Full-contact, weatherproof heating pad helps prevent your RV gray water or black water dump valve pipe or elbow from freezing. The pad wires to a wall switch inside your RV. Easy, peel-and-stick installation.The full-contact ThermaHeat heater pad will prevent this by keeping your pipe warm during freezing temperatures. It can also completely thaw out a pipe if it's already frozen, assuming that it hasn't been damaged.
Full-contact, weatherproof heating pad helps prevent your RV gray water or black water dump valve pipe or elbow from freezing. The pad wires to a wall switch inside your RV. Easy, peel-and-stick installation.The full-contact ThermaHeat heater pad will prevent this by keeping your pipe warm during freezing temperatures. It can also completely thaw out a pipe if it's already frozen, assuming that it hasn't been damaged.
Need to bypass your RVs water heater for winterizing? This PEXLock valve makes it simple to divert water between lines. Install with pliers for quick seasonal prep with no special tools and less stress.Features to know about When to Use a Bypass Valve Getting ready to winterize your RV or need to isolate the water heater for service? This Flair-It PEXLock bypass valve makes it easy. Just cut your 1/2" PEX, PERT, or polyvinyl pipes, slide on the PEXLock clamps, push the pipes onto the barbs, and squeeze the clamps closed with pliers.
... This Flair-It bypass valve lets you reroute water around your water heater in minutes. Just hand-tighten nuts for a leak resistant seal and enjoy tool-free prep for every season.Features to know about When to Use a Bypass Valve Getting your RV ready for winter or need to isolate your water heater for maintenance? This Flair-It bypass valve makes it easy to reroute water between lines. Just cut your 1/2" PEX, PB, or polyvinyl pipe, slide on nuts, push pipe onto the barbs, and hand-tighten the compression nuts for a tight, leak resistant fit.
Need to join a 1/2" water line to a threaded fitting in a cramped spot? The Flair-It swivel elbow makes it easy. Thread on the swivel nut, hand-tighten the barb side, and get a leak resistant seal in minutes with no special tools needed.The 1/2" FPT swivel nut lets you thread onto any 1/2" MPT fitting without stressing your line, while the barbed end secures your pipe with a simple hand-tightened compression nut. Ideal for water heaters, filters, or any fixture where space is tight and reliability matters.
Need to connect a 1/2' water line to a threaded fitting in your RV? This Flair-It PEXLock swivel adapter installs fast with clamp rings and pliers so you can get back to enjoying your adventures.Perfect for water heaters, filters, or appliance upgrades in your RV. Specs Fitting type: PEXLock swivel female adapter Connection size: 1/2" barb x 1/2" female pipe thread (FPT) Compatible pipe: 1/2" PEX, PERT tubing, IAPMO approved polyvinyl tubing Material: Reinforced polyoxymethylene (POM) Maximum temperature: 180 F Maximum pressure: 100 PSI
Need to connect a 1/2' PEX water line to a 1/2" threaded fitting? This Flair-It PEXLock adapter snaps on fast with a clamp and pliers. Built for RV upgrades and repairs, no special tools required.The 1/2" female NPT end threads onto any 1/2" male fitting; great for water heaters, filters, or any RV plumbing upgrade. No special tools required. Specs Fitting type: PEXLock female adapter Connection size: 1/2" barb x 1/2" female pipe thread (FPT) Compatible pipe: 1/2" PEX, PERT tubing, IAPMO approved polyvinyl tubing Material: Reinforced polyoxymethylene (POM) Maximum temperature: 180 F Maximum pressure: 100 PSI
Need to connect a 3/8' water line to a threaded fitting in your RV? The Flair-It PEXLock swivel adapter installs fast with clamp rings and pliers. Get a leak resistant seal and get back to enjoying your next adventure.Perfect for water heaters, filters, or appliance upgrades in your RV. Specs Fitting type: PEXLock swivel female adapter Connection size: 3/8" barb x 1/2" female pipe thread (FPT) Compatible pipe: 3/8" PEX, PERT tubing, IAPMO approved polyvinyl tubing Material: Reinforced polyoxymethylene (POM) Maximum temperature: 180 F Maximum pressure: 100 PSI
