Machine-finished rotors and e-coated calipers and mounting brackets are included in this 2-wheel-assembly disc brake kit. Designed for 12,000-lb ALKO axles with #120 spindles.Features: Brake assemblies make it easy to change from an idler axle to a disc brake axle Disc brakes deliver better performance than drum brakes More consistent stopping, even at highway speeds Dramatically shorter stopping distance Maintenance costs are lower than for drum brakes Fewer moving parts to maintain, repair and replace Slip-on, cast iron, over-the-hub rotors Fit over idler hubs and are held in place by included bolts Rotor spacers ensure proper positioning Prevent heat-related damage with vented design that effectively dissipates heat E-coat finish on calipers and brackets provides corrosion resistance for freshwater and limited saltwater use Cast iron calipers are self-adjusting for smooth, equal braking Cast iron construction does not flex like aluminum Low-drag design retracts piston farther than other calipers for a cooler-running brake Stainless steel piston is 2-1/2" in diameter - 30 percent larger than other brands More braking torque than the competition High-performance, ceramic brake pads Ductile iron mounting brackets provide strength and durability Side-support design ensures that load is placed on bracket, not bolts Extra embossing for additional thread contact ensures tight, secure mounting for caliper guide bolts Kit includes 2 full brake assemblies 2 Machine-finished, cast iron rotors 2 Rotor spacers 2 E-coated, cast iron calipers 2 E-coated, ductile iron caliper-mounting brackets 4 Stainless steel caliper-mounting bolts Hydraulic brake actuator and lines (sold separately) are required for brakes to be activated Requires psi rating of at least 1,500 Specs: Fits: Axle capacity: 12,000 lbs Axle type: ALKO #120 Spindle Rotor diameter: 11.35" Brake flange to inner bearing shoulder: 4.78" Pilot hole diameter: 4.88" 3-Year warranty Bearing, Race and Seal Information Bearings (sold separately) Inner bearing: JM511946 Outer bearing: JM205149 Races (included) Inner race: JM511910 Outer race: JM205110 Seal: 10-56 (sold separately) Inner diameter: 3.125" Outer diameter: 4.5" Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle. Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer.Features: This bearing and race kit has everything to replace the bearings on 1 hub of your Lippert, Dexter, or AL-KO 3,500-lb axle Includes inner and outer bearings and races, seal, cotter pin, and EZ lube spindle washer Specs: L44649 Bearing inner diameter: 1.063" L68149 Bearing inner diameter: 1.378" L44610 Race outer diameter: 1.980" L68111 Race outer diameter: 2.361" Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D.
Need new hydraulic drum brakes that fit on your Dexter, Lippert, and AL-KO/Hayes axles? Look no further. 7" x 1-3/4" Assemblies fit wheels 16" or larger. 4-Bolt pattern backing plates. Made in the USA.
Replaces the oil cap, O-ring, and plug for your AL-KO or Rockwell axle. Fits 10,000-lb - 16,000 lb heavy-duty axles.Features: Replaces the oil cap, O-ring, and plug for your AL-KO or Rockwell axle Fits 10,000-lb - 16,000 lb heavy-duty axles Made in the USA Note: Direct replacement for Alko oil cap kit K568220
Replace the oil/grease cap, O-ring, and plug on your AL-KO axle. Aluminum alloy body dissipates heat and magnetic vent plug removes damaging metal particles. Easy access side port lets you add or drain lube without removing cap. ... Features: Replaces the oil bath/grease cap, O-ring, and plug on these AL-KO axles: AL-KO 6K, 7K, and 8K axles Direct replacement for these AL-KO and Dexter oil caps: AL-KO: 568268 Dexter: K71-845-00 Cap functions as either an oil bath or grease cap Magnetic vent plug attracts damaging metal particles Helps identify problems before they become critical Aluminum alloy body with black e-coat finish resists corrosion Clear viewing lens lets you quickly check oil level Easy-to-access side port lets you fill or drain lubricant without removing the cap O-ring and gasket provide a tight seal Threaded cap installs easily Includes 1 cap, 1 watertight O-ring seal, and 1 magnetic vent plug Specs: Application: 6,000-lb to 8,000-lb axles Thread outer diameter: 2.875" 5-Year limited warranty
Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle.Features: Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle Includes: 1 Outer bearing (L44649) 1 Inner bearing (L68149) 1 Inner cup (L68111) 1 Outer cup (L44610) 1 Grease seal (10-19) 1 Cotter pin 1 Tang washer for EZ-Lube spindles Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D.
