Use this 24" long hose to connect a propane cylinder to your RV or trailer's propane regulator. The Type 1 ACME nut provides easy connection to the propane tank. Provides protection in case of fire or a broken gas line.Features: 24" Supply hose lets you connect an auxiliary propane cylinder to your RV or trailer's propane regulator Type 1 ACME nut at one end connects to ACME or P.O.L. connection on your propane tank 1/4" Inverted male flare at the other end connects to the 1/4" inverted female flare on your propane regulator Connects to the female inverted flare on CAM59123 and CAM59125 (sold separately) Provides thermal protection in case of fire and excess flow protection in case of broken gas line Rated for 200,000 Btu/hour Brass fittings resist rust and corrosion 59153 Camco Motor Home or Trailer LP Gas Supply Hose with ACME Nut and Inverted Male Flare - Twenty-Four Inches Long
Use this 36" long hose to connect a propane cylinder to your RV or trailer's propane regulator. The Type 1 ACME nut provides easy connection to the propane tank. Provides protection in case of fire or a broken gas line.Features: 36" Supply hose lets you connect an auxiliary propane cylinder to your RV or trailer's propane regulator Type 1 ACME nut at one end connects to ACME or P.O.L. connection on your propane tank 1/4" Inverted male flare at the other end connects to the 1/4" inverted female flare on your propane regulator Connects to the female inverted flare on CAM59123 and CAM59125 (sold separately) Provides thermal protection in case of fire and excess flow protection in case of broken gas line Rated for 200,000 Btu/hour Brass fittings resist rust and corrosion 59173 Camco Motor Home or Trailer LP Gas Supply Hose with ACME Nut and Inverted Male Flare - Thirty-Six Inches Long
Use this 12" long hose to connect a propane cylinder to your RV or trailer's propane regulator. The Type 1 ACME nut provides easy connection to the propane tank. Provides protection in case of fire or a broken gas line.Features: 12" Supply hose lets you connect an auxiliary propane cylinder to your RV or trailer's propane regulator Type 1 ACME nut at one end connects to ACME or P.O.L. connection on your propane tank 1/4" Inverted male flare at the other end connects to the 1/4" inverted female flare on your propane regulator Connects to the female inverted flare on CAM59123 and CAM59125 (sold separately) Provides thermal protection in case of fire and excess flow protection in case of broken gas line Rated for 200,000 Btu/hour Brass fittings resist rust and corrosion 59053 Camco Motor Home or Trailer LP Gas Supply Hose with ACME Nut and Inverted Male Flare - Twelve Inches Long
Use this green fitting to adapt your refillable, 20-lb or 30-lb propane cylinder for use with a regulator that has a 1/4" female NPT connector. Rated for 200,000 Btu/hr.Features: Fitting lets you connect a refillable propane tank to a regulator with a 1/4" female NPT connector 1/4" Male NPT on one end connects to regulator ACME nut on the other end connects to propane tank hose Provides thermal protection in case of fire and excess flow protection in case of broken gas line Rated for 200,000 Btu/hr Green color
Use this 6' long hose to hook up a Quick-Connect grill valve to a 5-lb or 20-lb propane cylinder. The hose has a female Quick-Connect connector on one end and an ACME nut on the other end. Designed for use only with low-pressure gas appliances.Features: Hose lets you hook up a Quick-Connect grill valve to a 5-lb or 20-lb propane cylinder Designed for use with low-pressure gas appliances 6' Long regulator hose with shut-off valve included 57629 Camco LP Gas Hose w/ Shutoff Valve - Female Quick-Connect x ACME
Use this 60" long hose to connect a propane cylinder to your RV or trailer's propane regulator. The Type 1 ACME nut provides easy connection to the propane tank. Provides protection in case of fire or a broken gas line.Features: 60" Supply hose lets you connect an auxiliary propane cylinder to your RV or trailer's propane regulator Type 1 ACME nut at one end connects to ACME or P.O.L. connection on your propane tank 1/4" Inverted male flare at the other end connects to the 1/4" inverted female flare on your propane regulator Connects to the female inverted flare on CAM59123 and CAM59125 (sold separately) Provides thermal protection in case of fire and excess flow protection in case of broken gas line Rated for 200,000 Btu/hour Brass fittings resist rust and corrosion 59193 Camco Motor Home or Trailer LP Gas Supply Hose with ACME Nut and Inverted Male Flare - Sixty Inches Long
