Cree LEDs offer 2,500 lumens of cool white light and a 50,000-hour lifespan. Technologically advanced copper cloth heat sink and smaller components for installation in tight spaces. High-temperature nylon tower. Anti-flicker wiring sold separately.Features: Premium LED lighting kit lets you upgrade from factory halogen headlight bulbs Light is emitted 360 degrees around the bulb High-power Cree XM-L2 LEDs provide brighter, longer-lasting light than standard halogen bulbs Lifespan is greater than 50,000 hours Increased brightness boosts visibility 40-Percent smaller than other bulbs so they fit easily in tight spaces Copper cloth heat sink instead of a large, noisy fan Durable, heat-resistant construction Heat sink effectively dissipates heat High-temperature nylon material Constant-current CPU keeps the bulbs operating at the correct voltage EMC -compliant wiring components IP64 rated for protection from shock, water, and dust Cool white color promotes driver awareness Custom connectors plug into your vehicle's factory headlamp housings No cutting, splicing, or tapping required Off-road use only - bulbs do not meet Department of Transportation specifications May require anti-flicker harnesses (sold separately) to prevent flickering bulbs or a delay when switching between low beams and high beams Specs: Quantity: 2 bulbsBulb type: H3 Brightness: 2,500 lumens per bulb Voltage: 12V DC Color temperature: 6,500 K 1-Year warranty Cool-colored light, especially that with a high color temperature, promotes driver alertness, as opposed to warm-colored light, which promotes relaxation.
... Wiper sticks in place with 3M backing for an easy DIY install. Integrated bulb seals your RV slide when retracted.Features: RV slide out seal stops water and pests from getting into your living area Commonly found on current Forest River 5th wheels and 2013 Itasca Meridian motorhomes Bulb seals against the RV to keep out the elements when the slide-out is closed Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame surrounding the slide-out Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 3-3/16" wide x 15/16" tall Made in the USA
... Wiper sticks in place with 3M backing for an easy DIY install. Integrated bulb seals your RV slide when retracted.Features: RV slide out seal stops water and pests from getting into your living area Commonly found on current Forest River 5th wheels and 2013 Itasca Meridian motorhomes Bulb seals against the RV to keep out the elements when the slide-out is closed Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame surrounding the slide-out Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 60' long x 3-3/16" wide x 15/16" tall Made in the USA
... Seal presses into existing 3/16" flange for an easy DIY installation. Integrated bulb seals your RV slide when retracted.Features: RV slide out seal stops water and pests from getting into your living area Bulb seals against the RV to keep out the elements when the slide-out is closed Flexible metal core helps wiper keep a good grip Easy installation - push onto existing railing for weather stripping Fits 3/16" pinch-weld thick flange Tucking tool recommended to ease installation (sold separately) Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 40' long x 15/16" wide x 2-7/8" tall Made in the USA
Replace your old and worn out C-channel mounted weather stripping before water damage creates a costly headache. Bulb seal slides onto existing track on the RV frame or can be used with Steele Rubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Commonly found on Forest River campers and other RVs Works with stick-on wiper seal with track (SR27FR, SR67FR, and SR99FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 1" wide x 7/8" tall Made in the USA
Get increased visibility and range from your high beams with these powerful H1 single-beam LED headlight bulbs. Xtreme series bulbs feature automotive-grade LED chips that are 5 times brighter than halogen bulbs. Plug-and-play installation.Stable lumens builds off the idea of effective lumens by measuring the amount of light produced after 30 minutes of usage, or once the diodes have reached their average operating temperature. These bulbs have a 5,000 raw lumen capacity per bulb and produce 4,565 effective lumens per bulb. The stable lumen capacity per bulb is 4,033 lumens.
... Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.Features: Dual-face incandescent trailer light installs on your trailer fender Amber light faces the front of trailer Red light faces the rear of trailer Built-in reflex reflector removes the need for a separate reflector Incandescent bulbs can be easily replaced Druable polycarbonate housing and lens Red and amber lens over incandescent bulbs Compatible with 12V DC systems Surface mount with included mounting bracket Pre-wired design includes female barrel and grounding eyelet DOT complaint P2 rated Specs: Configuration: passenger side Driver side: BA44FNL - sold separately Dimensions: 8-1/2" long x 3-1/4" wide Distance between mounting holes (center on center): 1-1/2" Bulb type: 194 Number of bulbs: 2 Power draw at 12.8V: 0.4 amps 3-Year warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Replace your old and worn out C-channel mounted weather stripping before water damage creates a costly headache. Bulb seal slides onto existing track on the RV frame or can be used with Steele Rubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Ideal for 2010 Big Horn by Heartland 5th wheel and other RVs Works with stick-on wiper seal with track (SR27FR, SR67FR, and SR99FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 1-3/16" wide x 1-3/16" tall Made in the USA
Replace your old and worn out weather stripping before water damage creates a costly headache. Slides onto existing 3/16" track commonly found on the outer wall of the slide out.Features: Rubber seal replaces worn out weather stripping around slide outs Typically found on the inside edge of the slide-out outer wall Ideal for Thor Citation RVs Commonly paired with bulbless wiper seals (SR29FR or SR96FR - sold separately) Bulb design compresses evenly to prevent side-flop and for greater surface contact Easy installation - slide into onto existing track and trim any extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 13/16" wide x 1" tall Made in the USA
Protect your enclosed trailer and its contents from damage by replacing worn out weather stripping. This kit includes the tools you need to replace seals around gates for toy haulers and car trailers.Features: Ramp gate seal kit weatherproofs toy and vehicle hauler gates 35' Ribbed hollow bulb seal keeps the elements out of your trailer when door is closed Ramp gate corner seal installs near door hinge for added protection Comes in one single piece and is trimmed for a custom fit Plastic scraper tool helps you get rid of any old weather stripping and adhesive before install Loctite super bonder 495 glue closes gaps in seal as you make trims for mitered corners Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Seal dimensions: 7/8" wide x 1" tall Made in the USA
Replace your old and worn out C-channel mounted weather stripping before water damage creates a costly headache. Bulb seal slides onto existing track on the RV frame or can be used with Steele Rubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Commonly found on Forest River campers and other RVs Works with stick-on wiper seal with track (SR49FR, SR59FR, and SR77FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 60' long x 1" wide x 7/8" tall Made in the USA
These lights get turn and brake signals on your towed car without splicing into its wiring, eliminating the risk of damage from electrical feedback. They mount inside your vehicle's tail light housing, with the wiring out of sight.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's tail light housing Requires drilling Includes wiring, 2 incandescent lights, 2 sockets, and installation hardware Requires additional harness with 4-flat plug to connect to motorhome - sold separately Made in the USA 1-Year warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
Replace your old and worn out C-channel mounted weather stripping before water damage creates a costly headache. Bulb seal slides onto existing track on the RV frame or can be used with Steele Rubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Protects your RV from weather and pests when slide-out is closed Fins prevent side-flop when compressed and increase contact surface size Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 1" wide x 1-1/8" tall Made in the USA
Replace your old and worn out C-channel mounted weather stripping before water damage creates a costly headache. Bulb seal slides onto existing track on the RV frame or can be used with Steele Rubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Protects your RV from weather and pests when slide-out is closed Fins prevent side-flop when compressed and increase contact surface size Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 60' long x 1" wide x 1-1/8" tall Made in the USA
... Wiper sticks in place with 3M backing for an easy DIY install. Integrated bulb seals your RV slide when retracted.Features: RV slide out seal stops water and pests from getting into your living area Commonly found on current Forest River 5th wheels and 2013 Itasca Meridian motorhomes Bulb seals against the RV to keep out the elements when the slide-out is closed Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame surrounding the slide-out Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 3-3/16" wide x 15/16" tall Made in the USA
... Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.Features: Dual-face incandescent trailer light installs on your trailer fender Amber light faces the front of trailer Red light faces the rear of trailer Built-in reflex reflector removes the need for a separate reflector Incandescent bulbs can be easily replaced Druable polycarbonate housing and lens Red and amber lens over incandescent bulbs Compatible with 12V DC systems Surface mount with included mounting bracket Installation hardware not included Pre-wired design includes female barrel and grounding eyelet DOT complaint P2 rated Specs: Configuration: driver side Passenger side: BA44FNR - sold separately Dimensions: 8-1/2" long x 3-1/4" wide Distance between mounting holes (center on center): 1-1/2" Bulb type: 194 Number of bulbs: 2 Power draw at 12.8V: 0.4 amps 3-Year warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Replace your old and worn out C-channel mounted weather stripping before water damage creates a costly headache. Bulb seal slides onto existing track on the RV frame or can be used with Steele Rubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Protects your RV from weather and pests when slide-out is closed Fins prevent side-flop when compressed and increase contact surface size Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 30' long x 1" wide x 1-1/8" tall Made in the USA
Replace your old and worn out weather stripping protecting the narrow gaps around your slide out before water damage creates a costly headache. This thick rubber is best for RV slide outs with tight tolerances. Easy DIY install with adhesive backing.Features: P-shaped profile wiper and bulb seal stops water and pests from getting into your living area Commonly used with older RVs and motor-coaches that feature slide-out boxes with tight tolerances Bulb seals against the RV to keep out the elements when the slide-out is closed Peel-and-stick installation with pre-applied 3M adhesive backing Remove backing and apply the seal to the RV frame surrounding the slide-out Surface preparation recommended to remove any old adhesive Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage White color Dimensions: 30' long x 2" wide x 1" tall Made in the USA
Replace your old and worn out C-channel mounted weather stripping before water damage creates a costly headache. Bulb seal slides onto existing track on the RV frame or can be used with Steele Rubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Commonly found on Forest River campers and other RVs Works with stick-on wiper seal with track (SR39FR, SR87FR, and SR47FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 1-1/8" wide x 7/8" tall Channel width: 1" Made in the USA
Replace your old and worn out C-channel mounted weather stripping before water damage creates a costly headache. Bulb seal slides onto existing track on the RV frame or can be used with Steele Rubber wiper seals with integrated track.Features: Rubber bulb seal replaces worn out weather stripping around slide outs Ideal for 2010 Big Horn by Heartland 5th wheel and other RVs Works with stick-on wiper seal with track (SR39FR, SR87FR, and SR47FR - sold separately) Easy installation - slide onto existing track located on the RV frame surrounding the slide-out Use scissors to trim extra seal EPDM dense rubber construction won't shrink, crack, or fade over time Resistant to UV damage Dimensions: 15' long x 1-3/16" wide x 1-3/16" tall Made in the USA
Replace worn out weather stripping on your RV slide-out or toy hauler ramp gate with this D-shaped rubber seal. Seal sticks in place with adhesive backing for an easy DIY install.
Replace your old and worn out weather stripping around your compartment doors before water damage creates a costly headache. This bulb seal installs onto 3/16" - 1/4" thick flanges. Flexible core keeps seal in place on rounded corners.
These lights get turn and brake signals on your towed car without splicing into its wiring, eliminating the risk of damage from electrical feedback. They mount inside your vehicle's tail light housing, with the wiring out of sight.Features: Displays your RV's tail, turn, and brake signals on your towed car without tapping into its wiring No risk of damage from electrical feedback No effect on your warranty Mounts inside car's tail light housing Requires a 1" diameter hole drilled into the tail light housing Includes 2 wiring harnesses, 2 incandescent lights, 2 sockets, and installation hardware Made in the USA Specs: Overall measurement of bulb: 2-1/4" Length of bulb from flange to top of bulb: 2" Length past mounting surface: 1-7/8" 4-Way flat harness: 30' long RV harness: 6' long Hole required for sockets: 1" diameter Limited lifetime warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
High-power CSP LEDs provide 5,000 lumens of bright white light to upgrade your factory halogen headlight bulbs. Miniature capacitors remove need for external anti-flicker module. Precision terminal system ensures fit with existing OEM harness.Features Premium LED lighting kit lets you upgrade your factory halogen headlight bulbs Light is emitted 360 degrees around the bulb High-power CSP LEDs provide brighter, longer-lasting light than standard halogen bulbs Lifespan is greater than 50,000 hours Increased brightness boosts visibility Tower with non-reflective nickel finish eliminates light interference inside the lamp Easy-Clock collar allows you to quickly and easily adjust the angle of the beam Low-profile 20-mm heat sink for easy installation into tight space Solid state design effectively dissipates heat and prolongs light life Anti-flicker driver box with miniature capacitors removes need for external anti-flicker module Nylon braided sleeve is abrasion and heat resistant Precision terminal system ensures fit with existing OEM harness Features both twist lock and slide pressure locks 100-Percent water and dust proof Specs: Quantity: 2 bulbsBulb type: H13 Color temperature: 6,500 K Light output: 5,000 lumens Wattage: 24 watts Operating voltage: 12V - 24V DC 1-Year limited warranty
Filters
