Replaces the Nason hydraulic high pressureswitch with Deutsch DT-04-2P all-weather connector. This component is used most commonly on Lippert hydraulic slide-out units but can also be found on hydraulic leveling systems.Specs: Dimensions: 3.5" tall x 1.5" diameter 2,150 psi Features: Replaces the Nason hydraulic high pressureswitch with Deutsch DT-04-2P all-weather connector Standard on almost all hydraulic slide-outs and leveling systems since 2007 Includes 1 switch and 1 all-weather connector Made in the USA
This stop light switch kit is designed for towed vehicles that do not have functional brake lights when the engine is off. Works with Demco SBS Air Force One supplemental braking system to notify you when the brakes are applied in your towed car.Just connect the switch to your towed car's battery and to its output air line. This way the switch will sense via the air line when the car's brake pedal is applied, and it will then send a signal to the monitoring system.
This replacement pressureswitch is designed to operate your air helper springs at the correct pressure level, activating the air compressor at 90 psi and turning the compressor off at 120 psi. ... Features: Replacement pressureswitch for Firestone air helper spring suspension system Operates air springs at correct pressure Turns compressor on at 90 psi Turns compressor off at 120 psi 1 Threaded male connection for mounting to 1/8 NPT (National Pipe Thread) valve Brass construction Specs: Application: Air compressor for Firestone air helper spring system 2-Year limited warranty Note: The construction material of the fittings may vary.
Replaces the sealed pressureswitch for your Firestone air compressor kit.Features: Replaces the sealed pressureswitch for your Firestone air compressor kit 110-145 Psi Quantity: 1 sealed pressureswitch
Replaces the 110-145 PSI pressureswitch on your Air Lift onboard air compressor system with tank. Maintains proper tank pressure by automatically cycling the compressor.Features: Replaces the pressureswitch on your Air Lift onboard air compressor system with tank Automatically cycles compressor to maintain tank pressure 110-145 PSI operating range Made in the USA Fits: Air Lift onboard air compressor systems with tank
Sealed pressureswitch for your onboard ARB compressor that opens and closes your Air Locker differential system. This model opens at 150 psi, closes at 135 psi, and is specified for ARB's CKMT-series compressors.Features: 1/4" NPT thread-in pressureswitch limited to specified open/close pressure settings ARB's CKMT-series compressors use switches rated 150 psi to open, and 135 psi to close an Air Locker Pressure range may also be suited for other limited uses, such as psi-range specific air tools Two-pole wiring prong attaches to the ARB wiring loom (180415 - sold separately) 1-Year warranty
This assembly includes an air pressure gauge that lets you monitor the pressure in your Bulldog Winch on-board air tank, a switch to turn the compressor on and off, and a bracket for under-dash mounting.Features: Single-needle, in-cab gauge lets you monitor the pressure in your on-board Bulldog Winch air tank Analog mechanical gauge is lighted for viewing at night Black powder coated steel is durable and corrosion resistant Rocker switch lets you turn on-board 12-volt bulldog Winch compressor on and off On and Off positions with LEDs are easy to see at night Meets IP68 specifications for water and dust resistance Bracket installs easily under your dash with included hardware Textured, black powder coated steel is corrosion resistant Specs: Pressure gauge: Maximum air pressure: 200 psi Dimensions: 2" diameter x 3" deep Cable length: 11-3/4" Compressor switch: Power draw: 20 amps at 12v DC Dimensions: 2" tall x 1" wide Bracket dimensions: 4" long x 2-7/8" deep 1-Year limited warranty
Adding a tank to your Pacbrake Paddle Valve air system means the compressor needs automatic pressure control. This switch turns compressor operation on around 105 psi and back off around 135 psi to maintain the normal pressure cycle.Highlights Add Automatic Tank Pressure Control: Tank pressure triggers compressor operation instead of relying on manual cycling. Start Compressor Operation Around 105 psi: Switches ON at 105 psi ±10 psi to restore tank pressure.