Upgrade to disc brakes with these slip-on rotors and get safer, more consistent braking. Tow your boat and launch in either fresh or brackish water? The Maxx coating on this brake kit is even better than Dacromet for superior corrosion protection.
Dacromet-plated rotors, as well as stainless steel calipers and mounting brackets, are included with this 2-wheel-assembly disc brake kit. Designed for 8,000-lb AL-KO or Quality axles and 16" and larger wheels. Requires 5/8" wheel bolts.Features: Brake assemblies make it easy to change from an idler axle to a disc brake axle Disc brakes deliver better performance than drum brakes More consistent stopping, even at highway speeds Dramatically shorter stopping distance Maintenance costs are lower than for drum brakes Fewer moving parts to maintain, repair and replace Slip-on, cast iron, over-the-hub rotors Fit over standard idler hub and are held in place by wheel and wheel bolts Remove easily for maintenance No need to replace entire hub-and-rotor assembly if only hub or rotor becomes damaged Increase distance from hub face to hub face by 1/2" Prevent heat-related damage with vented design that effectively dissipates heat Stainless steel calipers are self-adjusting for smooth, equal braking Stainless steel construction does not flex like aluminum Absolute corrosion protection - ideal for extended marine use Low-drag design retracts piston farther than other calipers for a cooler-running brake Stainless steel piston is 2-1/4" in diameter - 30 percent larger than other brands More braking torque than the competition High-performance, ceramic brake pads Stainless steel mounting brackets provide strength and durability Side-support design ensures that load is placed on bracket, not bolts Extra embossing for additional thread contact ensures tight, secure mounting for caliper guide bolts 4-Bolt brake flange mounting configuration - weld-on flange sold separately Kit includes 2 full brake assemblies 2 Dacromet-plated, cast iron rotors 2 Stainless steel calipers 2 Stainless steel caliper-mounting brackets 4 Stainless steel caliper-mounting bolts Hydraulic brake actuator and lines (sold separately) are required for brakes to be activated Requires psi rating of at least 1,500 Specs: Fits: Axle capacity: 8,000 lbs #42 Spindle Axle type: AL-KO/Quality Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Wheel bolt diameter: 5/8" Rotor diameter: 13" Brake flange configuration: 4 bolt 3-Year warranty Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Kit includes 13-1/8" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with H202 or H238 hangers for a complete tandem-axle kit.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Hangers sold separately Includes: (2) 13-1/8" Long straight equalizers (13-44) 7/8" Diameter center hole for mounting to hanger 9/16" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 3-1/2" Long x 9/16" diameter shackle bolts (91635B) (4) 9/16" Diameter locknuts (916DLN) (2) 4-1/2" Long x 7/8" diameter wet equalizer bolts (7-1-1) (2) 7/8" Diameter locknuts for 7-1-1 (6-111) Use in conjunction with either H202 or H238 for complete kit H202 and H238 contain front, center and rear hangers Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles Does not include components for mounting axle to springs
Kit includes 18-3/8" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-158-00 for a complete tandem-axle kit. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Includes: (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 18-3/8" Long straight equalizers (13-140-3) Allows for 42-1/4" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (2) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (2) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Use in conjunction with HAP-158-00 for complete kit HAP-158-00 contains front and rear hangers and mounting hardware Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs
Kit includes 10-1/8" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with H202 or H238 hangers for a complete tandem-axle kit.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Hangers sold separately Includes: (2) 10-1/8" Long, swan-shaped equalizers (13-4) 7/8" Diameter center hole for mounting to hanger 9/16" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 3-1/2" Long x 9/16" diameter shackle bolts (91635B) (4) 9/16" Diameter locknuts (916DLN) (2) 4-1/2" Long x 7/8" diameter wet equalizer bolts (7-1-1) (2) 7/8" Diameter locknuts for 7-1-1 (6-111) Use in conjunction with either H202 or H238 for complete kit H202 and H238 contain front, center and rear hangers Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles Does not include components for mounting axle to springs Part Number A B C D E F 13-4 4-5/8" 5-1/2" 5" 9/16" 5/16" 7/8"