Use this 20" long hose to connect a propane cylinder to your RV or trailer's propane regulator. The Type 1 ACME nut provides easy connection to the propane tank. Provides protection in case of fire or a broken gas line.Features: 20" Supply hose lets you connect an auxiliary propane cylinder to your RV or trailer's propane regulator Type 1 ACME nut at one end connects to ACME or P.O.L. connection on your propane tank 1/4" Inverted male flare at the other end connects to the 1/4" inverted female flare on your propane regulator Connects to the female inverted flare on CAM59123 and CAM59125 (sold separately) Provides thermal protection in case of fire and excess flow protection in case of broken gas line Rated for 200,000 Btu/hour Brass fittings resist rust and corrosion 59073 Camco Motor Home or Trailer LP Gas Supply Hose with ACME Nut and Inverted Male Flare - Twenty Inches Long
Use this 15" long hose to connect a propane cylinder to your RV or trailer's propane regulator. The Type 1 ACME nut provides easy connection to the propane tank. Provides protection in case of fire or a broken gas line.Features: 15" Supply hose lets you connect an auxiliary propane cylinder to your RV or trailer's propane regulator Type 1 ACME nut at one end connects to ACME or P.O.L. connection on your propane tank 1/4" Inverted male flare at the other end connects to the 1/4" inverted female flare on your propane regulator Connects to the female inverted flare on CAM59123 and CAM59125 (sold separately) Provides thermal protection in case of fire and excess flow protection in case of broken gas line Rated for 200,000 Btu/hour Brass fittings resist rust and corrosion 1-Year warranty
Use this 30" long hose to connect a propane cylinder to your RV or trailer's propane regulator. The Type 1 ACME nut provides easy connection to the propane tank. Provides protection in case of fire or a broken gas line.Features: 30" Supply hose lets you connect an auxiliary propane cylinder to your RV or trailer's propane regulator Type 1 ACME nut at one end connects to ACME or P.O.L. connection on your propane tank 1/4" Inverted male flare at the other end connects to the 1/4" inverted female flare on your propane regulator Connects to the female inverted flare on CAM59123 and CAM59125 (sold separately) Provides thermal protection in case of fire and excess flow protection in case of broken gas line Rated for 200,000 Btu/hour Brass fittings resist rust and corrosion 59163 Camco Motor Home or Trailer LP Gas Supply Hose with ACME Nut and Inverted Male Flare - Thirty Inches Long
With a locking toolbox mounted to your trailer, you can keep your straps, jack, tools, and other gear organized. The gas strut holds the lid open leaving your hands free to grab what you need, and the powder coated aluminum finish resists corrosion.Features: Maximize unused space on your A-frame trailer with this locking toolbox Built-in gas strut assists with opening the lid for one-hand operation Holds lid open while loading and unloading Locking, flush-mounted paddle handle deters theft - 2 keys included Replacement keys available - find the key number on the lock core Weather-resistant EVA seal protects your equipment from rain and debris Mount to your trailer tongue with u-bolts or self tapping screws Hardware not included Specs: External dimensions: 34" long x 18" tall x 14-1/4" wide Capacity: 3.4 cu ft Construction: powder coated aluminum Weight: 15.9 lbs Limited lifetime warranty Note: Shipped in a double thick box with protected corners and gap filler to protect your toolbox
With a locking toolbox mounted to your trailer, you can keep your straps, jack, tools, and other gear organized. The gas strut holds the lid open leaving your hands free to grab what you need, and the powder coated aluminum finish resists corrosion.Features: Maximize unused space on your A-frame trailer with this locking toolbox Built-in gas strut assists with opening the lid for one-hand operation Holds lid open while loading and unloading Locking, flush-mounted paddle handle deters theft - 2 keys included Replacement keys available - find the key number on the lock core Weather-resistant EVA seal protects your equipment from rain and debris Mount to your trailer tongue with u-bolts or self tapping screws Hardware not included Specs: Dimensions: 34" long x 22" tall x 19-1/4" wide Capacity: 6 cu ft Construction: powder coated aluminum Weight: 28.2 lbs Limited lifetime warranty Note: Shipped in a double thick box with protected corners and gap filler to protect your toolbox
