... Includes 2 levelers, 2 chocks, and a carry bag.The Andersen Camper Leveler lets you drive on until your trailer is perfectly level, then secure the wheel with the included chock. It's fast, intuitive, and accurate - perfect for setting up while solo.
Features: Provides leveling at any increment from 1/2" to 4" Works great on trailers up to 30,000 lbs with up to 32" diameter tires Customize to fit your specific application by trimming up to 4" off the chock Includes 1 leveler and 1 chock Leveler dimensions: 15-5/8" long x 6" wide x 4-1/4" tall Chock dimensions: 7-3/4" long x 6" wide x 3-1/4" tall Made in the USA Lifetime part replacement
This tire change kit makes swapping out a flat on your multi-axle trailer a total breeze. Just drive the good tire up onto the leveler to raise the adjacent tire up to 4" off the ground. You will be back on the road in no time.Features: No Jack, No Problem: Just drive your good tire onto the mini jack and it lifts the flat one for you Strong and Mighty: Mini jack raises up to 4" and handles up to 30,000 lbs Essential Tools: Includes an extendable lug wrench, 2 reversible sockets, a Tuff Chock, and a carry bag Ideal for Multi-Axle Trailers: Can also be used as a leveler for single-axle trailers Made in the USA: Proudly manufactured in the United States Specs: Lifting height: 4" Socket sizes: 11/16", 3/4", 13/16", 7/8" Lug wrench extension: 14" to 21" Weight capacity: 30,000 lbs 1-Year limited warranty
Raise your trailer quickly and effectively with the Rapid Jack from Andersen Manufacturing. Simply drive your trailer onto the jack for a quick boost. Also functions as a leveler for single-axle trailers and as a trailer jack base.Features: Raise trailer wheels quickly and easily Drive good wheel of double-axle trailer onto the jack to raise the other axle and change the bad tire Level wheels of single-axle trailers Place small end of jack under wheel and drive up until level Will not work as leveler for multi-axle trailers because the jack is too large to fit in between tires To level multi-axle trailers, use the Rapid Camper Leveler instead (AM3604) Use as a trailer jack base by turning the Rapid Jack on its side and resting the shaft of your trailer jack in the molded circle Includes rubber grip to prevent slipping Made in the USA Specs: Leveler height: 6-7/8" Leveler length: 17" Width: 6" Constructed from recycled plastic materials (100 percent) Weight capacity: 20,000 lbs 1-Year limited warranty
Pulling onto an uneven site can leave one side low with no easy way to fine-tune height. These curved levelers raise the tire gradually as you roll onto them, letting you stop exactly where level lines up.Highlights Gradual Tire Lift for Leveling: Curved ramp raises the tire in stages so you can stop at the right height. Complete Leveling Kit Included: Comes with 2 levelers, 2 chocks, 2 anti-slip pads, and 1 carry bag.
This curved leveler includes an interlocking chock to make sure that it stays in place without accidentally slipping out. When used together, they can give your trailer up to 4-1/2" of lift to quickly and easily correct side-to-side tilting.Features: Curved leveler corrects tilting for a tandem-axle trailer quickly and easily Place under tires on one side and drive forward until level Adds up to 4-1/2" to one side Chock's grooved surface matches leveler to keep your trailer securely in place Stop line molded on side to prevent accidental roll offs Apply brakes once the stop line touches the ground Specs: Quantity: 2 levelers and 2 wheel chocks Wheel chock dimensions: 7" long x 5-3/4" wide x 5" tall 1-Year warranty
This leveling system contains everything you need to stabilize your trailer or RV at home or the campsite. High-impact polyurethane resists damage and is treaded for maximum grip. ... Features: Comprehensive kit easily levels your trailer or RV Includes 2 levelers, 2 wheel chocks, and 4 jack pads Compact levelers help your trailer stay flat on any surface Adjust to any height up to 4-1/2" Works with tires sizes up to 32" wide Ribbed bottom keeps ramps firmly in place on the ground Treaded surface grips your tire for added stability Heavy-duty wheel chocks keep your trailer from rolling when it's parked and leveled Drainage holes prevent water buildup from reducing traction Jack pads serve as stabilizing cushions so the leveling system won't sink into the ground Connectable design allows the system to nest together for compact storage High-impact polyurethane holds up under tremendous weight Resists scuffs and abrasions Specs: Quantity: 2 leveling ramps, 2 wheel chocks, and 4 jack pads Ramp dimensions: 16-9/16" long x 14-9/16" wide x 4-1/2" tall System weight: 9.9 lbs 1-Year warranty
