Intended for use on 4" x 4" and 4" x 4-1/2" bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.Features: Has 2" square receiver opening, ideal for hitch accessories such as bike racks and cargo carriers Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers Fits 4 x 4-1/2" bumpers when using second set of holes Matte black powder coat finish resists corrosion Includes mounting hardware Weight capacity: 3,500 lbs GTW / 350 lbs TW Specs: Application: 4" x 4" and 4" x 4-1/2" Square RV bumpers Overall dimension: 8" tall x 4" wide x 5-1/4" deep Hitch weight: 7.4 lbs Limited lifetime warranty Note: Bumper weight capacities vary by manufacturer.
Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.Features: Has 2" square receiver opening, ideal for hitch accessories such as bike racks and cargo carriers Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers Powder coat finish resists corrosion Includes mounting hardware Weight capacity: 3,500 lbs GTW / 350 lbs TW Note: For use with RV-approved accessories only. etrailer.com Technical Support At etrailer.com we're committed to the products we sell, and to our customers.
Mount your bike rack or cargo carrier above or below your 4" x 4" RV bumper. Hitch receiver tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.Features: Bumper-mounted hitch receiver mounts above or below your 4" x 4" RV bumper Designed to fit 2" bike racks and cargo carriers Eliminates common failure points caused by load-bearing welds or bolts Clamp-style design reduces noisy rattle and prevents damage to your shank Retention bolt tightens the 2 pressure plates down to reduce bouncing and shaking Base plate helps distribute the load when the pressure plates are engaged to prevent dents Durable, powder coated steel resists rust and corrosion Hitch installs around RV bumper and secures with retention fastener - no drilling required Plates and hardware included Made in the USA Specs: Application: 4" x 4" Square RV bumpers Overall dimension: 9-1/2" tall x 4-3/4" wide x 5" deep Maximum capacity: 400 lbs when evenly distributed Hitch weight: 7.8 lbs Limited lifetime warranty Note: Bumper weight capacities vary by manufacturer.
With a folding mechanism that provides access to rear storage, this universal-fit tire carrier from Stromberg Carlson is an excellent tool for all travelers.Features: Folding mechanism provides access to rear storage areas Built-in stops prevent tire from falling when in folded position Powder coated steel construction is long-lasting Fits most 5, 6 and 8 lug wheels Not for Class A or C motorhome tires or dual rim wheels Top bolt and lug nut attach through a bolt hole on the wheel; bottom bolt, plate and nut further secure the wheel through the larger center hole Simple installation - clamps on to bumper with U-bolts and lug nuts (included) Specs: Fits 4" square and 4-1/4" squarebumpers Overall length of the vertical arm in the vertical position from the top of the arm down to the end of the arm: 18-1/4" Distance from the top of the vertical arm down to the center of the bottom bolt that attaches the arm to the bumper plate: 17" Distance from the top of the vertical arm down to the center of the top pin hole where the pin slides through and holds the arm in the vertical position: 11-3/4" Distance from the top of the vertical arm down to the bottom of the tab on the bumper plate is 13-5/16" Distance from the center of the top lug bolt to the bottom of the bracket plate: 3-1/4" 1-Year limited warranty
This RV bumper receiver adapter is ideal for adding a bike rack, cargo carrier, or other cargo accessory to the back of your RV. The adapter clamps onto a 4" or 4-1/2" square RV bumper and accepts 2" accessories. ... Features: Allows you to add a bike rack or cargo carrier to the back of your RV Fits a standard 4" or 4-1/2" square tube RV bumper Includes durable, corrosion-resistant zinc-plated hardware Carbon steel construction Powder coat finish Maximum weight capacity: 200 lbs or the capacity of your bumper - whichever is lower
Mount your bike rack or cargo carrier above or below your 5.3" RV bumper. Hitch receiver tightens around your heavy-duty RV bumper using a retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.Features: Bumper-mounted hitch receiver mounts above or below your 5-5/16" x 5-5/16" RV bumper Designed to fit 2" bike racks and cargo carriers Strong enough to support most e-bikes Eliminates common failure points caused by load-bearing welds or bolts Clamp-style design reduces noisy rattle and prevents damage to your shank Retention bolt tightens pressure plate down to reduce bouncing and shaking Base plate helps distribute the load when the 2 pressure plates are engaged to prevent dents Durable, powder coated steel resists rust and corrosion Hitch installs around RV bumper and secures with retention fastener - no drilling required Plates and hardware included Made in the USA Specs: Application: 5-5/16" x 5-5/16" Square RV bumpers Overall dimension: 10-3/8" tall x 4-3/4" wide x 6-1/4" deep Maximum capacity: 500 lbs when evenly distributed Hitch weight: 10 lbs Limited lifetime warranty Note: Bumper weight capacities vary by manufacturer.