This switch automatically turns your Bulldog Winch air compressor on when pressure drops below 85 psi and automatically turns it off when it reaches 105 psi. ... Features: Switch automatically turns your air compressor on when pressure drops below 85 psi and automatically turns it off when it reaches 105 psi Sealed to prevent damage from water and dirt exposure Included leads let you connect directly to air compressor Works with 12-volt or 24-volt systems Specs: NPT thread: 1/4" Restart pressure: 85 psi Turn-off pressure: 105 psi Max amps: 30 Dimensions: 2-1/4" long x 7/8" diameter Cable length: 5-1/2" 1-Year limited warranty
Replaces the sealed pressureswitch on your Firestone Remote Air Command kit. It turns on your compressor at 90 psi and shuts off the compressor at 120 psi. Threads are 1/8" male NPT.Features: Replaces sealed pressureswitch for Firestone Remote Air Command Fits models F2546 and F2547 Turns on compressor at 90 psi and shuts off compressor at 120 psi Installs in-line between the air compressor and tank One wire connects to relay Other wire connects to ground 1/8" Male NPT Includes 1 pressureswitch
This switch automatically turns your Bulldog Winch air compressor on when pressure drops below 165 psi and automatically turns it off when it reaches 200 psi. ... Features: Switch automatically turns your air compressor on when pressure drops below 165 psi and automatically turns it off when it reaches 200 psi Included leads let you connect directly to air compressor Works with 12-volt or 24-volt systems Specs: NPT thread: 1/4" Restart pressure: 165 psi Turn-off pressure: 200 psi Max amps: 30 Dimensions: 2-1/2" long x 1-1/8" diameter Cable length: 5-5/8" 1-Year limited warranty
This switch automatically turns your Bulldog Winch air compressor on when pressure drops below 110 psi and automatically turns it off when it reaches 145 psi. ... Features: Switch automatically turns your air compressor on when pressure drops below 110 psi and automatically turns it off when it reaches 145 psi Included leads let you connect directly to air compressor Works with 12-volt or 24-volt systems Specs: NPT thread: 1/4" Restart pressure: 110 psi Turn-off pressure: 145 psi Max amps: 30 Dimensions: 2-1/2" long x 1-1/8" diameter Cable length: 5-5/8" 1-Year limited warranty
This assembly includes a dual air pressure gauge that lets you monitor the pressure in 2 Bulldog Winch on-board air tanks, a switch to turn the compressor on and off, and a bracket for under-dash mounting.Features: Dual-needle, in-cab gauge lets you monitor the pressure in 2 on-board Bulldog Winch air tanks Analog mechanical gauge is lighted for viewing at night Black powder coated steel is durable and corrosion resistant Rocker switch lets you turn on-board 12-volt bulldog Winch compressor on and off On and Off positions with LEDs are easy to see at night Meets IP68 specifications for water and dust resistance Bracket installs easily under your dash with included hardware Textured, black powder coated steel is corrosion resistant Specs: Pressure gauge: Maximum air pressure: 150 psi Dimensions: 2" diameter x 3" deep Cable length: 11-3/4" Compressor switch: Power draw: 20 amps at 12v DC Dimensions: 2" tall x 1" wide Bracket dimensions: 4" long x 2-7/8" deep 1-Year limited warranty
This bracket lets you mount the 2" air pressure gauge and switch for your Bulldog Winch air compressor under your dash.Features: Bracket lets you mount a 2" air pressure gauge and switch on your air compressor under your dash Works with BDW42054, BDW42055, and BDW20364 Install easily with included hardware Steel construction with textured black powder coat finish resists corrosion Specs: Dimensions: 4" long x 2-7/8" deep 1-Year limited warranty
This switch automatically turns your Bulldog Winch air compressor on when pressure drops below 90 psi and automatically turns it off when it reaches 120 psi. ... Features: Switch automatically turns your air compressor on when pressure drops below 90 psi and automatically turns it off when it reaches 120 psi Included leads let you connect directly to air compressor Works with 12-volt or 24-volt systems Specs: NPT thread: 1/4" Restart pressure: 90 psi Turn-off pressure: 120 psi Max amps: 30 Dimensions: 2-1/4" long x 7/8" diameter Cable length: 5-1/2" 1-Year limited warranty
