Upgrade one 10K to 12K axle to disc brakes and get stronger, more consistent stopping power. This Kodiak kit includes everything for one axle, with rust-resistant coatings built for real-world towing.Specs Axle Rating: 10,000-12,000 lbs Rotor: Diameter: 11" Coating: Gal Dex Hub Compatibility: Bolt pattern: 8 on 6.5 Wheel studs: 5/8" Brake flange: 7-bolt Hub type: Grease or oil lubricated Wheel Compatibility: 16" dual wheel 17.5" single wheel Kit Includes: (2) 11" rotors (2) Calipers with pads Upper and lower brackets Spacers Mounting hardware for one axle
... Adjustable mounting brackets and hardware included. Fits 3-1/2" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: tandem-axle trailers with leaf spring suspensions Axle size: 3-1/2" diameter (typical 8,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 4 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
... Adjustable mounting brackets and hardware included. Fits 2-3/8" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: tandem-axle trailers with leaf spring suspensions Axle size: 2-3/8" diameter (typical 3,500-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 4 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
... Equalizers are 13-1/8" long. Designed for use with 9,000-lb Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5" Tall front hangers with 5/8" bolt holes (28-68-4) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 6-3/8" Tall rear hangers with 5/16" bolt holes (30-68-1) (2) 23-1/2 Long straight equalizers (13-119-03) Allows for 48-1/2" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (4) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 9,000 lbs 37-7/10" 48-1/2" 38-1/10" 4-7/8"
... Equalizers are 13-1/8" long. Designed for use with 9,000-lb Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5" Tall front hangers with 5/8" bolt holes (28-68-4) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 6-3/8" Tall rear hangers with 5/16" bolt holes (30-68-1) (2) 13-1/8" Long straight equalizers (13-117-03) Allows for 38" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (4) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 9,000 lbs 32-2/5" 38" 32-9/10" 4-7/8"
... Adjustable mounting brackets and hardware included. Fits 3" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: tandem-axle trailers with leaf spring suspensions Axle size: 3" diameter (typical 5,200-lb to 7,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 4 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
... Adjustable mounting brackets and hardware included. Fits 3-1/2" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 3-1/2" diameter (typical 8,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 6 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
... Equalizers are 14-1/4" long. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 14-1/4" Long, left-hand equalizer (13-107-7LH) Allows for 38" between axles (1) 14-1/4" Long, right-hand equalizer (13-107-8RH) Allows for 38" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 33" 38" 32-2/5" 5-1/2"
... Adjustable mounting brackets and hardware included. Fits 2-3/8" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 2-3/8" diameter (typical 3,500-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 6 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
... Equalizers are 24-5/8" long. Designed for use with 10,000-lb, general-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5-1/4" Tall front hangers with 3/4" bolt holes (28-74-2) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 4-1/2" Tall rear hangers (30-61-1) (2) 24-5/8" Long straight equalizers (13-141-3) Allows for 48-1/2" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (4) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (4) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs 38-1/3" 48-1/2" 37-7/10" 5"
... Equalizers are 24-3/4" long. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 24-3/4" Long, left-hand equalizer (13-109-3LH) Allows for 48-1/2" between axles (1) 24-3/4" Long, right-hand equalizer (13-109-4RH) Allows for 48-1/2" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 38-1/3" 48-1/2" 37-7/10" 5-1/2"
... Equalizers are 18-3/8" long. Designed for use with 10,000-lb, general-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5-1/4" Tall front hangers with 3/4" bolt holes (28-74-2) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 4-1/2" Tall rear hangers (30-61-1) (2) 18-3/8" Long straight equalizers (13-140-3) Allows for 42-1/4" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (4) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (4) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs 35-1/10" 42-1/4" 34-2/3" 5"
... Equalizers are 14-1/4" long. Designed for use with 10,000-lb, general-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5-1/4" Tall front hangers with 3/4" bolt holes (28-74-2) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 4-1/2" Tall rear hangers (30-61-1) (2) 14-1/4" Long straight equalizers (13-139-3) Allows for 38" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (4) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (4) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs 33" 38" 32-3/8" 5"
... Equalizers are 17-3/8" long. Designed for use with 9,000-lb Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5" Tall front hangers with 5/8" bolt holes (28-68-4) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 6-3/8" Tall rear hangers with 5/16" bolt holes (30-68-1) (2) 17-3/8" Long straight equalizers (13-118-03) Allows for 42-1/4" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (4) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 9,000 lbs 34-2/3" 42-1/4" 35" 4-7/8"
... Equalizers are 18-3/8" long. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 18-3/8" Long, left-hand equalizer (13-108-3LH) Allows for 42-1/4" between axles (1) 18-3/8" Long, right-hand equalizer (13-108-4RH) Allows for 42-1/4" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 35-1/10" 42-1/4" 34-2/3" 5-1/2"
... Adjustable mounting brackets and hardware included. Fits 3" axles.Features: Heavy-duty gas shocks absorb road vibration to provide a more comfortable towing experience Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising Adjustable mounting brackets allow the shocks to be positioned nearly vertically Limits up-and-down motion of trailer on both compression and rebound Shocks sit at an outward, 15-degree angle Helps to control trailer sway by limiting lateral movement Improves front-to-back, side-to-side, and up-and-down movement of your trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 3" diameter (typical 5,200-lb to 7,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 6 shocks Limited Lifetime Warranty This Comfort Ride suspension upgrade system greatly improves your towing experience.
