This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent damage from electrical feedback. Connects RV and towed car with 4-pole flat plugs. ... To keep the separate lighting system on your car functioning properly while you're flattowing, add a wiring converter (118158 - sold separately) and 2 additional diodes. Do I Need a Brake Light Relay? If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit.
Get a head-start on wiring your towed car before you even get the installation started. This kit comes with butt connectors pre-installed and ready to splice into your wiring. ... Features: Connects your RV's tail, brake, and turn signal lights to your towed car's tail lights Plugs into your motorhome with 4-way flat connector Splices quickly into car's electrical system with included butt connectors Color-coded wires with wiring guide makes installation easier Prevents feedback that can damage your vehicle's electrical components with integrated block diodes Includes 4-wire harness, 4-flat extension cable, mounting bracket, silicone sealant, zip-ties, and installation hardware 1-Year limited warranty Do I Need a Brake Light Relay?
... Nice and secure, these are also the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Mounts securely with heavy-duty magnets Includes 2 lights and wiring harness with 4-way flat trailer connector Heavy-duty vinyl protects wiring from the elements Meets DOT standards Specs: Universal fit for all vehicles Wiring harness length: 20' Wire length between lights: 4-1/2' Separate wire with 4-way for tow vehicle : 3' long Bulb type: 2057 double filament 3-Year limited warranty on housing and wiring only Will These Magnetic Lights Work On My Vehicle?
Stick these bright, efficient LED lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Shines brighter and more efficiently than incandescent bulbs Lasts 50 times longer Attaches with magnets Protective label keeps the magnets from scratching your car Works year-round Lens housing is sonically sealed and waterproof Includes 2 red LED lights and wiring harness with 4-way flat trailer connector Meets DOT standards Specs: Universal fit for all vehicles Light diameter: 4-1/4" Overall dimensions: 3-7/8" long x 5-15/16" tall x 2-3/16" wide Tow light harness length: 245" Wiring length between lights: 63" Length of additional wiring harness for RV: 35" Diodes (per light): 6 Power draw at 12.8 volts Stop/turn signal light: 0.36 amps Tail light: 0.03 amps Lifetime warranty on LEDs Will These Magnetic Lights Work On My Vehicle?
If you want to flattow your vehicle with animated rear lights and have to use a battery bypass, use this kit to connect power and signal from your motorhome or tow rig. ... Features: Kit for animated tail lights is used in conjunction with other parts and systems required for a flattow set-up Allows you to bypass your battery during flattowing Lead can be wired in at the 6-way receiver to the plug from your motorhome or tow rig Can also be run off a lead from a battery charge line kit Quality wire, fittings, and a braided sleeve to protect the wiring and your vehicle Includes: 26' Wiring harness (6) 6-amp diodes Spade connectors, butt connector, ring terminal, and self-tapping screw Specs: Application: vehicles featuring progressive/animated lights that require the battery to be disconnected for flattowing - consult your owner's manual 1-Year warranty
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent damage from electrical feedback. ... To keep the separate lighting system on your car functioning properly while you're flattowing, add a wiring converter (C56196 - sold separately) and 2 additional diodes. Do I Need a Brake Light Relay? If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit.
Plug-and-play custom harness gets turn and brake signals on your towed car with no hardwiring or splicing, and no effect on your warranty. The built-in diodes protect your car from electrical feedback.To keep the separate lighting system on your car functioning properly while you're flattowing, add a wiring converter (118158 - sold separately) and 2 additional diodes. Do I Need a Brake Light Relay? If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit.
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way adapter cable and 6-way car-side socket.To keep the separate lighting system on your car functioning properly while you're flattowing, add a wiring converter (118158 - sold separately) and 2 additional diodes. Do I Need a Brake Light Relay? If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit.
This wiring kit carries brake and turn signals from your motorhome to your towed car while you're flattowing. Diodes protect your car from damage from electrical feedback.To keep the separate lighting system on your car functioning properly while you're flattowing, add a wiring converter (118158 - sold separately) and 2 additional diodes. Do I Need a Brake Light Relay? If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit.
This complete kit includes everything you need to carry your RV's brake and turn signals to your towed car's tail lights. Diodes prevent electrical feedback. ... To keep the separate lighting system on your car functioning properly while you're flattowing, add a wiring converter (118158 - sold separately) and 2 additional diodes. Do I Need a Brake Light Relay? If your towed car's brake lights illuminate when you press the brake pedal with the engine off, you need to install a brake light relay (RM-88400 - sold separately) with this kit.
These bright LEDs stick onto the back of your towed car and display turn and brake signals without tapping into the electrical system - which means no permanent modification to your car! ... Features: LED light strips adhere to the rear of your car and display brake and turn signals No modification to your vehicle No risk of damage from electrical feedback Great for cars that are not compatible with traditional wiring diodes IP68 rating protects LED lights from moisture and dust Color-coded Y wiring harness reaches both sides of the car for easy installation Kit includes everything you need to wire your vehicle's tail lights for flattowing (2) 10" Long LED strips with 3M adhesive 2 Plug-and-play flip latch wiring connectors Wiring harness Zip ties and cable tie mount pads LED output: 152 lumens Made in the USA Limited lifetime warranty
These lights get turn and brake signals on your towed car without splicing into its wiring, eliminating the risk of damage from electrical feedback. They mount inside your vehicle's tail light housing, with the wiring out of sight.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's tail light housing Requires drilling Includes wiring, 2 incandescent lights, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA 1-Year warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
This complete kit includes everything you need to carry your RV's brake and turn signals to your towed car's tail lights. Diodes prevent electrical feedback. ... To keep the separate lighting system on your car functioning properly while you're flattowing, add a wiring converter (118158 - sold separately) and 2 additional diodes. Do I Need a Brake Light Relay? If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit.
