7/16" Diameter mounting nut is used to secure a bolt for mounting 7" or 10" trailer brake assemblies.Features: Locknut secures a bolt for mounting a 7" or 10" trailer brake assembly Zinc plating is corrosion resistant Specs: Diameter: 7/16" Threads per inch: 20 Quantity: 1 mounting nut
Replaces the stainless steel nut for your 8K DeeMaxx disc brake bracket. 1/2"-20Features: Replaces the stainless steel nut for your 8K DeeMaxx disc brake bracket Thread: 1/2"-20 with nylon-insert Stainless steel is corrosion resistant Fits: All 8K DeeMaxx disc brake brackets
Replace a damaged hydraulic trailer brake line with this 18" Kodiak male brake line. The swivel male end and brass flare nut help simplify installation in tight spaces while maintaining a secure connection.Secure Connection: Brass flare nut helps create a tight, reliable fit at the brake line connection point. Sized For Standard Brake Systems: 3/16" line works with many common hydraulic trailer brake applications.
Replaces the stainless steel nut for your 6K or 7K DeeMaxx disc brake bracket. 3/8"-16Features: Replaces the stainless steel nut for your 6K or 7K DeeMaxx disc brake bracket Thread: 3/8"-16 with nylon insert Stainless steel is corrosion resistant Fits: All 6K DeeMaxx disc brake brackets All 7K DeeMaxx disc brake brackets
Replaces 1 of the 5/8"-18 outer roller hex nuts for your Dexter Model 20 brake actuator.Features: Replaces a 5/8"-18 outer roller hex nut for your Dexter Model 20 brake actuator Quantity: 1 hex nut 3 Required for complete install
3/8" Diameter replacement nut is designed for use with the U-bolts that help secure your trailer's axle to its leaf springs. It also fits the 3/8" mounting bolts for your 12" brake assembly.Features: Secures in place on a 3/8" diameter U-bolt for your trailer suspension system Fits the mounting bolts for 12" brake assemblies Zinc plating is corrosion resistant Specs: Diameter: 3/8" Threads per inch: 24 Quantity: 1 replacement nut
If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 12" x 2" Assemblies fit 14.5" to 16" wheels. Made in the USA.Features: Parking-brake-ready brakes let you park your trailer more safely Perfect for pop-up campers, overlanding, and agricultural applications Requires tongue-mounted activating lever and cables (not included) Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Adjuster plugs (included) protect internal components from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Includes mounting nuts (bolts sold separately) Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12" diameter x 2" wide Mounting flange bolt pattern: 5 bolt Wheel size: 14-1/2", 15" or 16" Axle rating: 6,000 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
Free-backing, driver's-side and passenger's-side hydraulic trailer brake assemblies won't engage when you reverse, even if your actuator is activated. Parking brake ready. Fits 14-1/2" and larger wheels.Features: Free backing brakes let you back up without locking up Required if your surge actuator doesn't have a reverse lockout Parking-brake-ready brakes let you park your boat trailer more securely Requires tongue-mounted activating lever and cables (T2385200 - sold separately) Periodic manual adjustment required Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for consistent braking compared to riveted pads Adjuster plugs (included) keep internal components free from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies and mounting nuts included Mounting bolts (BRKH12) sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12" diameter x 2" wide Wheel size: 14-1/2" and larger Mounting flange bolt pattern: 5 bolt Axle rating: up to 7,000 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.Features: Parking-brake-ready brakes let you park your trailer more safely Perfect for pop-up campers, overlanding, and agricultural applications Requires tongue-mounted activating lever and cables (not included) Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Adjuster plugs (included) protect internal components from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Includes mounting nuts and bolts Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 10" diameter x 2-1/4" wide Mounting flange bolt pattern: 4 bolt Wheel size: 14", 14-1/2", and 15" Axle rating: 3,500 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
Dacromet backing plates and e-coated shoes fight rust and corrosion. Ideal for boat trailers near saltwater. Parking-brake-ready, free-backing brakes won't activate when you back up. Fits 14-1/2" and larger wheels.Features: Marine-grade brakes are great for boat and snowmobile trailers Dacromet-coated backing plates offer excellent rust resistance Stainless steel springs are rustproof E-coated shoes resist corrosion Free-backing design lets you back up without the brakes engaging Required if your surge actuator doesn't have a reverse lockout Parking-brake-ready so you can park your boat trailer more securely Requires tongue-mounted activating lever and cables (T2385200 - sold separately) Periodic manual adjustment required Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for consistent braking compared to riveted pads Adjuster plugs (included) keep internal components free from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies and mounting nuts included Mounting bolts (BRKH12) sold separately Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12" diameter x 2" wide Wheel size: 14-1/2" and larger Mounting flange bolt pattern: 5 bolt Axle rating: up to 7,000 lbs Limited 5-year warranty Reverse Easily with Free-Backing Brakes Backing up your trailer might be the only time you don't want the brakes to work.