Trailer suspension system replaces your leaf spring suspension to provide a stable ride. Walking beams keep weight distributed evenly between both axles. Pivoting arms help keep your trailer level on rough ground. Rubber springs absorb road shock.The included axle seats must be welded to your axle beam. If you already have seats on your axle, you will need to grind or cut the welds off to remove those seats and replace them with the Timbren axle seats.
Trailer suspension system replaces your leaf spring suspension to provide a stable ride. Walking beams keep weight distributed evenly between both axles. Pivoting arms help keep your trailer level on rough ground. Rubber springs absorb road shock.The included axle seats must be welded to your axle beam. If you already have seats on your axle, you will need to grind or cut the welds off to remove those seats and replace them with the Timbren axle seats.
Trailer suspension system replaces your leaf spring suspension to provide a stable ride. Walking beams keep weight distributed evenly between both axles. Pivoting arms help keep your trailer level on rough ground. Rubber springs absorb road shock.The included axle seats must be welded to your axle beam. If you already have seats on your axle, you will need to grind or cut the welds off to remove those seats and replace them with the Timbren axle seats.
Replaces the U-bolts needed to install your axle on your RV or trailer. Fits 3" axle tubes.Features: Replaces the U-bolts needed to install your axle on your RV or trailer Fits 3" axle tubes Includes: (2) 4" Wide x 6-1/8" long x 7/8" thick U-bolt plates (4) 3" U-bolts (8) 3/8"-24 Flange nuts
Trailer suspension system replaces your leaf spring suspension to provide a stable ride. Walking beams keep weight distributed evenly between both axles. Pivoting arms help keep your trailer level on rough ground. Rubber springs absorb road shock.The included axle seats must be welded to your axle beam. If you already have seats on your axle, you will need to grind or cut the welds off to remove those seats and replace them with the Timbren axle seats.
Trailer suspension system replaces your leaf spring suspension to provide a stable ride. Walking beams keep weight distributed evenly between both axles. Pivoting arms help keep your trailer level on rough ground. Rubber springs absorb road shock.The included axle seats must be welded to your axle beam. If you already have seats on your axle, you will need to grind or cut the welds off to remove those seats and replace them with the Timbren axle seats.
Trailer suspension system replaces your leaf spring suspension to provide a stable ride. Walking beams keep weight distributed evenly between both axles. Pivoting arms help keep your trailer level on rough ground. Rubber springs absorb road shock.The included axle seats must be welded to your axle beam. If you already have seats on your axle, you will need to grind or cut the welds off to remove those seats and replace them with the Timbren axle seats.
Add these 2 heavy-duty shock absorbers to your Roadmaster Comfort Ride kit for tandem-axle trailers (RM-2460) to upgrade the suspension on your triple-axle trailer. Mounting brackets and hardware are included. Fits 3" axles.Features: Add-on shock kit adapts your Roadmaster Comfort Ride system (RM-2460) for use with a triple-axle trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 3" diameter (typical 5,200-lb to 7,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 2 shocks 1-Year warranty
Filters