This curved leveler includes an interlocking chock to make sure that it stays in place without accidentally slipping out. When used together, they can give your trailer up to 4-1/2" of lift to quickly and easily correct side-to-side tilting.Features: Curved leveler corrects tilting for a single-axle trailer quickly and easily Place under tire and drive forward until level Adds up to 4-1/2" to one side Chock's grooved surface matches leveler to keep your trailer securely in place Stop line molded on side to prevent accidental roll offs Apply brakes once the stop line touches the ground Specs: Quantity: 1 leveler and 1 wheel chock Wheel chock dimensions: 7" long x 5-3/4" wide x 5" tall 1-Year warranty
Leveler helps keep your RV flat while on uneven terrain. Included chock supports leveler. Anti-slip rubber mat keeps leveler and chock in place. ... Features: Leveler helps your RV stay flat when it is parked on uneven terrain Drive up onto wedge to balance out your motorhome Included chock supports leveler Anti-slip rubber mat keeps leveler and chock in place Curved edges allow for easy removal Compact size fits between your tires and allows easy storage when not in use Cross brace design is sturdy and long-lasting Made in the USA Specs: Quantity: 1 leveler, chock, and mat Weight capacity: 30,000 lbs Lift: up to 4" Dimensions: 11" long x 7" wide x 4-1/4" tall 2-Year limited warranty
Balance made easy. This RV leveling kit keeps things simple - no stacking blocks or second-guessing. Just pull onto the curved levelers, drop the chocks in, and you're done. ... Highlights Smooth Leveling: Curved levelers let you roll forward until your trailer is stable and sitting just right. Stays in Place: Chocks slide in under the levelers to help keep everything from shifting.
Pair of levelers help you achieve stability for your vehicle in uneven terrain. Large surface area keeps things stable and accommodates larger tires. ... Features: Levelers let you park your vehicle in uneven terrain Large surface area for increased stability Larger access for wider tires UV proof, stable HD PE material Storage bag included Black color Specs: Overall height: 5-3/4" Leveling heights: Tallest level: 4-1/2" Middle level: 3" Lowest level: 1-3/4" Dimensions: 22" long x 7-5/8" wide Weight capacity: 10,000 lbs Quantity: 2 levelers 2-Year warranty
This leveling kit contains everything you need to stabilize your trailer or RV at home or the campsite. Convenient storage bag included to keep your kit components secure and easy to find when they're not in use.Features: Comprehensive kit easily levels your trailer or RV Includes 2 levelers, 2 wheel chocks, 2 anti-slip mats, and a storage bag Compact levelers help your trailer stay flat Adjust to any height between 1/2" - 4" Works with tires sizes up to 32" Rubber pads provide extra grip on smooth surfaces Heavy-duty rubber wheel chocks keep your trailer from rolling when it's parked and leveled Storage bag keeps all kit components secure and easy to find when not in use Made in the USA Specs: Weight capacity: trailers up to 30,000 lbs Measurements: Leveler: 13" long x 5-3/4" wide x 4-1/4" tall Chock: 7-1/2" long x 5-3/4" wide x 3-1/4" tall Limited lifetime warranty
This comprehensive leveling kit contains everything you need to stabilize your trailer or RV at home or the campsite. Convenient storage bag included to keep your kit components secure and easy to find when they're not in use.Features: Comprehensive kit contains everything you need to stabilize your trailer or RV Includes 1 base pad peak, 4 base pads, 2 wheel chocks, 2 base pad levelers, 2 anti-slip mats, and a storage bag Base pad peak works as a jack stand to provide a platform that supports the weight of your tongue or stabilizer jack 5/8" Base pads add height and stability on soft surfaces like hot asphalt or sand Compact levelers help your trailer stay flat Non-skid traction mats go under levelers to limit their movement as you drive up Oversized, heavy-duty rubber wheel chocks keep your trailer from rolling when it's parked and leveled Blue storage bag keeps all kit components secure and easy to find when not in use Made in the USA Specs: Base pad peak: Weight capacity: 3,500 lbs Dimensions: 12-7/8" long x 10-1/4" wide x 8" tall Base pad dimensions: 9" long x 6" wide x 5/8" thick Chocks: Weight: 4 lbs per chock Dimensions: 7-3/4" long x 5-7/8" wide Levelers: Weight capacity: 30,000 lbs per leveler Dimensions: 11" long x 7" wide x 4-1/4" tall
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
... The rubber top and base are grippy and stable, while the plastic core supports over 40,000 lbs. Supports trailer jacks and stabilizers or can be used as leveling blocks for even the largest RVs.Features: Universal jack pads use both rubber and plastic for stability and toughness Position beneath jacks, stabilizers or trailer wheels Individual layers can be separated for a variety of configurations Remove rubber pieces to allow cores to interlock with each other Stack them in a column or as a pyramid for RV leveling Grab handle built in Specs: Quantity: 1 block Individual block dimensions: 12" long x 12" wide x 2" high 1-3/4" tall without top rubber installed Extra cores add 1-1/2" height when stacked Weight: 7.6 lbs Weight capacity: 40,000 lbs 2-Year limited warranty Note: When in use, place the handle to the side, not where the tire will be driving on or off.