Need to connect your 1/2" PEX water line to a 1/2" threaded fitting? This Flair-It PEXLock adapter snaps on with a clamp and pliers. Fast, secure, and built for RV upgrades or repairs.The 1/2" male NPT side threads into any 1/2" female fitting; perfect for water heaters, filters, or plumbing upgrades. Specs Fitting type: PEXLock Male Adapter Connection size: 1/2" barb x 1/2" Male Pipe Thread (MPT) Compatible pipe: 1/2" PEX, PERT tubing, reinforced vinyl, IAPMO approved polyvinyl tubing Material: Reinforced polyoxymethylene (POM) Maximum temperature: 180 F Maximum pressure: 100 PSI
Diverter valve assembly allows you to manage a fresh water flow into your water heater. It is used for winterizing and storage. Set the lever to bypass water from entering the hot water tank so you can use antifreeze without damaging it.Features: Use this diverter valve assembly to manage fresh water flow into your water heater Bypass is used for antifreeze use during winterization or storage When installed, you can direct water from your fresh water system into your RV's water heater or bypass it Installing the mounting plate is optional, but it offers visual instruction for use Direct replacement will utilize same fittings and hoses as your identical original Assembled unit has been factory tested for zero leakage Includes mounting hardware Made in the USA Specs: Mounting plate dimensions: 5-1/8" tall x 2-5/8" wide 1/2" hose or PEX pipe connections (clamp-type) 1- Year warranty
Building a new rig or updating old lines? This 1/2" SafePEX tubing is safe for hot or cold water, bends easily around tight corners, and won't change the taste of your water. Upgrade your plumbing so you can enjoy the adventure ahead.Features to know about Why Choose SafePEX Tubing? If you're swapping out old pipes or adding new ones, SafePEX takes the worry out of plumbing - no cracks, no weird tastes, just solid performance and water you can trust.
Building a new rig or updating old lines? This 1/2" SafePEX tubing is safe for hot or cold water, bends easily around tight corners, and won't change the taste of your water. Upgrade your plumbing so you can enjoy the adventure ahead.Features to know about Why Choose SafePEX Tubing? If you're swapping out old pipes or adding new ones, SafePEX takes the worry out of plumbing - no cracks, no weird tastes, just solid performance and water you can trust.
When winterizing your RV, don't waste antifreeze by letting it fill up your RV's water heater tank. Instead, use this permanent bypass kit to keep the antifreeze in your RV's water lines. Valves allow fast, easy activation every winter.Without a bypass, up to 6 gallons of antifreeze can be wasted by collecting in your RV's water heater tank instead of moving throughout your pipes. Use this bypass kit to keep antifreeze out of your tank and inside your water lines.
When winterizing your RV, don't waste antifreeze by letting it fill up your water heater tank. Instead, use this bypass kit and keep the antifreeze in your RV's water lines. Set up this seasonal kit in the fall and remove it in the spring.Without a bypass, up to 6 gallons of antifreeze can be wasted by collecting in your RV's water heater tank instead of moving throughout your pipes. Use this bypass kit to keep antifreeze out of your tank and inside your water lines.
When winterizing your RV, don't waste antifreeze by letting it fill up your RV's water heater tank. Instead, use this permanent bypass kit to keep the antifreeze in your RV's water lines. Valves allow fast, easy activation every winter.Without a bypass, up to 10 gallons of antifreeze can be wasted by collecting in your RV's water heater tank instead of moving throughout your pipes. Use this bypass kit to keep antifreeze out of your tank and inside your water lines.