This powder coated steel receiver clamps around your RV's 4" squarebumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.Features: Trailer hitch receiver clamps onto your RV's rear bumper Provides receiver opening for hitch-mounted accessories - such as bike racks and cargo carriers - or light-duty towing Heavy-duty steel construction Black powder coat provides excellent corrosion resistance Hardware and U-bolts included for installation Specs: Application: 4" x 4" RV bumpers Receiver opening: 2" x 2" Maximum gross trailer weight: 3,500 lbs Do not exceed weight rating of your bumper Maximum tongue weight: When towing a trailer: 350 lbs When using a bike rack or cargo carrier: 100 lbs 1-Year warranty Note: For use with RV-approved accessories only.
Mount your bike rack or cargo carrier above or below your RV bumper. Hitch receiver constricts and tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.Features: Bumper-mounted hitch receiver mounts above or below your 5" x 5" RV bumper Designed to fit 2" bike racks and cargo carriers Eliminates common failure points caused by load-bearing welds or bolts Clamp-style design reduces noisy rattle and prevents damage to your shank Retention bolt tightens pressure plate down to reduce bouncing and shaking Base plate helps distribute the load when the 2 pressure plates are engaged to prevent dents Durable, steel construction resists rust and corrosion Hitch constructs around RV bumper and secures with retention fastener - no drilling required Plates and hardware included Made in the USA Specs: Application: 5" x 5" Square RV bumpers Overall dimension: 10-1/4" tall x 5" wide x 5-3/4" deep Maximum capacity: 400 lbs when evenly distributed Hitch weight: 9 lbs Limited lifetime warranty Note: Bumper weight capacities vary by manufacturer.
Mount your bike rack or cargo carrier above or below your 6" x 6" RV bumper. Hitch receiver tightens around your RV bumper using a heavy-duty retention fastener. Clamp-style design holds your shank in place to reduce rattling and damage.Features: Bumper-mounted hitch receiver mounts above or below your 6" x 6" RV bumper Designed to fit 2" bike racks and cargo carriers Eliminates common failure points caused by load-bearing welds or bolts Clamp-style design reduces noisy rattle and prevents damage to your shank Retention bolt tightens the 2 pressure plates down to reduce bouncing and shaking Base plate helps distribute the load when the pressure plates are engaged to prevent dents Durable, steel construction resists rust and corrosion Hitch constructs around RV bumper and secures with retention fastener - no drilling required Plates and hardware included Made in the USA Specs: Application: 6" x 6" Square RV bumpers Overall dimension: 11" tall x 5" wide x 6-3/8" deep Maximum capacity: 400 lbs when evenly distributed Hitch weight: 10 lbs Limited lifetime warranty Note: Bumper weight capacities vary by manufacturer.
