Replaces the control touchpad for your Power Gear RV auto-leveling system. Includes the control panel and the wiring harness.Features: Replaces the control touchpad for your Power Gear RV auto-leveling system Includes the control panel and the wiring harness Specs: Overall dimensions: 5-1/8" wide x 3-5/8" tall x 3/4" thick Mounting holes center-to-center: 4-5/8" wide x 3-1/8" tall Fits: PowerGear RV auto-leveling systems
Replaces the auto leveling control touchpad for your Lippert Level-Up hydraulic RV leveling system (241132).Features: Replaces the Quick Level auto-leveling control pad for your Lippert Components Level-Up RV leveling systems (241132) Fits: Lippert Level-Up hydraulic RV leveling system: 241132
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking. Corrosion-Resistant Finish: E-coat and matte black powder coat help prevent rust and corrosion.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking. Corrosion-Resistant Finish: E-coat and matte black powder coat help prevent rust and corrosion.
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 4 pads 2-Year warranty
Base pad replaces the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pad works as a jack stand to support your trailer's tongue or stabilizer jack.Features: Base pad works as a jack stand to provide a platform that supports the weight of your tongue or stabilizer jack Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pad easy to carry and retrieve from under your RV Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 1 pad Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when 2 are stacked: 14" 2-Year limited warranty
Replace the bricks and blocks normally needed when positioning your trailer jack with this base pad. 7" Tall pad works as a jack stand to support your trailer tongue's weight during storage.Features: Base pad works as a jack stand to provide a platform that supports the weight of your trailer tongue Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs Dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Quantity: 1 pad 2-Year warranty
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. Includes SnapJack feet for improved stability and grip on uneven terrain.
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 6 pads 2-Year warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack the pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when stacked: 12-3/8" Quantity: 2 pads 2-Year warranty
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 5 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb A-frame jack uses a drill adapter so the lift happens without the handle. The coupler lines up faster, and the SnapPad stays planted on soft ground.The jack uses a round removable foot plate for base support, and the Replacement Pad for SnapPad Jack Stand Pad System - 6" Round Jack Foot locks onto that foot to increase the contact area at the ground. With that added footprint in place, the jack stays planted on gravel, grass, or sand while the trailer remains supported during loading and while it sits unhitched.
Your arm stalls mid-crank trying to lift a loaded trailer tongue to meet the hitch. This 2,000 lb swivel jack uses a drill adapter so the lift happens without the handle. It pivots up for clearance, and the SnapPad stays planted on soft ground.Specs Capacity and Lift: Maximum capacity: 2,000 lbs Maximum travel: 14" Tube Diameters: Outer tube: 2-1/4" outer diameter Inner tube: 2" outer diameter Mount Type: Swivel bolt-on Operation: Handle: sidewind, fold-down for power drill access Drill adapter: 3/4" integrated nut and 3/4" socket included Construction: Outer tube: steel with e-coat and glossy black powder coat Inner tube: steel with white zinc plating Foot plate: round, removable Included Accessories: Mounting hardware: (3) 3/8"-16 x 1" grade 5 hex bolts, (3) 3/8" flat washers, (3) 3/8"-16 grade 5 nylon lock nuts 3/4" socket for drill operation Warranty: Limited lifetime SnapPad Jack Stand Pad: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs Warranty: 2-Year Included Components: etrailer Manual Sidewind Trailer Jack w/ Drill Adapter - A-Frame - 14" Lift - 2K Replacement Pad for SnapPad Jack Stand Pad System - 6 Round Jack Foot
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 4 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 2 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. ... Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 9" round jack foot Diameter: 11" Weight: 5 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. ... Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 11-1/2" or 12" round jack foot Diameter: 13-3/4" Weight: 8.4 lbs 2-Year limited warranty
Replaces 4 pads for your SnapPad jack stand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. ... Features: Replaces 4 pads for your SnapPad jack stand pad system Pads increase the surface area of the jack feet to help prevent sinking and provide added stability Made in the USA Specs: Quantity: 4 pads Application: 9" round jack feet Diameter: 11" Weight per pad: 5 lbs 2-Year limited warranty
Replaces 6 pads for your SnapPad jack stand pad system. Pads increase the surface area of the jack feet to help prevent sinking and provide added stability. 4 Pads fit 9" round jack feet. 2 Pads fit 11-1/2" or 12" round jack feet.Features: Replaces 6 pads for your SnapPad jack stand pad system Pads increase the surface area of the jack feet to help prevent sinking and provide added stability Made in the USA Specs: Total quantity: 6 pads 4 pads Application: 9" round jack feet Diameter: 11" Weight per pad: 5 lbs 2 Pads Application: 11-1/2" or 12" round jack feet Diameter: 13-3/4" Weight per pad: 8.4 lbs 2-Year limited warranty
Increase the surface area of your camper's leveling jack foot to help prevent sinking and to get added stability. Durable rubber pad easily and permanently snaps into place.Features: Heavy-duty rubber pad snaps onto the foot of your camper jack for extra stability Prevents sinking into soft ground Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal foot from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Helps dampen vibration from inside camper that could cause shifting Built-in drains release moisture to prevent jack foot from corroding Simple, one-time installation Line up the pad beneath your jack's foot and lower the foot until the lip on the pad fully engages and locks in place Made in the USA Specs: Application: 6" round jack foot Diameter: 7-3/4" Overall height: 1-3/4" Height from top of foot platform to lip of pad: 3/4" Weight: 2.4 lbs 2-Year limited warranty
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. ... Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 10" octagonal or round concave jack foot Diameter: 13-1/4" Weight: 8.9 lbs 2-Year limited warranty
Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. ... Features: Replaces 1 pad for your SnapPad jack stand pad system Pad increases the surface area of the jack foot to help prevent sinking and provides added stability Made in the USA Specs: Application: 8" round jack foot Diameter: 10" Weight: 3.8 lbs 2-Year limited warranty
Filters
