A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
A 3-piece design makes this an all-around performer. The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
Upgrade the strength and durability of your stabilizer jack feet by adding these permanent SnapJack feet to the bottom. Increased surface area creates a more robust footprint compared to a standard foot. Ideal for sloped or uneven surfaces.Features: SnapJack foot improves the stability of your stabilizer jack (sold separately) Thicker and stronger than standard feet Improved stability and grip on uneven terrain Anti-slip base pads are made from a durable recycled rubber Withstands heavy-duty use for years to come Prevents slippage when stabilizing your camper Provides significantly more grip compared to using wooden blocks Added height on the SnapJack feet prevents the stabilizers from being over-extended Includes all hardware to install SnapJack feet to stabilizers Made in the USA Specs: Applications: Lippert PSX1 Lippert PSX2 Lippert Quick Drop Stabilizer Rock Solid Stabilizer Systems Quantity: 4 feet Overall dimensions: 8" wide x 8" long x 2-3/4" tall Foot dimensions: 5-1/2" diameter x 1/4" tall Weight: 5.4 lbs each 2-Year limited warranty
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking. Corrosion-Resistant Finish: E-coat and matte black powder coat help prevent rust and corrosion.
Manual jacks get old fast when you're trying to hitch up or level. This 3,500 lb electric A-frame jack plugs into your 7-way for push-button lifting and includes an integrated SnapPad for a wider, more stable base on soft or uneven ground.Easy Drop Leg Adjustment: Extends up to 9.75" for extra lift with pull-pin operation. SnapPad Stability Upgrade: Rubber pad increases footing and helps prevent sinking. Corrosion-Resistant Finish: E-coat and matte black powder coat help prevent rust and corrosion.
Setting jacks on soft ground can cause them to sink and throw off your setup. These large jack pads spread the load over a wider surface, spreading the load across a wider surface so jack feet don't press into dirt or gravel.Highlights Larger Footprint Under Jacks: Bigger pad size spreads weight across more surface on soft ground. Reduces Jack Sink-In: Designed to support stabilizer jacks and limit sinking on uneven surfaces.
Small stabilizer feet can press into soft ground and shift your setup. These compact jack pads add a base under each jack, spreading the load so your stabilizers hold position.Highlights Supports Stabilizer Jacks on Soft Ground: Pads sit under jack feet to distribute weight across a wider area. Compact Size for Easy Placement: Smaller footprint fits tight spaces under stabilizers.
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 4 pads 2-Year warranty
... High-impact polyurethane resists damage and is treaded for maximum grip. Ramps, chocks, and jack pads nest together for compact storage.Features: Comprehensive kit easily levels your trailer or RV Includes 2 levelers, 2 wheel chocks, and 4 jack pads Compact levelers help your trailer stay flat on any surface Adjust to any height up to 4-1/2" Works with tires sizes up to 32" wide Ribbed bottom keeps ramps firmly in place on the ground Treaded surface grips your tire for added stability Heavy-duty wheel chocks keep your trailer from rolling when it's parked and leveled Drainage holes prevent water buildup from reducing traction Jack pads serve as stabilizing cushions so the leveling system won't sink into the ground Connectable design allows the system to nest together for compact storage High-impact polyurethane holds up under tremendous weight Resists scuffs and abrasions Specs: Quantity: 2 leveling ramps, 2 wheel chocks, and 4 jack pads Ramp dimensions: 16-9/16" long x 14-9/16" wide x 4-1/2" tall System weight: 9.9 lbs 1-Year warranty
Replace the bricks and blocks normally needed when positioning your trailer jack with this base pad. 7" Tall pad works as a jack stand to support your trailer tongue's weight during storage.Features: Base pad works as a jack stand to provide a platform that supports the weight of your trailer tongue Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs Dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Quantity: 1 pad 2-Year warranty
Base pad replaces the bricks and blocks normally needed when positioning your trailer jack. 8" Tall pad works as a jack stand to support your trailer's tongue or stabilizer jack.Features: Base pad works as a jack stand to provide a platform that supports the weight of your tongue or stabilizer jack Minimizes amount of cranking needed to position jack Eliminates the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pad easy to carry and retrieve from under your RV Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 1 pad Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when 2 are stacked: 14" 2-Year limited warranty
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. Includes SnapJack feet for improved stability and grip on uneven terrain.