Levelers help keep your RV flat while on uneven terrain. Included chocks support levelers. Anti-slip rubber mats keep leveler and chock in place. ... Features: Levelers help your RV stay flat when it is parked on uneven terrain Drive up onto wedges to balance out your motorhome Included chocks support levelers Anti-slip rubber mats keeps leveler and chock in place Curved edges allow for easy removal Compact size fits between your tires and allows easy storage when not in use Cross brace design is sturdy and long-lasting Made in the USA Specs: Quantity: 2 levelers, chocks, and mats Weight capacity: 30,000 lbs per leveler Lift: up to 4" Dimensions: 11" long x 7" wide x 4-1/4" tall 2-Year limited warranty
Perfect for Class A, B, and C motorhomes with Equalizer leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds stability on soft ground. ... Features: Heavy-duty rubber pads snap onto your Class A, B,or C motorhome's Equalizer leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Class A, B, and Class C motorhomes (see chart below) with Equalizer leveling systems and (4) 10" octagonal jack feet Dimensions: 13-1/4" long x 13-1/4" wide x 2-3/4" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Perfect for fifth wheels and motorhomes with Lippert leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. ... Features: Heavy-duty rubber pads snap onto your 5th wheel or Class A, B, or C motorhome's Lippert leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: 5th-wheel campers and Class A, B, and C motorhomes (see chart below) with Lippert leveling systems and (4) 9" round jack feet Dimensions: 11" long x 11" wide x 2" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Designed for travel trailers with Lippert Level Up jacks with 5-1/2" to 5-5/8" square feet.Sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your trailer's Level Up leveling jacks from Lippert to make leveling faster and easier Eliminates the need to crawl under your trailer to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your trailer Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Travel trailers with Lippert Level Up leveling jacks with 5-1/2" - 5-5/8" square jack feet Diameter: 8-1/8" Weight: 2.7 lbs per pad Includes 4 pads 2-Year limited warranty Foot Pad Consideration SnapPad feet are carefully engineered to snap onto flat landing feet.
Perfect for motorhomes with Equalizer leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground. ... Features: Heavy-duty rubber pads snap onto your travel trailer or Class B or C motorhome's Equalizer leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your motorhome Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Travel trailers and Class B and C motorhomes (see chart below) with Equalizer leveling systems and (4) 7" square jack feet Dimensions: 9" long x 9" wide x 2" tall 2-Year limited warranty Check the listings below for some of the most common rigs that are compatible with this system.
Designed for travel trailers with Lippert Level Up jacks with 5-3/4" to 6" square jack feet. Sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. ... Features: Heavy-duty rubber pads snap onto your trailer's Level Up leveling jacks from Lippert to make leveling faster and easier Eliminates the need to crawl under your trailer to position plastic pads or wood blocks Increased surface area of your leveling jack's feet provides added support for your trailer Prevents sinking into soft ground, unlike smaller metal feet Durable, heavy-duty rubber is made from recycled tires Grips uneven terrain and prevents metal feet from rusting or bending Serves as a cushion so metal feet won't crack or chip your driveway Helps dampen vibration from inside motorhome that could cause shifting Built-in drains release moisture to prevent jack feet from corroding Simple, one-time installation Line up the pads beneath the jack feet and lower each foot until the lip on the pad fully engages and locks in place No need to remove and replace pads or carry other jack pads or blocks around with you Made in USA Specs: Application: Travel trailers with Lippert Level Up leveling jacks with 5-3/4" - 6" square jack feet Diameter: 8-1/2" Height: 2" Weight: 2.8 lbs per pad Includes 4 pads 2-Year limited warranty Foot Pad Consideration SnapPad feet are carefully engineered to snap onto flat landing feet.
Filters