This assembly includes a dual air pressure gauge that lets you monitor the pressure in 2 Bulldog Winch on-board air tanks, a switch to turn the compressor on and off, and a bracket for under-dash mounting.Features: Dual-needle, in-cab gauge lets you monitor the pressure in 2 on-board Bulldog Winch air tanks Analog mechanical gauge is lighted for viewing at night Black powder coated steel is durable and corrosion resistant Rocker switch lets you turn on-board 12-volt bulldog Winch compressor on and off On and Off positions with LEDs are easy to see at night Meets IP68 specifications for water and dust resistance Bracket installs easily under your dash with included hardware Textured, black powder coated steel is corrosion resistant Specs: Pressure gauge: Maximum air pressure: 200 psi Dimensions: 2" diameter x 3" deep Cable length: 11-3/4" Compressor switch: Power draw: 20 amps at 12v DC Dimensions: 2" tall x 1" wide Bracket dimensions: 4" long x 2-7/8" deep 1-Year limited warranty
This assembly includes an air pressure gauge that lets you monitor the pressure in your Bulldog Winch on-board air tank, a switch to turn the compressor on and off, and a bracket for under-dash mounting.Features: Single-needle, in-cab gauge lets you monitor the pressure in your on-board Bulldog Winch air tank Analog mechanical gauge is lighted for viewing at night Black powder coated steel is durable and corrosion resistant Rocker switch lets you turn on-board 12-volt bulldog Winch compressor on and off On and Off positions with LEDs are easy to see at night Meets IP68 specifications for water and dust resistance Bracket installs easily under your dash with included hardware Textured, black powder coated steel is corrosion resistant Specs: Pressure gauge: Maximum air pressure: 150 psi Dimensions: 2" diameter x 3" deep Cable length: 11-3/4" Compressor switch: Power draw: 20 amps at 12v DC Dimensions: 2" tall x 1" wide Bracket dimensions: 4" long x 2-7/8" deep 1-Year limited warranty
This replacement pressureswitch is designed to operate your air helper springs at the correct pressure level, activating the air compressor at 100 psi and turning the compressor off at 150 psi. ... Features: Replacement pressureswitch for Firestone air helper spring suspension system Operates air springs at correct pressure Turns compressor on at 100 psi Turns compressor off at 150 psi 1 Threaded male connection for mounting to 1/8 NPT (National Pipe Thread) valve Brass construction Specs: Application: Air compressor for Firestone air helper spring system 2-Year limited warranty Note: The construction material of the fittings may vary.
... More reliable than a portable system, cheaper than a permanent one. Pressure reducer protects cars with active or continuous-power-assist brakes, such as hybrids, from damage.The pressure reducer lets you set the BrakeMaster to the right pressure to avoid overbraking. How Does the BrakeMaster Work? Roadmaster's BrakeMaster offers you truly proportional braking, meaning that when you apply the brakes in your motorhome, the braking system will engage the brakes of the toad (towed vehicle) at the same time, with the same intensity.
More reliable than a standard portable system, lightweight actuator brakes your car perfectly in sync with your motorhome. Pressure reducer protects cars with active or continuous-power-assist brakes, such as hybrids, from damage.To achieve proportional braking, the air compressor installed on the coach supplies the air pressure that will activate the braking cylinder. It connects to the proportioning valve (also installed on the motorhome), which measures the pressure with which the hydraulic brakes are applied in your RV.
Enjoy the comfortable water pressure of home with this self-priming, on-demand water pump. Supplies consistent water flow for up to 4 fixtures. Includes a check valve to prevent backflow.The pressureswitch also protects the pump motor from overheating when the water has been on for a while. So, if one of your kids leaves the faucet on, you're going to town with the washdown hose, or your teen takes a long shower (despite your asking them to conserve water), the pump will kick off when it starts to get hot.
This dual-needle, in-cab gauge with 2 air-line attachments lets you monitor the pressure in 2 Bulldog Winch on-board air tanks. The 2" diameter analog gauge is lighted for viewing at night.Features: Dual-needle, in-cab gauge with 2 air-line attachments lets you monitor the pressure in 2 Bulldog Winch on-board air tanks Analog mechanical gauge is lighted for viewing at night Connection kit, 2 air hoses, and 2 sets of fittings included Black powder coated steel is durable and corrosion resistant Specs: Maximum air pressure: 150 psi Dimensions: 2" diameter x 3" deep Cable length: 11-3/4" 1-Year limited warranty
Filters
