Bolt this anchor on your ladder rack for an extra tie-down point or use it as a lashing ring on your horse trailer. 1/2" Thick, cast aluminum cleat has a working load limit of 800 lbs. ... Features: Chain loop creates a reliable tie-down point on your trailer, truck, or work vehicle Works great as a lashing ring on horse trailers or as an extra anchor on your ladder rack Durable cast aluminum construction is corrosion resistant Pre-drilled for easy bolt-on installation Mounting hardware not included Specs: Working load limit: 800 lbs Overall dimensions: 5" long x 2-1/4" wide Useable interior space: 2-1/8" long x 1-3/4" wide Distance between mounting holes (center-to-center): 4" Mounting hole diameter: 1/2" Material thickness: 1/2" 1-Year warranty Note: This tie-down anchor is not approved for lifting applications.
Designed to work with your Tow-Rax floor track, this tie-down anchor provides an easy-to-use loop for securing your cargo. Break strength is 5,000 lbs.Features: Stud tie-down anchor attaches to Tow-Rax low-profile floor track (sold separately) to create a convenient tie-down point Slips into anchor slots on track Can be easily adjusted along length of track Integrated loop lets you quickly attach straps and other tie-downs to secure cargo Specs: Quantity: 1 tie-down anchor Maximum load (break strength): 5,000 lbs Safe working load limit (WLL): 1,666 lbs Safe load rating can vary based on angle of pull Inner diameter of ring: 2-1/4"
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a direct place to connect, so you spend less time re-hooking and repositioning tie-downs.That means you can add tie-down points to match your load style, whether you're securing equipment, materials, or bulky gear that never seems to land near the factory tie-downs.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. The curved D-ring gives hooks and straps more room to seat, so you can cinch down hard without fighting a flat ring.Provides a Solid Attachment Point for Straps, Ropes, and Chains: Gives your hooks a dependable place to land when factory tie-downs aren't in the right spot. Forged Steel Resists Wear and Deformation Better Than Standard Steel: Made to hold its shape through repeated loading and tie-down use.
Bolt a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and bolt-on clip give straps, chain, and hooks a solid place to connect, so you spend less time re-hooking and repositioning tie-downs.That means you can add tie-down points to match your load style, whether you're securing equipment, materials, or bulky gear that never seems to land near the factory tie-downs.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down hard without reworking tie-downs.Provides a Solid Attachment Point for Straps, Ropes, and Chains: Gives your hooks a dependable place to land when factory tie-downs aren't in the right spot. Forged Steel Resists Wear and Deformation Better Than Standard Steel: Made to hold its shape through repeated loading and tie-down use.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down hard without shifting tie-downs.Provides a Solid Attachment Point for Straps, Ropes, and Chains: Gives your hooks a dependable place to land when factory tie-downs aren't in the right spot. Forged Steel Resists Wear and Deformation Better Than Standard Steel: Made to hold its shape through repeated loading and tie-down use.
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down without reworking tie-downs.Provides a Solid Attachment Point for Straps, Ropes, and Chains: Gives your hooks a dependable place to land when factory tie-downs aren't in the right spot. Forged Steel Resists Wear and Deformation Better Than Standard Steel: Made to hold its shape through repeated loading and tie-down use.
Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a solid place to connect, so you spend less time re-hooking and repositioning tie-downs.Provides a Solid Attachment Point for Straps, Ropes, and Chains: Gives your hooks a dependable place to land when factory tie-downs aren't in the right spot. Forged Steel Resists Wear and Deformation Better Than Standard Steel: Made to hold its shape through repeated loading and tie-down use.
Single-stud tie-down lets you create an anchor point on your Tow-Rax L-track system. Simply slide anchor into slots along track. Max load is 4,000 lbs when used on a floor-mounted track and 2,000 lbs when used on a wall-mounted track.Features: Anchor loop creates a convenient tie-down point on your Tow-Rax L-track Also for use on O-track circle-style track systems Easy to install and adjust along track Push in on spring-loaded shank while pulling up on bracket, place in track, and slide to desired position Ring swivels 180 degrees so you can attach your rope, strap or bungee from multiple angles Durable steel ring and bracket and yellow-zinc-coated stud are corrosion resistant Specs: Quantity: 1 tie-down anchor Maximum load (break strength): On wall-mounted track: 2,000 lbs On floor-mounted track: 4,000 lbs Safe working load limit (WLL): Vertical: 667 lbs Horizontal: 1,333 lbs Ring dimensions: Outer diameter: 1-1/2" Inner diameter: 1-1/8" Bracket dimensions: 1-1/4" long x 3/4" wide 1-Year limited warranty
This D-ring with a spring-loaded latch lets you create an extra anchor point for loopedtie-downs on your trailer, truck or van. Bolt to most flat, solid surfaces. Perfect for securing tires, gas cans, and other lightweight cargo.
