Grease caps with 1.99" OD seal out dirt while letting you add grease through your EZ Lube spindle. Rubber plug keeps grease in and water out. Designed for Dexter 7" and 10" x ... Features: EZ Lube grease caps seal your hub and let you easily add grease through your EZ Lube axle spindle Rubber plug keeps grease in and helps block dirt, water, and debris Drive-in installation
These 2.72" OD EZ Lube grease caps seal your Dexter hub and let you add grease through the spindle. Zinc-plated steel resists rust. Designed for 12" x 2" Dexter hubs with 8-bolt ... Features: Grease caps let you add grease through EZ Lube spindles while sealing out water and debris Includes removable rubber plugs for access to zerk fittings Corrosion-resistant zinc plating and
Cap assemblies replace the grease caps on your Dexter or Tie Down Vortex trailer hubs. Includes 2 threaded caps that fit 2,500-lb to 4,200-lb hubs.Features: Replaces the grease caps on your Tie Down (or Dexter) Vortex trailer hubs Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Quantity: 2 caps
Haul with confidence using DeeMaxx 13" hub-rotor assemblies with MAXX coating and threaded oil caps. Designed for 8K oil bath axles with 5/8" studs. Includes races. Works with most disc ... screw-on oil caps for secure oil bath setups Drainage holes included: Moves water out to protect and extend component life Oil bath with 5/8" studs: Ideal for 8K marine, ag, or winter-use trailer axles
Protect your trailer's bearings from dirt and moisture with these 1.99" outer diameter grease caps. Zinc-plated steel resists rust, and the drive-in design fits 7" and 10" Dexter ... Features: Protective grease caps keep dirt, water, and debris out of your trailer's wheel bearings Durable, 22-gauge zinc-plated steel resists corrosion and holds up to harsh road conditions
Protect your trailer's bearings with these 2.446" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in fit installs easily. Designed for 12" x 2" Dexter hubs with ... cap securely into your hub bore Made in the USA Specs: Quantity: 2 Flange diameter (outer diameter): 2.446" Crown height: 1.03" Flange length: 0.313" Overall height: 1.34"
Caps
Standard Grease Cap
5200 lbs Axle
6000 lbs Axle
2.44 Inch O.D.
Dexter
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to ... Highlights Complete Waterproof Protection: Keeps water and grit out, so your bearings and hub stay protected. Direct-Fit Replacement: Replaces factory oil bath/grease caps, O-ring, and plug for
From open highways to tough job sites, this aluminum cap delivers waterproof protection you can trust. One look through the clear lens shows your oil or grease level so you know you're ready to ... Highlights Complete Waterproof Protection: Keeps water and grit out, so your bearings and hub stay protected. Direct-Fit Replacement: Replaces factory oil bath/grease caps, O-ring, and plug for
Kit Includes: One Inner Bearing and Race One Outer Bearing and Race Grease Seal Cotter Pin Grease Cap Outer Bearing Race Inner Bearing Race Seal Seal I.D. Outer Hub I.D. L44643 L44610 L44643 L44610
Replace the oil cap, O-ring, and plug for your Dexter or Valcrum axle. Red retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or drain oil. Aluminum ... Features: Replaces the oil cap, O-ring, and plug for these Dexter and Valcrum caps Dexter: K71-148-00, 021-036-00, or 021-256-00 Valcrum: ST-400D-AM Red retainer ring shields clear viewing lens
Replace the oil/grease cap, O-ring, and plug on your 10K-16K Lippert axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal flecks. Side port lets you add or drain ... Features: Replaces the oil bath/grease cap, O-ring, and plug on these axles: Lippert 10K to 16K axles Direct replacement for these Lippert, Dexter, or Valcrum oil caps: Lippert: 693935 Dexter: 21-36
Center cap fits your steel trailer wheel with a 4.25" - 4.27" diameter pilot hole. Stainless steel construction is corrosion resistant. Removable snap-in plug provides easy access to your ... Features: Center cap for steel wheels (sold separately) covers the hub on your trailer Place center wheel cap thru the rear of the pilot hole on your steel wheel before installing the tire and wheel
