Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi Trevor, The Kenda Karrier ST205/75R15 Radial Tire w/ 15" Silver Galvstar Wheel #KE66JR does not come balanced though you can add balancing beads to the tire if you'd like. If you have a single axle trailer you can balance them with two of…
view full answer...The Telesteps Ladder Standoff and Tool Tray #TE89FR is specifically designed to fit on Telesteps ladders like #TE44FR which have the oval vertical uprights. The uprights on the Lippert On-The-Go Telescopic Ladder #LC64HD are round and will not allow…
view full answer...I do not advise you flipping the Torflex axle as that is not how it was designed to be used. Instead what you need is a lift kit for your axle. For single Torflex axle trailers we have 2 different lift kits, part #K71-723-01 for #9 Torflex axles and…
view full answer...The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…
view full answer...Only one set of the Andersen Camper Wheel Chock and Leveler #AM3604 is required to prevent a trailer from moving. Preventing one side of the trailer from moving is all that is needed to prevent the whole thing from moving.
view full answer...The three radial special trailer (ST) tires we offer in size 215/75-14 can be seen on the linked page. These include the Taskmaster #TTWTRTM2157514D in Load range D, the Provider #TTWTR21514 in Load Range C and the Kenda Karrier #AM10229 also in Load…
view full answer...Our trailer wheel and tire combos come from the manufacturer mounted. As trailer tires do not require balancing most manufacturers will not balance their tire packages like the Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod…
view full answer...The instructions for mounting the Hopkins Electronic LED Smart Level #HM08201 are the same for motorhomes and trailers. You can attach the level to your motorhome with the included bracket and adhesive backing. It also has three pre-drilled holes in…
view full answer...The Replacement Control Unit for Kwikee Electric RV Steps #LC379146 which is part 90950600 you referenced is does not have a specific wiring diagram, but I've attached the closest thing and have also included a video of an installation to…
view full answer...Your old Trimark requires a cutout hole measuring 5" wide x 4.85" tall. You could use the Bauer Products Camper Door Lock #BA65FR that you were looking at but would need to trim the cutout hole an extra 1/4" wide to fit. The face plate…
view full answer...The cone that you see in the picture you attached of the Curt Crosswing part #C86JR is there to help align it with the rest of the hitch when you back the vehicle up into it and lower it down with the jacks. This ensures it is completely seated and…
view full answer...You won't have any issues with this setup. The payload capacity of the truck refers to the capacity of the aluminum truck bed where the pin-weight capacity refers to the amount of additional weight the axles and frame can support. With the hitch…
view full answer...Related Searches
Filter Your Search
Contact and Help