If your trailer sees off-road action, adding hand brakes (sold separately) offers more peace of mind when parking on sloped surfaces. 12" x 2" Assemblies fit most 14-1/2", 15", and 16" wheels. ... Features: Hydraulic drum brake assemblies are designed for use with a surge-type trailer brake actuator Parking-brake-ready so you can park your trailer more securely Perfect for pop-up campers, overlanding, and agricultural applications Requires tongue-mounted activating lever and cables (T2385200 - sold separately) Periodic manual adjustment required Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for consistent braking compared to riveted pads Adjuster plugs (included) keep internal components free from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies and mounting nuts included Mounting bolts (BRKH12) sold separately Made in the USA Specs: Dimensions: 12" diameter x 2" wide Pad lining: 46 sq in Wheel size: 14-1/2", 15" or 16" Mounting flange bolt pattern: 5 bolt Center hole diameter: 3-1/4" Axle rating: up to 7,000 lbs Limited 5-year warranty Ready to Roll When You Are If you're looking to customize your off-road trailer, opting to attach a parking brake cable to these brakes will make sure you get a little extra security when parking your trailer on steep inclines.
If your trailer sees off-road action, use a handbrake (not included) with these brakes to hold it steady when parking on uneven terrain. 7" x 1-1/4" Assemblies fit 10" to 13" wheels. Made in the USA.Features: Parking-brake-ready brakes let you park your trailer more safely Perfect for pop-up campers, overlanding, and agricultural applications Requires tongue-mounted activating lever and cables (not included) Easier to install and gives you more control than hydraulic brakes Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed Periodic manual adjustment required Can be done in minutes Long-lasting brake pads offer excellent braking torque Fully bonded to shoes for more consistent braking compared to riveted pads Adjuster plugs (included) protect internal components from dirt, grime, and road debris Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Includes mounting nuts and bolts Made in the USA Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 7" diameter x 1-1/4" wide Mounting flange bolt pattern: 4 x 4" Wheel size: 10", 12", and 13" Axle rating: 2,200 lbs Limited 5-year warranty Quick Tip: There's really not a whole lot to getting new drum brakes.
9/16" Diameter shackle bolt is used to mount slipper spring inside hanger. Fluted shank keeps the bolt from turning in the bracket and wearing the bracket out. Sold in pairs. Includes locknuts.