Kit includes 24-5/8" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-158-00 for a complete tandem-axle kit. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Includes: (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 24-5/8" Long straight equalizers (13-141-3) Allows for 48-1/2" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (2) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (2) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Use in conjunction with HAP-158-00 for complete kit HAP-158-00 contains front and rear hangers and mounting hardware Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs
Kit includes 23-1/2" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-105-00 for a complete tandem-axle kit. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Includes: (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 23-1/2" Long straight equalizers (13-119-03) Allows for 48-1/2" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (2) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (2) 5/16" Diameter locknuts (6-11) (2) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (2) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Use in conjunction with HAP-105-00 for complete kit HAP-105-00 contains front and rear hangers and mounting hardware Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs
Kit includes 14-1/4" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-158-00 for a complete tandem-axle kit. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Includes: (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 14-1/4" Long straight equalizers (13-139-3) Allows for 38" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to hanger (2) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (2) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Use in conjunction with HAP-158-00 for complete kit HAP-158-00 contains front and rear hangers and mounting hardware Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs
Kit includes 18-3/8" long equalizers and bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-103-00 for a complete tandem-axle kit. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location (when used with HAP-103-00) Includes: (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (1) 18-3/8" Long, left-hand equalizer (13-108-3LH) Allows for 42-1/4" between axles (1) 18-3/8" Long, right-hand equalizer (13-108-4RH) Allows for 42-1/4" between axles (2) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (2) 1/2" Diameter locknuts (6-46) (2) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (2) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Use in conjunction with HAP-103-00 for complete kit HAP-103-00 includes front and rear hangers and mounting hardware Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 35-1/10" 42-1/4" 34-2/3" 5-1/2"
Kit includes 17-3/8" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-105-00 for a complete tandem-axle kit. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Includes: (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 17-3/8" Long straight equalizers (13-118-03) Allows for 42-1/4" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (2) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (2) 5/16" Diameter locknuts (6-11) (2) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (2) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Use in conjunction with HAP-105-00 for complete kit HAP-105-00 contains front and rear hangers and mounting hardware Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs
Kit includes 13-1/8" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-105-00 for a complete tandem-axle kit. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Includes: (2) 4-1/2" Tall center hangers with 1" bolt holes (2) 13-1/8" Long straight equalizers Allows for 38" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (2) 3-1/4" Long x 5/16" diameter spring keeper bolts (2) 5/16" Diameter locknuts (2) 4-1/2" Long x 5/8" diameter spring-eye bolts (2) 5/8" Diameter locknuts (2) 5" Long x 1" diameter equalizer bolts (2) 1" Diameter locknuts Use in conjunction with HAP-105-00 for complete kit HAP-105-00 contains front and rear hangers and mounting hardware Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs
Kit includes 24-3/4" long equalizers and bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-103-00 for a complete tandem-axle kit. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location (when used with HAP-103-00) Includes: (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (1) 24-3/4" Long, left-hand equalizer (13-109-3LH) Allows for 48-1/2" between axles (1) 24-3/4" Long, right-hand equalizer (13-109-4RH) Allows for 48-1/2" between axles (2) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (2) 1/2" Diameter locknuts (6-46) (2) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (2) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Use in conjunction with HAP-103-00 for complete kit HAP-103-00 includes front and rear hangers and mounting hardware Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 38-1/3" 48-1/2" 37-7/10" 5-1/2"
Kit includes 14-1/4" long equalizers and bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-103-00 for a complete tandem-axle kit. ... Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location (when used with HAP-103-00) Includes: (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (1) 14-1/4" Long, left-hand equalizer (13-107-7LH) Allows for 38" between axles (1) 14-1/4" Long, right-hand equalizer (13-107-8RH) Allows for 38" between axles (2) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (2) 1/2" Diameter locknuts (6-46) (2) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (2) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Use in conjunction with HAP-103-00 for complete kit HAP-103-00 includes front and rear hangers and mounting hardware Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 33" 38" 32-2/5" 5-1/2"
Kit includes 10-1/8" long equalizers and necessary bolts and shackles for suspending your leaf springs from your trailer frame. Use with H302 hangers for a complete triple-axle kit.Features: Attaches 6 leaf springs (sold separately) to your trailer frame Hangers sold separately Includes: (4) 10-1/8" Long, swan-shaped equalizers (13-4) 7/8" Diameter center hole for mounting to hanger 9/16" Diameter side hole for attaching to spring (6) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (6) 5/16" Diameter locknuts (6-11) (6) 3-1/2" Long x 9/16" diameter shackle bolts (91635B) (6) 9/16" Diameter locknuts (916DLN) (4) 4-1/2" Long x 7/8" diameter wet equalizer bolts (7-1-1) (4) 7/8" Diameter locknuts for 7-1-1 (6-111) Use in conjunction with H302 for complete kit H302 contains front, center and rear hangers Designed for use on trailers with triple, 3,500-lb to 8,000-lb axles Does not include components for mounting axle to springs
Caliper-mounting bracket is designed for use with 13" rotors or hub-and-rotor assemblies that have an 8 on 6-1/2 bolt pattern and either 9/16" or 5/8" wheel bolts. Bracket mounts onto 4-bolt AL-KO, 8,000-lb brake flange.Features: Heavy-duty, ductile iron construction E-coat finish provides corrosion resistance for freshwater and limited saltwater use Embossed bolt holes provide extra thread contact for caliper guide bolts Tight, secure connection between bracket and caliper Side support ensures that load is carried by bracket, not bolts Stiffeners reduce vibration when you brake Universal design works for either left-hand or right-hand assemblies Specs: Application: calipers on disc brakes with over-the-hub rotors or 1-piece hub-and-rotor assemblies Axle rating: 8,000 lbs Axle type: AL-KO Rotor diameter: 13" Brake flange configuration: 4 bolt 3-Year warranty
Caliper-mounting bracket works with 13" rotors or hub-and-rotor assemblies that have an 8 on 6-1/2 bolt pattern and either 9/16" or 5/8" wheel bolts. Bracket mounts onto 4-bolt brake flange on 8,000-lb AL-KO/Quality axles.Features: Heavy-duty ductile iron construction Dacromet plating provides superior corrosion resistance for freshwater or saltwater use 300- to 400-Hour salt-spray rating Embossed bolt holes provide extra thread contact for caliper guide bolts Tight, secure connection between bracket and caliper Side support ensures that load is carried by bracket, not bolts Stiffeners reduce vibration when you brake Universal design works for either left-hand or right-hand assemblies Specs: Application: calipers on disc brakes with over-the-hub rotors or 1-piece hub-and-rotor assemblies Axle rating: 8,000 lbs Axle type: AL-KO or Quality Rotor diameter: 13" Brake flange configuration: 4 bolt 3-Year warranty
Magnet kit with green wire allows you to replace the worn out magnet on 10" trailer brakes, rather than having to replace the entire assembly. The oval design increases the efficiency while also extending the life of the magnet.
Trailer Ventilated Brake Magnet for Hayes and AL-KO 12-1/4" x 3-1/2" Electric Brakes Fits 9K through 12K axles Fits 9K brake after 1995 Fits 10K brake after 1987 Fits 12K brake after 1989 Will not replace the old-style oval magnet Includes clip to hold in place
Filters
