Heavier pontoons need more contact to ride steady. This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.This bracket is cut from 11-gauge steel and hot-dip galvanized, so it holds its shape and can live outside in the weather without turning rusty.
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
... A swivel bolster adds a little pivot so the bunk sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Non-Slip Stability: Dimples help lock the bunk in place, boost load capacity and keep your boat steady when loading. Features to know about Adjustable Boat Trailer Bunk Bracket for Centered, Scuff-Free Loading When a boat loads crooked or rubs the same spot every trip, it's usually a bunk alignment issue, not the hull.
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-1/2" wide x 3" long x 1-3/4" tall Hole diameter: 3/8"
This one-piece panel bracket braces a 12" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports a 12" roller on your boat trailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 12" rollers Accepts a 13" long x 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 10" apart on center Typically installed upright on the crossmembers of a boat trailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-1/2" wide x 4" long x 1-3/4" tall Hole diameter: 1/2"
Create a fixed-position tie-down point on your boat trailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 30-degree mounting angle. Made of corrosion-resistant galvanized steel.Features: Creates a fixed-position tie-down on your trailer Bolts to trailer's frame, wall or floor Mounting hardware not included 30-Degree mounting angle accommodates most tie-down applications Constructed of galvanized steel - long-lasting and corrosion resistant Made in the USA Specs: Quantity: 1 bracket Length: 4" Width: 1-15/16" Small bolt hole diameter: 1/2" Large bolt hole diameter: 7/8" The 30-degree mounting angle of this bracket makes it simple to attach a rope or to hook up straps by spacing the anchor away from the wall or floor, proving easy access to the tie-down hole.
These split roller brackets brace any size roller on your boat trailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Right- and left-hand brackets support a roller on your boat trailer Fit any length roller that has 5/8" diameter shaft Sturdy, 11-gauge, galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 pair Application: 4", 5", 8", 10", 12" and 18" long rollers Requires 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall These split panel brackets mount upright to a trailer's crossmember.
... A swivel bolster lets you pivot your bunk so it sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Swivel bolster brackets let you adjust your bunk boards to where they should be, so the hull sits right and loading feels smooth. The 2-3/4" vertical slot gives you the wiggle room to dial in bunk height for your boat, and the non-slip dimples bite into the board to prevent movement and boost load capacity.
Galvanized steel swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that your boat's hull fits snugly during transport. ... Features: Heavy-duty swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 11-Gauge, galvanized steel construction is sturdy and resists corrosion Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-3/8" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: 2-1/2" apart on center Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-7/8" wide x 4" long x 2-5/16" tall Hole diameter: 1/2"
This lightweight and corrosion-resistant aluminum swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that the boat's hull fits snugly during transport.Features: Swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 3 Bolt holes allow for a strong connection to the bunk board Aluminum construction is sturdy and offers superior corrosion resistance Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-1/2" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: Outer holes (center to center): 2-1/2" Inner holes (center to center): 1-1/4"
... This swivel top angle replaces the pivoting head on your bolster bracket, letting your bunk sit flush to the hull. Pair it with an upright bracket to complete your setup.It's a simple piece of hardware that makes loading feel steadier. Specs Application Swivel bunk bracket for boat trailer bunk boards Dimensions and Weight Overall dimensions: 3-1/2" long x 1-7/8" wide x 1-1/2" tall Weight: 0.26 lbs Material Material: galvanized steel Color: silver General Warranty: 1-year limited Made in the USA
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.Features: L-shape brackets accommodate a variety of different roller lengths Mount to your boat trailer's frame or tongue Sturdy, 7-gauge galvanized steel construction resists corrosion Made in the USA Specs: Application: 4", 5", 8", 10", 12" and 18" long rollers that take a 1/2" diameter shaft Diameter of mounting holes (each): 3/8" Quantity: 1 pair Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
This one-piece panel bracket braces an 8" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports an 8" roller on your boat trailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 8" rollers Accepts an 8-7/8" long x 5/8" diameter roller shaft Overall dimensions: 8-1/8" long x 7-3/4" wide x 3-1/2" tall Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 6" apart on center Typically installed upright on the crossmembers of a boat trailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
This bolster bracket supports your boat trailer's bunk. Constructed of corrosion-resistant galvanized steel, it helps you to properly align your bunk boards and provides years of reliable use.Features: Bolster bracket mounts to your pontoon boat trailer's frame or crossmembers and allows you to mount 2 bunk boards Stabilizes bunk boards when 2 brackets are used (other bracket sold separately) Does not include mounting hardware 3/8" Thick, galvanized steel construction is sturdy and resists corrosion Made in USA Specs: Quantity: 1 bracket Base length: 2-1/2" Arm length (each): 8-1/8" Diameter of mounting holes (each): 7/16" This bracket holds two bunk boards angled toward each other to provide support for one of the boat's pontoons.