Brute toolboxes are built with one-piece, reinforced aluminum diamond tread. They feature a full rubber weather-seal in the self-opening lid, and include a sliding tray and tool holders. ... Features: Constructed of extra thick one-piece aluminum with diamond tread Additional thickness of aluminum reinforcement at stress points throughout the toolbox Polished aluminum finish gives a classic look to your truck bed Gas shocks ensure smooth opening and closing of the beveled lid Lid is self-opening when latch is released and opens almost 90 degrees Full rubber weather seal along the entire lid opening helps keep out dust, dirt, and weather Struts are protected by a full metal shield against damage by tools and equipment in the box Sturdy hinge points ensure smooth alignment of lid opening and closing over time Locking push-button rotary latches Latches on both sides of toolbox allow you to open the box from either side of the truck bed Includes 2 keys Includes a sliding tool tray and level holder as well as a tool caddy on both interior side walls for easy access storage of several screwdrivers or other small tools Quick and easy no-drill installation with included J-hook hardware kit Made in the USA Specs: Overall dimensions: 71" long at the lid x 27" deep x 18" tall Base dimensions: 60" long x 27" deep x 11" tall below the overhang Capacity: approximately 20.0 cu ft Application: most full-size pickup truck beds Limited lifetime warranty [DS] Full Lid Size XOver Xtra Wide Overall Dims: 71x27x18 In.; Base Dims: 60x27x11 In.; Approx.
Get secure storage for your tools and equipment and keep the bed of your truck or trailer open. The gasket keeps mother nature out while the locking drop-down door helps keep the mischievous away. ... Features: Toolbox mounts to the underbody of your truck or trailer to provide secure storage Single drop-down door provides easy access to cargo space Retainer cable keeps door from opening more than 90 degrees Locking, stainless steel T-handle compression latch keeps your equipment safe and secure - keys included Automotive-grade bulb seal protects your gear from mother nature and road spray Heavy-duty 14-gauge steel box with steel doors for jobsite durability Glossy black powder coat finish on box Installs to your truck's underbody with brackets and hardware (not included) Made in the USA Specs: Application: Flatbed trucks, dump trucks, or trailers Overall dimensions: 18" long x 36" wide x 18" tall Capacity: 6.8 cu ft Weight: 76 lbs 1-Year warranty
Brute toolboxes are built with one-piece, reinforced aluminum diamond tread. They feature a full rubber weather-seal in the self-opening lid, and include a sliding tray and tool holders. ... Features: Constructed of extra thick one-piece aluminum with diamond tread Additional thickness of aluminum reinforcement at stress points throughout the toolbox Textured black powder coat finish looks great in your truck bed Low-Profile lid means the toolbox sits lower on the bed rails Gas shocks ensure smooth opening and closing of the beveled lid Lid is self-opening when latch is released and opens almost 90 degrees Full rubber weather seal along the entire lid opening helps keep out dust, dirt, and weather Struts are protected by a full metal shield against damage by tools and equipment in the box Sturdy hinge points ensure smooth alignment of lid opening and closing over time Locking push-button rotary latches Latches on both sides of toolbox allow you to open the box from either side of the truck bed Includes 2 keys Includes a sliding tool tray and level holder as well as a tool caddy on both interior side walls for easy access storage of several screwdrivers or other small tools Quick and easy no-drill installation with included J-hook hardware kit Made in the USA Specs: Overall dimensions: 71" long at the lid x 20" deep x 15.5" tall Base dimensions: 60" long x 20" deep x 11" tall below the overhang Capacity: approximately 12.3 cu ft Application: most full-size pickup truck beds Limited lifetime warranty [DS] Low Profile Full Lid Full Size XOver Standard Overall Dims: 71x20x15.5 In.; Base Dims: 60x20x11 In.; Approx.