This roof-rack system attaches directly to the OEM fixed mounting points of your Ford Transit Connect van. The rack includes a pair of Heavy-Duty 50" long, square, aluminum crossbars with built-in channels for mounting Rhino-Rack HD accessories.Features: Fixed-point crossbar system designed specifically for your vehicle 2 Heavy-Duty silver, square crossbars hold ladder racks, conduit cases and other work accessories Lightweight, structural-grade, extruded aluminum construction for strength, durability and maximum carrying capability Built-in C-channel on top of each bar is designed for mounting Rhino-Rack Heavy-Duty accessories and carriers Rubber strip in the channel helps to cushion load and provide slip resistance Can be cut to accommodate track-mounted accessories and carriers Built-in C-channel on bottom of each bar for mounting to roof-rack legs 4 Roof-rack legs attach to van's OEM fixed mounting points with pads and bolts Rounded tops on leg bases pivot to ensure that crossbars are level Custom-fit pads complement the style lines of your roof UV-resistant, glass-reinforced nylon construction Built-in security hardware deters theft - leg bolts require special tool (included) to loosen Quick installation in about 15 minutes; removal in 5 minutes Specs: Weight capacity: 220 lbs Always observe your vehicle's maximum roof load capacity Crossbar dimensions: 50" long x 1-5/8" wide x 1-7/8" tall Front leg height: 3" Rear leg height: 2" T-slot dimensions: 1-3/8" wide x 5/8" tall T-slot top opening: 13/16" Underbar slot: Full length Limited lifetime warranty
Mount this durable poly plastic pad to your boat trailer's frame or axle to add a layer of protection between the frame or axle and your boat.Features: Poly plastic pad protects hull or keel of your boat Helps to absorb road shock if boat makes contact with it during trailering Mounting holes allow for simple installation onto crossmember - hardware not included Made in the USA Specs: Dimensions: 10" long x 1-1/2" wide Distance between mounting holes (center to center): 4-3/4" If your boat trailer has crossmembers or support frames that go from side to side, frame rail to frame rail, you can use one or more of these sturdy poly plastic pads to maximize protection of your boat's hull and keel during loading, transport and unloading.
Bump pad mounts to one of your trailer's 3" wide crossmembers to provide a scratch-resistant cushion for your boat's keel. Blue TPR material is stronger than rubber and softer than polyurethane, and it won't leave marks on your boat.Features: Attaches to a crossmember on your boat trailer to provide a scratch-resistant cushion for your boat's keel Helps to prevent damage to your boat during trailering Constructed of thermal-plasticized rubber (TPR) Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Mounts easily to trailer frame Made in USA Specs: Application: 3" wide trailer crossmember Dimensions: 11-3/4" long x 3-1/2" wide YR1203SY Yates Keel Pad - TPR - 11-3/4" Long x 3-1/2" Wide - Blue
Get more traction and stability for your camper's scissor jack by snapping these durable, molded rubber pads onto the base. Fits almost any scissor jack with a bowtie base and installs permanently so you never have to find a spot to store it.Features: Snaps onto the base of your scissor jack for added traction and stability Increases surface area to help prevent sinking into soft ground Grips uneven terrain and prevents metal from rusting or bending Serves as a cushion so metal foot won't crack or chip your driveway Protects footpad from rocks and roots Won't crack, break, or crumble Molded EPDM rubber is more durable than crumb rubber Has built-in drain holes to release moisture, helping to prevent corrosion Installs permanently - no need to remove and store Just pop the shoe on, use a screwdriver to stretch the rubber over the base, and secure with included ties Made in the USA Specs: Application: 2,500-lb to 9,000-lb scissor jacks with bowtie bases Base dimensions: 8-3/4" long x 4-3/8" wide Adapters included to fit 8" long bases External pad dimensions: 11" long x 6-1/2" wide Quantity: 2 pads 2-Year limited warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack the pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when stacked: 12-3/8" Quantity: 2 pads 2-Year warranty
Bump pad mounts to one of your trailer's 3" wide crossmembers to provide a scratch-resistant cushion for your boat's keel. TPR material is stronger than rubber and softer than polyurethane, and it won't leave marks on your boat.Features: Attaches to a crossmember on your boat trailer to provide a scratch-resistant cushion for your boat's keel Helps to prevent damage to your boat during trailering Constructed of thermal-plasticized rubber (TPR) Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Mounts easily to trailer frame Made in USA Specs: Application: 3" wide trailer crossmember Dimensions: 11-3/4" long x 3-1/2" wide 1203 S Y Yates 12" Keel Pad with Side Holes - Yellow Thermal Plastic Rubber
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 5 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 2 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity.Features: Base pads improve the stability of your parked and leveled RV Can be used with 1" or 2" thick base pads (sold separately) on soft surfaces like hot asphalt or sand Constructed of lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked) Individual dimensions: 10" wide on top, 12" wide on bottom, and 7" tall Height when 2 pads are stacked: 12-3/8" Quantity: 6 pads 2-Year warranty
... Stack the pads to get 12-3/8" of height.Features: Base pads work as a jack stand to provide a platform that supports the weight of your scissor or stabilizer jacks Minimize amount of cranking needed to position jack Eliminate the need for blocks of wood or cinderblocks Can be used with 1" or 2" thick jack pads (sold separately) on soft surfaces like hot asphalt or sand Finger holes on side panels make pads easy to carry and retrieve from under your RV Recessed pockets let you easily stack the pads to compensate for uneven terrain Constructed of lightweight, high-strength plastic Made in the USA Specs: Quantity: 4 pads Weight capacity: Individually: 3,500 lbs Stacked: 3,000 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Height when stacked: 14" 2-Year limited warranty
Filters