Create a sturdy tie-down spot wherever you need it on your boat trailer. This aluminum bracket bolts to your trailer's frame, wall, or floor so you can secure your coolers or gear to prevent shifting during travel.
V-wing bolster bracket supports the bunks on your pontoon boat trailer. Short bracket wings and deep cradle are great for narrow pontoons. Galvanized steel material is ideal for saltwater use.Features: Heavy-duty bracket allows you to mount 2 bunk boards on your pontoon boat trailer Mounts on your boat trailer's frame or crossmember Stabilizes bunk boards when at least 2 brackets are used (other bracket sold separately) Short bracket wings surround and stabilize narrow pontoons Deep cradle keeps your boat's pontoons from jostling side-to-side Slotted mounting hole allows for easy adjustment along frame during installation 11-Gauge, galvanized steel construction is sturdy and corrosion resistant Mounting hardware sold separately Made in the USA Specs: Quantity: 1 bracket Application: 4" wide bunk boards Maximum length: 11-3/4" Base length: 8-1/2" Maximum height: 5-1/8" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
If your bunk brackets are rusted, bent, cracked, or no longer keeping your bunks aligned and tight, it's time for new ones. This will make sure your boat sits square, loads smoothly, and you're not risking hull damage or a failed support.Highlights Get Your Boat Hull to Sit Right: The 2-3/4" vertical slot lets you dial in bunk height so the boat centers on your trailer. Stop the Squeaks: Non-slip dimples and a 12" base spread the load and stop bunk creep, so boards don't dig in or squeak.
This bolster bracket supports your pontoon boat trailer's bunks. Constructed of corrosion-resistant galvanized steel with a sturdy base, it helps you to properly align your 6" or 8" wide bunk boards on your trailer.Features: Heavy-duty bracket mounts to your pontoon boat trailer's frame or crossmembers and allows you to mount 2 bunk boards Stabilizes bunk boards when 2 brackets are used (other bracket sold separately) Does not include mounting hardware Wide base provides a strong mounting platform Slotted mounting hole allows for adjustment during installation 1/8" Thick, galvanized steel construction is sturdy and resists corrosion Made in USA Specs: Quantity: 1 bracket Application: 6" and 8" wide bunk boards Dimensions: 15-1/2" long x 3" wide x 6" tall Mounting slot dimensions: 7-1/2" long x 1/2" wide This bracket holds two 2"x6" or 2"x8" bunk boards angled toward each other to provide support for one of the boat's pontoons.
... A swivel bolster lets you pivot your bunk so it sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Features to know about Centered, Scuff-Free Loading Swivel bolster brackets let you adjust your bunk boards to where they should be, so the hull sits right and loading feels smooth. The 2-3/4" vertical slot gives you the wiggle room to dial in bunk height for your boat, and the non-slip dimples bite into the board to prevent movement and boost load capacity.
Dutton-Lainson roller bunk bracket for boat trailers.Features: Roller bunk bracket for mounting Dutton-Lainson standard roller bunks Fits: DL21754 (model 6345) and DL21755 (model 6355) Formed of heavy gauge steel plate TUFFPLATE finish Sold individually 4 Needed to mount a pair of roller bunks Specs: Overall length: 10-3/4" Overall width: 3" Inside width: 2-3/4" Slot length: 7-1/4" Slot width: 7/16" Slots center-to-center: 1-1/4" Top bracket to the start of the slots: 3" Top of bracket to the end of the slots: 10-3/8" Hook: 1-3/4" wide Hole diameter: 3/8" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Keep your boat from drifting or rubbing the trailer. This 8" galvanized bracket secures side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Made for the Ramp: Hot-dip galvanized finish protects against road grit, spray, rain, and saltwater to help prevent rust. Sold Individually: Includes 1 bracket for setup on vertical bunks. Features to know about Vertical Bunk Brackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides; this bracket keeps them locked in place.
Filters
