wheel diameter: 20" - 29" Distance between bicycles: 15" Weight: 52 lbs Ramp length: 48" Limited lifetime warranty
Roof-mounted bike carrier holds almost any size bike and attaches to aero, round, square or factory crossbars - no adapter needed. Wheel-mount design ensures that your bikes are easy to load, and the bike rack is lockable with Same Key System cores.You can mount your bike on FrontLoader without removing the front wheel, cutting the loading time drastically compared with fork-mounted designs.
This 3-bike rack is perfect for carrying electric bikes and bikes with a carbon frame or custom paint job. Tiered trays prevent bike-to-bike contact and add ground clearance for backing down steep driveways. Tilts with bikes loaded.Each arm has 4 slots to accommodate 20" - 24", 24" - 26", 26" - 27.5", and 27.5" - 29" bike tire sizes. To adjust each arm to fit your wheel size, remove the blue bolt, slide the bridge to the desired tire size, and re-insert the bolt. Grooved Wheel Trays The GuideRail doesn't have wheel cradles like many platform bike racks.
Perfect for e-bikes or regular bikes with fenders, this 3-bike rack uses pivoting hooks with straps to secure your bike's front wheels. The front-mounted handle lets you tilt the rack to access your cargo area without removing your bikes.The front wheel cradles also have stabilizer straps to further secure your bikes to the rack. Pivoting Rear Wheel Cradles with Ratcheting Wheel Straps The rear wheel cradles accommodate a wide variety of bike wheelbases.
Heading to the lake at first light, you want your trailer ready to roll. This side-mount carrier gives your spare a secure spot on the tongue, out of the way but right where you need it if a flat happens.Highlights Side Mount Design: Secures your spare on the trailer tongue, out of the way but easy to grab when you have a flat. Works with Common Wheels: Plate has pre-drilled bolt holes that match up with 4- and 5-lug wheels.
Flats happen fast. This side mount carrier keeps your spare on the tongue where you can grab it quickly. The hot-dip galvanized finish keeps the hardware from seizing up so the swap is quick and you're back on the road.Highlights Quick Access When You Need It: Side-mounted design keeps your spare close at hand so you can swap it out fast in an emergency. Adjustable Fit: Works with both 4-lug and 5-lug wheels for added versatility.
This lightweight, 2-bike rack is perfect for carrying e-bikes, fat bikes, or bikes with a carbon frame or custom paint job. Front bike position can be easily removed if you only need to carry 1 bike.Pivoting Rear Wheel Cradles The rear wheel cradles accommodate a wide variety of bike wheelbases. They pivot front to back, adjusting automatically to each bike's wheelbase - no need for sliding and tightening.
... It's safe for carbon frames and you don't have to remove your bike's front wheel for setup. Easy, clamp-on installation on most crossbars.Features: Wheel-mount carrier lets you carry 1 bike on your roof rack crossbars Let's you mount bike without having to remove the front wheel Ratcheting hook holds your bike securely by the front wheel - no frame contact Keyed lock deters theft of your bike Rear-wheel cradle with rubber strap slides to accommodate different wheelbases Easy, clamp-on installation on most crossbars - no tools required Durable aluminum and steel construction are rust resistant Specs: Application: round, square, aero, elliptical crossbars, and most factory crossbars Crossbar spread: 18" - 33" Maximum load bar dimensions: 3-1/2" wide x 2" tall Carrying capacity: 1 bike Weight capacity: 33 lbs per bike Maximum tire width: 4-1/2" Wheel diameter: 20" - 29" Dimensions: 51" long x 6" wide x 12" tall Carrier weight: 10 lbs Limited lifetime warranty
This wheel-mount carrier lets you transport 1 bike on your roof rack crossbars. Pivoting wheel hoops hold bike by the front wheel, and TorqueRight knob prevents over-tightening. ... Features: Wheel-mount carrier lets you transport 1 bike on your roof rack crossbars No frame contact and no wheel removal required Pivoting wheel hoops hold your bike by the front tire Hoops fold down flat when not in use Integrated TorqueRight knob prevents the wheel hoop from being over- or under-tightened Sliding wheel holder with ratcheting strap secures the rear wheel to tray Holder slides along tray to fit different wheelbases Easy installation on most crossbars with rubber-coated stainless steel straps Included SmarT-slot kit lets you install the rack in your crossbars' top channels Same Key System lock cores (Y07202 - sold separately) secure bike and rack Integrated TailWhip cable lock accepts a core to secure your bike to the rack Rear mounting clamp accepts a core to secure the rack to your vehicle Built-in anchor point in wheel hoop accepts a U-lock (sold separately) up to 1" in diameter Attach lock to bike frame and rack for added security Streamlined, low-profile design minimizes wind noise Sturdy steel construction with chip-resistant powder coat finish Specs: Application: round, square, aero, elliptical, and most factory crossbars Carrying capacity: 1 bicycle Weight capacity: 45 lbs Maximum tire width: 4" Wheel diameter: 26" - 29" Maximum wheelbase: 52" Crossbar spread: 18" - 36" Overall dimensions: 56" long x 9-1/2" wide x 4-1/2" tall Carrier weight: 18 lbs Limited lifetime warranty
This 2-bike rack is perfect for carrying electric bikes and bikes with a carbon frame or custom paint job. Tiered trays prevent bike-to-bike contact and add ground clearance for backing down steep driveways. Tilts with bikes loaded.Each arm has 4 slots to accommodate 20" - 24", 24" - 26", 26" - 27.5", and 27.5" - 29" bike tire sizes. To adjust each arm to fit your wheel size, remove the blue bolt, slide the bridge to the desired tire size, and re-insert the bolt. Grooved Wheel Trays The GuideRail doesn't have wheel cradles like many platform bike racks.