This universal-fit tire carrier from Stromberg Carlson boasts superior strength and is an excellent tool for all travelers.Features: Provides removable mounting point on your trailer or motor home rear bumper for a spare tire Fits most 5-, 6- and 8- lug wheels Not for Class A or Class C tires or dual rim wheels Clamps onto bumper for easy installation Top bolt and lug nut attach through a bolt hole on the wheel Bottom bolt, plate and nut further secure the wheel through the larger center hole Includes U-bolts and lug nuts Specs: Application: 15" to 16" tires Fits 4" squarebumpers Overall height: 18-1/4" Measurement from top of trailer mount bracket to center of tire-mount bracket: 9-1/2" 1-Year limited warranty
Bumper endcap keeps your sewer hose and gear safe inside your RV's squarebumper. This endcap has barbed sections on all four sides to hold the cap in place within the bumper. ... Features: 4" barbed endcap prevents your sewer hose or other items from falling out of your RV's bumper Press-fit plastic uses barbs to fit tightly into the square tube bumper Small hole in each cap provides air circulation and makes it easier to remove Won't fade or crack from UV rays Made in the USA 1-Year warranty Specs: Outer flange dimension: 4" Collar: 3-3/4" 1- Year warranty
Rubber bumper endcap keeps your sewer hose and accessories safe inside a 4-1/4" square RV bumper. This plug-style cap has tabs on two sides that hold it in place. 1/4" tab holes can be drilled in bumper if needed. ... Features: 4-1/4" Bumper cap prevents your sewer hose or other items from falling out of your RV's bumper Press-fit rubber cap fits tightly to secure your gear Small hole in each cap provides air circulation and makes it easier to remove Tabs require 1/4" holes in bumper, which can be drilled out Won't fade or crack from UV rays Made in the USA Specs: Outer flange dimension: 4-1/4" Collar: 4" Tab diameter: 1/4" 1- Year warranty
Rubber bumper endcap keeps your sewer hose and accessories safe inside your 4" square RV bumper. The rubber cap fits tightly into the tube for a sure fit. ... Features: 4" Bumper cap prevents your sewer hose or other items from falling out of your RV's bumper Press-fit rubber cap fits tightly to secure your gear Small hole in each cap provides air circulation and makes it easier to remove Won't fade or crack from UV rays Made in the USA Specs: Outer flange dimension: 4" Collar: 3-3/4" 1- Year warranty
Rubber bumper endcap keeps your sewer hose and accessories safe inside a 4" square RV bumper. This plug-style endcap has tabs on two sides that hold it in place. 1/4" tab holes can be drilled in bumper if needed. ... Features: 4" Bumper cap prevents your sewer hose or other items from falling out of your RV's bumper Press-fit rubber cap fits tightly to secure your gear Small hole in each cap provides air circulation and makes it easier to remove Tabs require 1/4" holes in bumper, which can be drilled out Won't fade or crack from UV rays Made in the USA Specs: Outer flange dimension: 4" Tab diameter: 1/4" 1- Year warranty
You already have hydraulic power, so why keep cranking? This kit lets you tap into your dump trailers existing system, adding a hydraulic A-frame jack that runs off the same circuit. No extra power units needed. Includes jack & 32" hose kit.Highlights Bolt-On A-Frame Design: Installs easily on A-frame trailers with included mounting hardware Built for Dump Trailers: Lifts up to 7,000 lbs with smooth, powerful hydraulic action Uses Existing Hydraulics: Connects to your dump trailers pump with no extra wiring or power unit Smooth, Reliable Lifting: Glide bearings reduce friction and wear for longer jack life Complete Hose and Fitting Kit: Includes everything needed to connect to your hydraulic system Made in the USA: Built with high-quality seals and domestically sourced steel Features to Know About Hydraulic Power Without the Extra Work This A-frame jack is built for bumper pull dump trailers and makes lifting heavy loads easy. With a 7,000 lb capacity and 24" of travel, it handles the job without the hassle.
Looking for a simple way to keep your door open without damage? This 3-3/4" stainless steel holder uses a rubber bumper to help protect surfaces while holding your door in place. It's easy to install and keeps things steady when you need it.Highlights Keeps Door Open: Secures your RV entry door in place while it's open. Reduces Surface Contact: Rubber bumper limits direct contact when the door is open. Resists Rust: Stainless steel won't corrode and seize like plated holders. 3-3/4" Length: Sized for standard door holder mounting setups.
