Free up space on your trailer with this spare tire carrier. It mounts on your trailer's angle-iron railing with the included thread-locking bolt, so there's no drilling required. Sturdy powder coated steel is corrosion resistant.Easy Installation The carrier installs quickly and easily. Place the angle-iron bracket on the interior of the rail. Slide the spare tire bracket into the angle-iron bracket and bolt them together using the thread-locking bolt.
Replacing a cracked or discolored skylight garnish means you need a proper fit without guesswork. This neo-angle inner garnish fits matching 24" x 12" corner cutouts and lets in natural light, giving your ceiling a finished look.Highlights Matches Neo-Angle Cutouts: Fits 24" x 12" neo-angle openings with a 26" x 13-1/2" flange for proper interior coverage. Cleans Up Interior Finish: Covers exposed foam and wood for a flush, finished ceiling appearance.
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This smoke-tinted neo-angle replacement fits 24" x 12" openings, resists UV rays, and seals tight with included sealant to keep your RV dry and comfortable.Features: Replace a damaged or worn neo angled skylight on your RV, camper, or enclosed trailer Fits over a 24" wide x 12" long angled cutout - requires minimum roof thickness of 1-1/2" Durable polycarbonate is UV resistant and impact resistant Smoke-colored plastic tames bright light and reduces UV transmission Easy installation with included sealant Screws not included Made in the USA Specs: Overall dimensions: Skylight: 27" Wide x 14-1/2" Approximate bubble height: 5" Cutout dimensions: 24" wide x 12" long 1-Year warranty Takes the Guesswork Out of Replacement Sizing A big part of replacing a skylight is confirming the opening size when the old unit doesn't provide clear measurements.
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This white-tinted neo-angle replacement fits 24" x 12" openings, resists UV rays, and seals tight with included sealant to keep your RV dry and comfortable.The 4" bubble height raises the skylight above the roofline, allowing light to enter from more angles so your RV still feels bright and open during the day. Easy Installation with Included Sealant Get a waterproof install using the included sealant approved for use with polycarbonate plastic.
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This white-tinted neo-angle replacement fits 28" x 10" openings, resists UV rays, and seals tight with included sealant to keep your RV dry and comfortable.Features: Replace a damaged or worn neo angled skylight on your RV, camper, or enclosed trailer Fits over a 28" wide x 10" long angled cutout - requires minimum roof thickness of 1-1/2" Durable polycarbonate is UV resistant and impact resistant Translucent material diffuses light and reduces glare Easy installation with included sealant Screws not included Made in the USA Specs: Overall dimensions: Skylight: 32" wide x 13" long Approximate bubble height: 5" Cutout dimensions: 28" wide x 10" long 1-Year warranty Takes the Guesswork Out of Replacement Sizing A big part of replacing a skylight is confirming the opening size when the old unit doesn't provide clear measurements.
Replaces 1 single-acting angle cylinder on your Fisher snow plow. Angle cylinder helps angle your blade so you can easily clear the roads. Rod extends up to 31-1/4" so you can push snow easily off to the side.Features: Replaces single-acting angle cylinder for your Fisher snow plow Comparable to Fisher part number A3660 and 20117K Rod extends and retracts inside cylinder to angle the blade to the side to plow snow off the road 1 Port allows pressing power of single-acting cylinder Specs: Stroke: 12" Extended length (pinhole to pinhole): 31-1/4" Retracted length (pinhole to pinhole): 19-1/4" Maximum pressure rating: 2,500 psi Bore size: 1-1/2" diameter of cylinder Rod diameter (active end): 1-1/2" Base diameter (inactive end): 1-3/4" Pinhole diameter: 1" Port type: 1/4" NPT Port configuration: 90 degrees 1-Year warranty
A cracked skylight can quickly turn into leaks and water damage if left unchecked. This smoke-tinted neo-angle replacement fits 20" x 8" openings, resists UV rays, and seals tight with included sealant to keep your RV dry and comfortable.The 4" bubble height raises the skylight above the roofline, allowing light to enter from more angles so your RV still feels bright and open during the day. Easy Installation with Included Sealant Get a waterproof install using the included sealant approved for use with polycarbonate plastic.