This carrier lets you transport 1 bike by the wheels on your vehicle's roof. Pivoting upright arms hold your bike firmly by the wheels. Full-length tray accommodates most wheelbases. ... Features: Wheel-mount carrier lets you transport 1 bike on your roof rack crossbars Pivoting upright arms hold your bikes by the wheels Pre-marked bridges adjust for various bike tire sizes to ensure perfect fit Sliding, locking lever in wheel tray secures upright arms over your bike wheels Included chain lock deters theft of your bike Simple, clamp-on installation on most crossbars Black powder coated aluminum is durable and corrosion resistant Specs: Application: Thule, Yakima, Rhino Rack, Inno, and most factory crossbars Carrying capacity: 1 bike Weight capacity: 45 lbs Maximum tire width: 3" Maximum wheelbase: 55" Wheel diameter: 20" - 29" Dimensions: 59-1/2" long x 6-1/8" wide x 3-1/2" tall Carrier weight: 20 lbs Limited lifetime warranty
Perfect for e-bikes or regular bikes with fenders, this 2-bike rack uses a pivoting hook with straps to secure your bike's front wheel. The front-mounted handle lets you tilt the rack to access your cargo area without removing your bike.It also has lower straps that secures the wheels to the cradles. Pivoting Rear Wheel Cradles with Ratcheting Wheel Straps The rear wheel cradles accommodate a wide variety of bike wheelbases.
This lightweight, easy-to-load rack lets you carry 1 fat bike of almost any size or frame style on your crossbars. A hook with presets for common wheel sizes and a ratcheting wheel cage hold your bike securely by the front wheel - no frame contact.Features: Wheel-mount carrier lets you transport 1 fat bike on your roof rack crossbars Great for bikes with non-traditional frames, rear suspensions, and bottle cages Ratcheting wheel cage and telescoping hook allow for easy bike loading Wheel-mount design eliminates frame contact - perfect for carbon frames Hook presets for common wheel sizes help speed loading process Versatile loading options - hook can be positioned on passenger's or driver's side of rack Cage and hook fold down so you can leave rack on car when not in use Sliding cradle with quick-release ratchet strap secures rear wheel to tray Diagonal strap creates maximum surface contact with tire rim for improved stability Replace long straps with included short straps to carry standard size bike One-Key System lock cylinders (sold separately) let you secure rack to vehicle and bike to rack Integrated cable lock secures your bike to rack Rear mounting clamp secures rack to your vehicle Lock cylinders can be swapped out to make all your Thule accessories keyed alike Quick and easy installation on most crossbars - no tools required Cam-action levers let you clamp rack to crossbars T-track hardware installs directly into the top channels of your crossbars Anodized aluminum wheel tray is lightweight and corrosion resistant Black and silver color Specs: Application: most round, square, aero, elliptical, or factory crossbars Crossbar spread: 24" - 43" Maximum top channel dimensions: 20 mm x 20 mm Carrying capacity: 1 bicycle Weight capacity: 44 lbs Maximum tire width: 5.0" Maximum wheelbase: 48" Wheel diameter: 20" - 29" Dimensions: (open): 64" long x 13" wide x 24" tall Dimensions (folded): 64" long x 13" wide x 4-3/8" tall Weight: 17 lbs Limited lifetime warranty The UpRide wheel-mount bike rack lets you transport 1 fat bike of nearly any size or frame style on your roof rack crossbars.
Flats happen fast. This side mount carrier keeps your spare on the tongue where you can grab it quick. Heavy steel with a zinc finish holds it tight, even around saltwater, so your spare is ready when you need it most.Highlights Quick Access When You Need It: Side-mounted design keeps your spare close at hand so you can swap it out fast in an emergency. Adjustable Fit: Works with both 4-lug and 5-lug wheels for added versatility.
Flats happen fast. This high-mount carrier keeps your spare up out of road grime, and ready to grab when you need it. The hot-dip galvanized finish keeps the hardware from seizing up so the swap is quick and you're back on the road.Highlights High Mount Design: Keeps your spare up and out of the way, ready when you need it. Fits Common Wheels: Works with 4-, 5-, and 6-lug wheels found on most trailers.
This lightweight, 2-bike rack is perfect for carrying e-bikes, fat bikes, or bikes with a carbon frame or custom paint job. There is also a 1-bike add-on available if you want to take an additional riding partner to the trailhead.Pivoting Rear Wheel Cradles The rear wheel cradles accommodate a wide variety of bike wheelbases. They pivot front to back, adjusting automatically to each bike's wheelbase - no need for sliding and tightening.
Filters