This 5-3/8" long x 2-3/8" wide U-bolt works with a U-bolt plate and another U-bolt to help secure your 3,500-lb round trailer axle to its leaf springs. Galvanized steel is durable and corrosion resistant.Features: Replacement U-bolt acts as part of a trailer suspension system Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame Round bolt fits round trailer axles Galvanized steel resists rust and corrosion Great for use on boat or snowmobile trailers Nuts and washers included Made in the USA Specs: Quantity: 1 U-bolt Application: 2-3/8" diameter axles Inner width: 2-3/8" Length: 5-3/8" Bolt size: 1/2"-13 Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This 6-11/16" long x 3-1/16" wide U-bolt works with a U-bolt plate and another U-bolt to help secure your 5,200-lb, 6,000-lb, or 7,000-lb round trailer axle to its leaf springs. Galvanized steel is durable and corrosion resistant.Features: Replacement U-bolt acts as part of a trailer suspension system Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame Round bolt fits round trailer axles Galvanized steel resists rust and corrosion Great for use on boat or snowmobile trailers Nuts and washers included Made in the USA Specs: Quantity: 1 U-bolt Application: 3" diameter axles Inner width: 3-1/16" Length: 6-11/16" Bolt size: 1/2"-13 Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This 4-13/16" long x 1-3/4" wide U-bolt works with a U-bolt plate and another U-bolt to help secure your 2,000-lb round trailer axle to its leaf springs. Galvanized steel is durable and corrosion resistant.Features: Replacement U-bolt acts as part of a trailer suspension system Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame Round bolt fits round trailer axles Galvanized steel resists rust and corrosion Great for use on boat or snowmobile trailers Nuts and washers included Made in the USA Specs: Quantity: 1 U-bolt Application: 1-3/4" diameter axles Inner width: 1-3/4" Length: 4-13/16" Bolt size: 3/8"-16 Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your round, 8,000-lb axle to your leaf springs. Bolt is 8" long and has an inner width of 3-1/2".Features: Used with U-bolt plate to secure axle to leaf springs, which are mounted to the trailer frame Attaches with a U-bolt plate (sold separately) and an additional U-bolt with same dimensions (sold separately) Fits 8,000-lb, round trailer axles with 3-1/2" diameter Includes 2 nuts Specs: Bolt diameter: 9/16" Length: 8" Width: 3-1/2"
This 7" long U-bolt works with a U-bolt plate and another U-bolt to help secure your 5,200-lb, 6,000-lb, or 7,000-lb round trailer axle to its leaf springs. Bolt is 7" long and has an inner width of 3". 2 Nuts included.Features: Replacement U-bolt acts as part of a trailer suspension system Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame Round bolt fits round trailer axles 1 U-bolt and 2 nuts included Specs: Application: 3" diameter axles Inner width: 3" Length: 7" Bolt size: 1/2"-20
This 5-1/2" long U-bolt works with a U-bolt plate and another U-bolt to help secure your 3,500-lb round trailer axle to its leaf springs. Bolt has an inner width of 2-3/8". 2 Nuts included.Features: Replacement U-bolt acts as part of a trailer suspension system Used with another U-bolt (sold separately) and a U-bolt plate to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame Round bolt fits round trailer axles 1 U-bolt and 2 nuts included Specs: Application: 2-3/8" diameter axles Inner width: 2-3/8" Length: 5-1/2" Bolt size: 1/2"-20
This U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your round, 10,000-lb Hayes axle to your leaf springs. Bolt is 9-1/2" long and has an inner width of 5".Features: Used with U-bolt plate to secure axle to leaf springs, which are mounted to the trailer frame Attaches with a U-bolt plate (sold separately) and an additional U-bolt with same dimensions (sold separately) Fits 10,000-lb, round Hayes trailer axles with 5" diameter Includes 2 nuts Specs: Bolt diameter: 5/8" Length: 9-1/2" Width: 5"
5" Long U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your square, 1-3/4" wide axle to your leaf springs.Features: Used with U-bolt plate to secure axle to leaf springs, which are mounted to the trailer frame Attaches with a U-bolt plate (sold separately) and an additional U-bolt with same dimensions (sold separately) Each side of U-bolt is threaded from 2-1/8" to end Fits square, 1-3/4" wide trailer axles Includes 2 nuts Specs: Bolt diameter: 9/16" Length: 5" Width: 1-3/4"
This U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your 5,200-lb, 6,000-lb or 7,000-lb, round axle to your leaf springs. Bolt is 7-1/4" long and has an inner width of 3".Features: Used with U-bolt plate to secure axle to leaf springs, which are mounted to the trailer frame Attaches with a U-bolt plate (sold separately) and an additional U-bolt with same dimensions (sold separately) Fits 5,200-lb, 6,000-lb and 7,000-lb, round trailer axles with 3" diameter Includes 2 nuts Specs: Bolt diameter: 9/16" Length: 7-1/4" Width: 3"
Filters