This angle trim puts the finishing touch on your enclosed trailer by covering any exposed plywood edges. Aluminum construction is sturdy and rustproof. ... Features: Angle trim covers any exposed plywood edges on your enclosed trailer Can be used on the edge of your wooden ramp door Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 3/4" tall x 3/4" deep x 0.05" thick Made in the USA
Replacing a cracked or discolored skylight garnish means you need a proper fit without guesswork. This white neo-angle inner garnish fits matching 28" x 10" corner cutouts and diffuses harsh light, giving your ceiling a finished look.Highlights Matches Neo-Angle Cutouts: Fits 28" x 10" neo-angle openings with a 30" x 13-1/2" flange for proper interior coverage. Cleans Up Interior Finish: Covers exposed foam and wood for a flush, finished ceiling appearance.
Exposed plywood edges on trailers and ramp doors can wear down, splinter, or absorb water over time. This aluminum angle trim caps the edge to protect it from damage and help keep moisture out of the wood.Features to know about Matching Your Existing Trim If you're replacing worn trim or finishing exposed plywood edges, getting the right size and profile matters. Even angle means both legs of the trim are the same length. This angle trim is not trailer-specific. To get the right fit, you'll need to match it to your existing trim by measurement.
This angle trim puts the finishing touch on your enclosed trailer by covering any exposed plywood edges. Aluminum construction is sturdy and rustproof. ... Features: Angle trim covers any exposed plywood edges on your enclosed trailer Can also be used inside your trailer or on your trailer's ramp door Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 3/4" tall x 1-1/2" deep Made in the USA
Replaces 1 single-acting angle cylinder on your Western hydraulic snow plow. Angle cylinder helps angle your blade so you can easily clear the roads. Rod extends up to 27" so you can push snow easily off to the side.Features: Replaces single-acting angle cylinder for your Western snow plow Comparable to Western part number 56614 Rod extends and retracts inside cylinder to angle the blade to the side to plow snow off the road 1 Port allows pressing power of single-acting cylinder Specs: Stroke: 10" Extended length (pinhole to pinhole): 27" Retracted length (pinhole to pinhole): 17" Maximum pressure rating: 2,500 psi Bore size: 1-1/2" diameter of cylinder Rod diameter (active end): 1-1/2" Base diameter (inactive end): 1-3/4" Pinhole diameter: 3/4" Port type: #6 SAE Port configuration: 90 degrees 1-Year warranty
This angle trim puts the finishing touch on your enclosed trailer by covering any exposed plywood edges. Aluminum construction is sturdy and rustproof. ... Features: Angle trim covers any exposed plywood edges on your enclosed trailer Can be used inside your trailer or on your trailer's ramp spring door Aluminum construction is sturdy and rustproof Easy to customize and install Attaches with screws (not included) Can be cut to fit your specific application Dimensions: 93-1/2" long x 1" tall x 1-1/2" deep Made in the USA
Need to drain your RVs water lines for storage or winterizing? The Flair-It angle drain valve makes it easy to add a low-point drain. Just hand-tighten for a secure seal and empty your lines whenever you need.BPA-Free and Drinking Water Safe: Made from non-toxic materials that won't affect the taste or safety of your fresh water. Features to know about When to Use an Angle Drain Valve Need to fully drain your RV's fresh-water system before winter or storage? The Flair-It angle drain valve makes it easy to add a low-point or tank drain.
Exposed plywood edges on trailers and ramp doors can wear down, splinter, or absorb water over time. This aluminum angle trim caps the edge to protect it from damage and help keep moisture out of the wood.Features to know about Matching Your Existing Trim If you're replacing worn trim or finishing exposed plywood edges, getting the right size and profile matters. Even angle means both legs of the trim are the same length. This angle trim is not trailer-specific. To get the right fit, you'll need to match it to your existing trim by measurement.