Replace the oil cap, O-ring, and plug for your Dexter, Rockwell, or Lippert axle. Red retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or drain oil ... Features: Replaces the oil cap, O-ring, and plug for these Dexter, Rockwell and Lippert caps Dexter: K71-038-00, 021-035-00, or K21-297-00 Rockwell: 8001 Lippert: 695814 Red retainer ring shields
Replace the oil cap, O-ring, and plug for your Dexter, Rockwell, Valcrum, or AL-KO axle. Red retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or ... Features: Replaces the oil cap, O-ring, and plug for these Dexter, Rockwell, Valcrum, and AL-KO caps Dexter: K71-859-00, 021-219-00, 021-229-00, or K21-226-00 Rockwell: 12001 Valcrum: ST-375-AM AL-KO
Enhance your trailer's appearance with this chrome-plated steel center cap. Designed for 15" and 16" 6-lug wheels with a 3.75" diameter pilot hole. Removable snap-in plug provides ... Features: Open-end design allows easy access to grease fittings without removing the cap Chrome-plated steel construction provides durability and corrosion resistance Includes a chrome button for a
Cap assembly replaces the grease cap on your Dexter or Tie Down Vortex trailer hubs. Includes 1 threaded cap that fits 2,500-lb to 4,200-lb hubs.Features: Replaces a grease cap on your Tie Down (or Dexter) Vortex trailer hubs Fits 2,500-lb - 4,200-lb idler hubs and hub/rotors Black with yellow lettering Quantity: 1 cap
Lost a grease cap on the road? It happens. Or maybe you just want to upgrade your caps. This kit gives you 2 chrome grease caps and plugs to keep your hubs sealed and your bearings happy. And the ... Highlights Protects your hubs from grime: Includes 2 chrome grease caps for a tight seal. 2.45" Outer Diameter: Ensures a snug, secure fit to keep grease in and contaminants out. Pop-Out Rubber
Clear polycarbonate cap screws into your 10,000-lb to 16,000-lb oil bath hubs. Allows for better retention and visual inspection of oil levels. Includes O-ring and plug for complete seal.Features: Clear polycarbonate cap screws into your 10,000-lb to 16,000-lb oil bath hubs Allows for better retention and visual inspection of oil levels Includes O-ring and plug for complete seal
Replace the oil cap, gasket, and plug for your industrial-grade Dexter axle. Red retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or drain oil ... Features: Replaces the bolt-on oil cap, gasket, and plug for your Dexter axle Fits industrial-grade Dexter axles Red retainer ring shields clear viewing lens against damage Large side plug is easy to
Replace the oil cap, O-ring, and plug for your Dexter axle. Red retainer ring shields clear viewing lens against damage. Large side plug is easy to access to fill or drain oil. Aluminum body with ... Features: Replaces the oil cap, O-ring, and plug for these Dexter caps Dexter: K71-704-99, 021-088-00, or K21-257-00 Red retainer ring shields clear viewing lens against damage Large side plug is
Replaces 1 grease cap with O-ring and plug for your 7,000-lb, 7,200-lb, or 8,000-lb Kodiak hub-and-rotor disc brake kit.Features: Fits 7,000-lb, 7,200-lb, and 8,000-lb Kodiak hub-and-rotor disc brake kits Fits 2.25" spindle only Clear polycarbonate cap functions as either a grease cap or oil cap Watertight O-ring
Replaces the oil cap, O-ring, and plug for your AL-KO or Rockwell axle. Fits 10,000-lb - 16,000 lb heavy-duty axles.Features: Replaces the oil cap, O-ring, and plug for your AL-KO or Rockwell axle Fits 10,000-lb - 16,000 lb heavy-duty axles Made in the USA Note: Direct replacement for Alko oil cap kit K568220
Replace the oil/grease cap, O-ring, and plug on your 9K-15K axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal flecks. Easy access side port lets you add or drain ... Valcrum oil caps: Dexter: 21-36, 21-036, or K71-148-00 Valcrum: ST-400 manufactured after 08/2019 Cap functions as either an oil bath or grease cap Magnetic vent plug attracts damaging metal particles Helps
Filters