This bolt-on swivel hook lets you add an extra anchor point on your truck, utility trailer or enclosed trailer. A spring-loaded latch secures your looped-end tie-downs and chains. Swivels and rotates so you can attach tie-downs from any angle.Features: Hook adds an extra anchor point on your trailer, truck or van Swivels 360 degrees and rotates 180 degrees for easy attachment Spring-loaded latch keeps your chains and other looped-end tie-downs connected to the hook Bolt-on installation to most flat, solid surfaces Mounting hardware not included Solid steel construction with yellow zinc finish is corrosion-resistant Specs: Quantity: 1 Dimensions: 6-1/2" long x 3-1/2" wide x 3-1/2" tall Mounting hole width: 3/8" Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This heavy-duty O-ring tie-down anchor is perfect for securing a small car, UTV, or other large objects to the E track in your trailer or garage. It provides an attachment point for a ratchet strap, rope, chain, or bungee cord. 6,000 lbs Max load.For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. Zinc plating provides corrosion resistance.For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
... Low-profile design stays out of the way when not in use, and each assembly is rated to 3,300 lbs for reliable tie-down support.Features: L-Track anchor kit provides adjustable tie-down points for securing vehicles and cargo Low-profile design remains unobtrusive when the double-stud fitting is removed, making it ideal for multi-use trailers Over-sized pear rings allow easy hook-up with tie-down straps and hooks Pre-drilled, counter-sunk holes simplify alignment and installation Corrosion-resistant components include aluminum, zinc-plated steel, and stainless steel for long-term reliability Compatibility pairs with Trailblazer tie-downs and other compatible straps and hooks (not included) Complete kit includes 6" L-Track, backer plates, double-stud pear rings, and mounting hardware Specs: Quantity: 4 anchors Rating: 3,300 lbs per assembly Track length: 6" Construction: Aluminum components Zinc-plated steel components Stainless steel components
This O-ring tie-down anchor is perfect for securing an ATV, generator, or other large object to the E track in your trailer or garage. It provides an attachment point for a ratchet strap, rope, chain, or bungee cord. 4,000 lbs Max load.For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Zinc-plated, corrosion resistant steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. Includes backing plate and mounting hardware.For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Black powder coated anchors slide into a 2x4 stake pockets on your flatbed truck or trailer. Movable anchors secure with the included pins and clips, so you can quickly and easily remove and reinstall them as needed. 12,000 lbs Max load.For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
Snap-in mounting point for trailer rails adds a cleat-style anchor for wrapping and tying rope exactly where loads move. No drilling, no permanent hardware, just fast rope management and dependable cargo control.Highlights Take Control of Your Cargo: Create secure, adjustable tie-down points on angle iron trailer supports where you need them. No Permanent Installation Needed: Slide-in design and safety snap pin make securing your load effortless and reliable.
Cap assemblies replace the grease caps on your Dexter or Tie Down Vortex trailer hubs. Includes 2 threaded caps that fit 2,500-lb to 4,200-lb hubs.Features: Replaces the grease caps on your Tie Down (or Dexter) Vortex trailer hubs Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Quantity: 2 caps
This steel D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring. Zinc plating provides corrosion resistance.For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
This kit includes 8 L-Track anchors that create adjustable tie-down points for securing vehicles and cargo in your trailer. Low-profile design stays out of the way when not in use, and each anchor assembly is rated to 3,300 lbs.Features: L-Track anchor kit provides adjustable tie-down points for securing vehicles and cargo Low-profile design remains unobtrusive when the double-stud fitting is removed, making it ideal for multi-use trailers Over-sized pear rings allow easy hook-up with tie-down straps and hooks Pre-drilled, counter-sunk holes simplify alignment and installation Corrosion-resistant components include aluminum, zinc-plated steel, and stainless steel for long-term reliability Compatibility pairs with Trailblazer tie-downs and other compatible straps and hooks (not included) Complete kit includes 6" L-Track, backer plates, double-stud pear rings, and mounting hardware Specs: Quantity: 8 anchors Rating: 3,300 lbs per assembly Track length: 6" Construction: Aluminum components Zinc-plated steel components Stainless steel components
Black powder coated anchor slides into a 2x4 stake pocket on your flatbed truck or trailer. Movable anchor secures with the included pin and clip so you can quickly and easily remove and reinstall it as needed. 12,000-lb Maximum load.Features: Stake pocket anchor provides a tie-down point in your flatbed truck or trailer Movable anchor slides into a standard 2x4 stake pocket Can be easily removed and reinstalled as needed Secures in place with included pin and clip D-ring is hinged so straps can be attached from different angles Black powder coated steel is durable and rust resistant Made in the USA Specs: Dimensions: 8-1/4" tall x 3-1/2" wide Safe working load limit (WLL): 4,000 lbs Maximum load (break strength): 12,000 lbs Inner diameter of D-ring: 3" Shackle diameter: 5/8" Quantity: 1 stake pocket tie-down 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Filters