When winterizing your RV, don't waste antifreeze by letting it fill up your RV's water heater tank. Instead, use this permanent bypass kit to keep the antifreeze in your RV's water lines. Valve allows fast, easy activation every winter.Without a bypass, up to 10 gallons of antifreeze can be wasted by collecting in your RV's water heater tank instead of moving throughout your pipes. Use this bypass kit to keep antifreeze out of your tank and inside your water lines.
Pipe plug lets you stop the flow through your freshwater lines. Commonly used when doing repair or remodeling work and you want to cap off a line that will need to be pressurized before you finish.Features: Pipe plug closes off a pressurized water line permanently or during repairs Also used as a test cap to check for leaks in new plumbing 1/2" Male NPT fitting threads onto water hose or fitting PVC plastic construction
Adapts a 1-1/2" PVC pipe in your RV's fresh water system to a 1-1/2" NPT connection. PVC cement sold separately.Features: Adapter puts a 1-1/2" male NPT connection on the end of 1-1/2" pipe Great for fresh water tank fill/drain ports, inline valves or distribution headers, or water filter housings in RVs that have rigid, PVC piping Hub connection attaches to pipe with PVC cement (sold separately)
... This Flair-It compression fitting installs by hand. Just slip the nuts and rings on the pipes, and tighten the nuts for a secure, leak resistant seal with no special tools.Just slide a nut onto each copper pipe, push pipes into the fitting, and hand-tighten the compression nuts for a leak resistant seal. No soldering or wrenches needed, so you can fix leaks or swap pipe sections with confidence.
... This Flair-It compression fitting installs by hand. Just slip the nuts and rings on the pipes, and tighten the nuts for a secure, leak resistant seal with no special tools.Just slide a nut onto each copper pipe, push pipes into the fitting, and hand-tighten the compression nuts for a leak resistant seal. No soldering or wrenches needed, so you can fix leaks or swap pipe sections with confidence.
... Quickly changes the flow to prevent antifreeze from getting into your hot water heater.Features: Diverter valve lets you change the flow of water in your RV's fresh-water system Often installed near your hot water heater as a bypass to keep antifreeze out when winterizing Also used to create a new input to siphon antifreeze into your fresh-water lines Knob rotates to change flow from one of one of two inputs to a single output Also lets you change flow from one input to one of two outputs Fitting size: 1/2" MPT x 1/2" MPT x 1/2" FPT 1-Year warranty
Need to join 3/4" PEX to a flex copper line in your RV? The Flair-It male adapter installs in minutes. Just hand-tighten for a leak resistant seal and a smooth transition from plastic to copper.Features: Adapter lets you join PEX pipe to flex copper pipe in your RV fresh-water system 3/4" MIP fits copper pipe with a 3/4" FIP connection 1/2" Barbed connection with compression nut means you don't need any tools for a secure fit Works with PEX pipes, the old gray PB pipes, and polyvinyl tubing Polyoxymethylene construction is durable and resistant to stress cracking Highlights Join PEX to Flex Copper: Adapter transitions your 3/4" PEX line to flex copper pipe with a 3/4" FIP connection.
Replacing old gray PB pipe with PEX in your RV? This Flair-It coupler makes the transition easy. Slide on the nuts, press on the pipes, hand-tighten for a leak resistant seal, and travel with peace of mind.Highlights Join PB and PEX Lines Fast: Transition from 3/4" PB to 3/4" PEX pipe with a secure, tool-free coupler. Barbs Designed for a Tight Fit: PB barb is slightly larger to grip old gray pipe, PEX side fits new lines with no leaks.
Need to connect a 3/4' PEX water line to a 3/4' threaded hose or fitting? The Flair-It male adapter goes on fast. Just press on and hand-tighten for a leak resistant seal. You'll be ready to head out for your next adventure in no time.Just slide the nut onto the pipe, push your pipe onto the barb, and hand-tighten the compression nut for a leak resistant seal. If attaching the barbed end to a gray PB pipe, you must use a Flair-It PB adapter sleeve (FL72VR sold separately).
Filters