Wire your vehicle's tail lights for flattowing with this universal diode kit. Heat-sealed diodes prevent electrical feedback, while the unterminated 4-wire harness lets you add the front connector that works best with your setup.The unterminated harness allows you to select a connector that accommodates your flattowing setup, including additional circuits for a battery charge line or supplemental braking system. This kit wires your towed car as a combined lighting system, meaning that the brake and turn signals travel along the same wire.
These bright little lights get turn and brake signals on your towed car without splicing into its wiring. They fit nicely inside your vehicle's tail light housing, with the wiring out of sight. ... Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Fits easily in tail light housing - requires only a 9/16" hole Requires drilling Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 white LEDs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA Specs: Wiring harness length: 26' Brown and green wire length: 8' 16 Gauge 1-Year warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
Easily plug this custom harness into your towed car to get the turn and brake signals you need for flattowing. Unlike other kits out there, this harness protects your vehicle from electrical feedback without you needing to splice in extra diodes.This kit plugs into factory ports on your vehicle so your car can display the electrical signals coming from your motorhome. That way everyone on the road knows what your rig is up to as you tow.
Plug-and-play custom harness gets turn and brake signals on your towed car with no hardwiring or splicing, and no effect on your warranty. The built-in diodes protect your car from electrical feedback.To keep the separate lighting system on your car functioning properly while you're flattowing, add a wiring converter (118158 - sold separately) and 2 additional diodes. Do I Need a Brake Light Relay? If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit.
Easily plug this custom harness into your towed car to get the turn and brake signals you need for flattowing. Unlike other kits out there, this harness protects your vehicle from electrical feedback without you needing to splice in extra diodes.This kit plugs into factory ports on your vehicle so your car can display the electrical signals coming from your motorhome. That way everyone on the road knows what your rig is up to as you tow.
Plug-and-play custom harness gets turn and brake signals on your towed car with no hardwiring or splicing, and no effect on your warranty. The built-in diodes protect your car from electrical feedback.To keep the separate lighting system on your car functioning properly while you're flattowing, add a wiring converter (118158 - sold separately) and 2 additional diodes. Do I Need a Brake Light Relay? If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit.
These bright little lights get turn and brake signals on your towed car without splicing into its wiring. They install right into the tail light housing, with the wiring out of sight. These ones are so small they'll be easy to find space for.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Fits easily in tail light housing - requires only a 9/16" hole Requires drilling Shines brighter and more efficiently than incandescent bulbs Includes wiring, 2 red LEDs, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA Specs: Wiring harness length: 26' Brown and green wire length: 8' 16 Gauge Light output per bulb: 144 Lumens 1-Year warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
This LED light bar plugs right into your 12V outlet and needs no hardwiring, while the transmitter plugs into your RV's 7-way socket. Uses a suction cup to attach to your car's back window.Features: Displays tail, brake, and turn signals on your towed car so you can tow safely and legally Receives tow vehicle's signals via wireless transmitter Avoids risk of electrical damage to your car Requires no hardwiring or splicing Light bar plugs into 12-volt outlet in your car Transmitter plugs into RV's 7-way Mounts to your vehicle's rear window with a strong suction cup Includes light bar, transmitter and receiver kit, and mounting kit Made in the USA Specs: Universal fit for all vehicles Requires 12-volt accessory outlet Cord length: 11-1/2' Light bar length: 17" Note: If you have to disconnect your vehicle's battery in order to flattow, use kit DM83FR (sold separately) to get power to your 12-volt outlet.
Extension wiring loop with 2 trailer ends lets you connect your RV and towed vehicle. Each male end easily plugs into a 4-way flat, vehicle-end plug.Features: Wiring loop lets you connect your RV to your towed vehicle Dual trailer (male) ends plug into 4-way flat vehicle ends 6' Long
Stick these magnetic lights on the back of your car and plug them in - done. This is the easiest way to get brake and turn signals on your towed car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to your car Makes your tow setup safe and legal without a permanent installation Mounts securely with heavy-duty magnets Includes 2 lights and wiring harness with 4-way flat trailer connector Heavy-duty vinyl protects wiring from the elements Meets DOT standards Specs: Universal fit for all vehicles Length of wire: Wire that connects the lights: 53-1/2" Wire that extends out the back of the light: 243" Wire with 4-pole connector: 35-1/2" Limited lifetime warranty Will These Magnetic Lights Work On My Vehicle?
... This is the easiest way to get brake and turn signals on your car, trailer, or cargo carrier without doing any hardwiring. Requires 4-pole flat plug.Features: Gets turn and brake signals on your towed car without having to tap into its wiring Eliminates risk of electrical damage to towed car Makes your tow setup safe and legal without a permanent installation Shines brighter and more efficiently than incandescent bulbs Attaches with magnets Includes 2 red LED lights and wiring harness with 4-way flat trailer connector Specs: Light diameter: 4" Wiring harness length: 20' Operating range: 8V - 16V Limited lifetime warranty Will These Magnetic Lights Work On My Vehicle?
Filters