No more sweat and crank struggles! With a simple toggle switch mounted behind the tank, this jack takes smooth and powerful to the next level. Easy install - fits right into the existing holes from most standard tongue jacks. Upgrade made simple.Features: Hydraulic jack is built for bumper pull trailers Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Easy bolt-on installation, no welding required Complete installation package included Includes hardware, mounting brackets, hydraulic lines, fittings, battery cable, and breaker Requires only 2 quarts of ATF Dexron III (not included) for operation Easy to use Weatherproof control box with a keyed lockout extends/retracts with the flip of a toggle switch 12-Volt battery source is required Round tube Black gloss powder coated finish keeps everything protected and looking good Made in the USA Specs: Lift capacity: 8,000 lbs Working pressure load: 2,500 psi Reservoir capacity: 98 oz Footplate diameter: 7" 1-Year warranty on cylinder
Clamp this durable steel, folding spare tire carrier onto your trailer or RV bumper. Fits 4" wide, rear, box-style bumpers. Holds most standard automotive and camper tires.Features: Provides removable mounting point on your trailer or motor home rear bumper for a spare tire Swings down to allow quick, easy access to rear storage Remove pull pin at base and fold carrier down Holds most Kelsey-Hayes-style 5-, 6- and 8-lug automotive wheels and Fayette-type travel trailer wheels Will not fit 5-on-5 bolt pattern wheels Not for Class A or C motorhome tires or dual rim wheels Clamps onto 4" wide box bumpers Constructed of heavy-duty steel Powder coated for premium rust resistance Capacity: 60 lbs Lifetime warranty
When your door swings open too hard, it can dent or scuff the sidewall. This 2-1/4" rubber bumper absorbs impact and helps protect surfaces from damage. It's an easy-to-install solution that helps prevent scuffs and dents over time.Protects Sidewall Surfaces: Helps prevent dents and scuffs from door contact. 2-1/4-Inch Size: Sized for standard bumper mounting locations. Includes Mounting Fasteners: Comes with hardware so you can install it right away. Specs Dimensions: 2-1/4" Construction: Material: Rubber Included Components: 1 door bumper Mounting fasteners
Brophy rigid mount spare tire carrier for 4" or 4-1/2" RV bumpers. Fits wheels up to 17-1/2". Lockable for security (lock sold separately). Black powder coat finish resists rust and corrosion.Features: Carry your spare tire with this Brophy rigid mount spare tire carrier Mounts on RV or mini-motorhome bumpers measuring 4" or 4-1/2" Fits wheels up to 17-1/2" Lockable for security (lock sold separately) Resists corrosion with black powder coat finish Made in the USA
Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.Not rated for towing. Not for use on decorative aluminum bumper covers.
You already have hydraulic power, so why keep cranking? This kit lets you tap into your dump trailers existing system, adding a hydraulic A-frame jack that runs off the same circuit. No extra power units needed. Includes jack & 17" hose kit.Highlights Bolt-On A-Frame Design: Installs easily on A-frame trailers with included mounting hardware Built for Dump Trailers: Lifts up to 7,000 lbs with smooth, powerful hydraulic action Uses Existing Hydraulics: Connects to your dump trailers pump with no extra wiring or power unit Smooth, Reliable Lifting: Glide bearings reduce friction and wear for longer jack life Complete Hose and Fitting Kit: Includes everything needed to connect to your hydraulic system Made in the USA: Built with high-quality seals and domestically sourced steel Features to Know About Hydraulic Power Without the Extra Work This A-frame jack is built for bumper pull dump trailers and makes lifting heavy loads easy. With a 7,000 lb capacity and 24" of travel, it handles the job without the hassle.
Attaches to RV bumper to provide a 2" receiver opening that works with hitch-mounted bike racks. Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers.Features: 2" Hitch receiver opening to accommodate hitch accessories Solid steel construction Powder coated to resist corrosion For use with up to a 4-bike non-folding, standard bike rack Not to be used for towing or with cargo carriers For use above the bumper only Never exceed the bumper's stated capacities Attaches to bumper using 4" bolts (included) Specs: Designed for 4" x 4" and 4-1/2" x 4-1/2" continuous-welded steel bumpers Not for use on aluminum or spot-welded bumpers Load capacity: 200 lbs Distance from the center of hitch pin hole to end of receiver: 3" Mounting plate measures 6" x 6" Note: Not to be used with an adapter or extender.
Want to protect your RV from door damage? This 1" rubber bumper helps absorb impact when your door swings open, keeping your sidewall safe. It's an easy-to-install solution that helps prevent scuffs and dents over time.Protects Sidewall Surfaces: Helps prevent dents and scuffs from door contact. 1" Size: Sized for standard bumper mounting locations. Includes Mounting Fasteners: Comes with hardware so you can install it right away. Specs Dimensions: 1" Construction: Material: Rubber Included Components: 1 door bumper Mounting fasteners
Filters