Replaces 2 angle hoses and fittings for your Meyer hydraulic snow plow. 45" Long hoses have swivel fittings for simple installation. Also includes 2 swivel elbow fittings and 2 quick couplers.Features: Replaces 2 angle hoses and fittings on your Meyer hydraulic snow plow Includes: (2) 45" Long hoses with swivel fittings (2) 90-Degree swivel elbow fittings 2 Quick couplers Made in the USA Specs: Hose length: 45" Hose fittings: 1/4" NPT Maximum pressure rating: 5,000 psi Elbow dimensions: 2" long x 1-1/2" wide Coupler length: 2-3/4" 1-Year warranty
Rub marks, squeaks, or crooked loading? This swivel top angle replaces the pivoting head on your bolster bracket, letting your bunk sit flush to the hull. Pair it with an upright bracket to complete your setup.Highlights Lets the Bunk Follow the Hull: A slight pivot lets you adjust the angle of your bunk so it sits flush to your boat, spreading contact and cutting down on rub marks. Smoother Loading: The joint gives a little as you load and unload, which helps prevent pressure points and squeaks.
Replacing a cracked or discolored skylight garnish means you need a proper fit without guesswork. This neo-angle inner garnish fits matching 20" x 8" corner cutouts and lets in natural light, giving your ceiling a finished look.Highlights Matches Neo-Angle Cutouts: Fits 20" x 8" neo-angle openings with a 22-1/2" x 10" flange for proper interior coverage. Cleans Up Interior Finish: Covers exposed foam and wood for a flush, finished ceiling appearance.
Replaces 1 single-acting angle cylinder on your Boss snow plow. Angle cylinder helps angle your blade so you can easily clear the roads. Rod extends up to 27" so you can push snow easily off to the side.Features: Replaces single-acting angle cylinder for your Boss snow plow Comparable to Boss part number HYD01603 Rod extends and retracts inside cylinder to angle the blade to the side to plow snow off the road 1 Port allows pressing power of single-acting cylinder Specs: Stroke: 10" Extended length (pinhole to pinhole): 27" Retracted length (pinhole to pinhole): 17" Maximum pressure rating: 2,500 psi Bore size: 1-1/2" diameter of cylinder Rod diameter (active end): 1-1/2" Base diameter (inactive end): 2-3/8" Pinhole diameter: 5/8" Port type: 3/8" NPT Port configuration: inline 1-Year warranty
Exposed plywood edges on trailers and ramp doors can wear down, splinter, or absorb water over time. This aluminum angle trim covers the edge to protect it and create a clean, finished corner.Features to know about Matching Your Existing Trim If you're replacing worn trim or finishing exposed plywood edges, getting the right size and profile matters. Uneven angle means the two legs are different lengths. This angle trim is not trailer-specific. To get the right fit, you'll need to match it to your existing trim by measurement.
Replaces 1 single-acting angle cylinder on your Western snow plow. Angle cylinder helps angle your blade so you can easily clear the roads. Rod extends up to 27" so you can push snow easily off to the side.Features: Replaces single-acting angle cylinder for your Western snow plow Comparable to Western part number 25209 Rod extends and retracts inside cylinder to angle the blade to the side to plow snow off the road 1 Port allows pressing power of single-acting cylinder Specs: Stroke: 10" Extended length (pinhole to pinhole): 27" Retracted length (pinhole to pinhole): 17" Maximum pressure rating: 2,500 psi Bore size: 1-1/2" diameter of cylinder Rod diameter (active end): 1-1/2" Base diameter (inactive end): 1-3/4" Pinhole diameter: 1" Port type: 1/4" NPT Port configuration: inline 1-Year warranty
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.
Create a sturdy tie-down spot wherever you need it on your boat trailer. This aluminum bracket bolts to your trailer's frame, wall, or floor so you can secure your coolers or gear to prevent shifting during travel.Versatile Mounting: Bolts to your trailer's frame, wall, or floor - just add your own hardware. Angled for Easy Use: 30-degree mounting angle works with most tie-down setups and helps straps stay put. Aluminum Build: Won't rust like steel, so it's ready for saltwater or freshwater trips.
When snow spills off the ends of your blade, it takes more passes to finish the job. This genuine Meyer 45-degree wing kit converts your Lot Pro and AG moldboards into a box-style pusher so you can carry more snow and clear lots faster.Fits Steel and Poly Blades: Designed for Meyer Lot Pro and AG moldboards regardless of blade material. 45-Degree Fixed Wing Design: Angled wings help contain snow at the ends instead of spilling off the blade. Made in the USA: Built to match Meyer strength and fit standards.
Filters