Brute toolboxes are built with one-piece, reinforced aluminum diamond tread. They feature a full rubber weather-seal in the self-opening lid, and include a sliding tray and tool holders. ... Features: Constructed of extra thick one-piece aluminum with diamond tread Additional thickness of aluminum reinforcement at stress points throughout the toolbox Polished aluminum finish gives a classic look to your truck bed Gas shocks ensure smooth opening and closing of the beveled lid Lid is self-opening when latch is released and opens almost 90 degrees Full rubber weather seal along the entire lid opening helps keep out dust, dirt, and weather Struts are protected by a full metal shield against damage by tools and equipment in the box Sturdy hinge points ensure smooth alignment of lid opening and closing over time Locking push-button rotary latches Latches on both sides of toolbox allow you to open the box from either side of the truck bed Includes 2 keys Includes a sliding tool tray and level holder as well as a tool caddy on both interior side walls for easy access storage of several screwdrivers or other small tools Quick and easy no-drill installation with included J-hook hardware kit Made in the USA Specs: Overall dimensions: 71-1/2" long at the lid x 28" deep x 23-1/4" tall Base dimensions: 60-1/8" long x 27" deep x 16" tall below the overhang Capacity: approximately 25.5 cu ft Application: most full-size pickup truck beds Limited lifetime warranty
Brute toolboxes are built with one-piece, reinforced aluminum diamond tread. They feature a full rubber weather-seal in the self-opening lid, and include a sliding tray and tool holders. ... Features: Constructed of extra thick one-piece aluminum with diamond tread Additional thickness of aluminum reinforcement at stress points throughout the toolbox Textured black powder coat finish looks great in your truck bed Gas shocks ensure smooth opening and closing of the beveled lid Lid is self-opening when latch is released and opens almost 90 degrees Full rubber weather seal along the entire lid opening helps keep out dust, dirt, and weather Struts are protected by a full metal shield against damage by tools and equipment in the box Sturdy hinge points ensure smooth alignment of lid opening and closing over time Locking push-button rotary latches Latches on both sides of toolbox allow you to open the box from either side of the truck bed Includes 2 keys Includes a sliding tool tray and level holder as well as a tool caddy on both interior side walls for easy access storage of several screwdrivers or other small tools Quick and easy no-drill installation with included J-hook hardware kit Made in the USA Specs: Overall dimensions: 71" long at the lid x 27" deep x 18" tall Base dimensions: 60" long x 27" deep x 11" tall below the overhang Capacity: approximately 20.0 cu ft Application: most full-size pickup truck beds Limited lifetime warranty [DS] Full Lid Full Size XOver XWide Overall Dims: 71x27x18 In.; Base Dims: 60x27x11 In.; Approx.
36-3/4" Long x 14-3/8" wide x 11-3/4" tall; 2.3 cubic feet; Low profile, side-mount toolbox with adjustable legs provides out-of-the-way storage. Insulating foam filled lid and push button lock. Sits 3" above bed rails.Features: Secure, weather-resistant storage unit for your pickup Low profile design sits lower on your bed rail providing a better field of vision RigidCore lid provides exceptional durability while preventing warping and bending Built from extra-thick aluminum plates filled with hardened foam Resists binding while opening and closing and allows gas struts to operate smoothly Gasket runs the length of the entire box and keeps out water, dust, and mud Heavy-duty gas cylinders help to lift lid and hold it open a full 90 degrees Piano hinge runs full length of lid Lockable, push button operation made of rust-resistant stainless steel Space-saving mounting legs provide more flexibility when installing toolbox Pivoting design to mount at any angle to accommodate your truck bed Mounts from 0 to 55 degrees Toolbox can be mounted on driver's side or passenger's side Specs: Dimensions: 36-3/4" long x 14-3/8" wide x 11-3/4" tall Add 1" to above dimensions to allow for lid Capacity: 2.3 cu ft of usable space Construction: 0.058 aluminum tread plate Sits 3" above truck bed rails Lock includes 2 keys Limited lifetime warranty 1-Year finish 1-Year parts
Brute toolboxes are built with one-piece, reinforced aluminum diamond tread. They feature a full rubber weather-seal in the self-opening lid, and include a sliding tray and tool holders. ... Features: Constructed of extra thick one-piece aluminum with diamond tread Additional thickness of aluminum reinforcement at stress points throughout the toolbox Textured black powder coat finish looks great in your truck bed Low-Profile lid means the toolbox sits lower on the bed rails Gas shocks ensure smooth opening and closing of the beveled lid Lid is self-opening when latch is released and opens almost 90 degrees Full rubber weather seal along the entire lid opening helps keep out dust, dirt, and weather Struts are protected by a full metal shield against damage by tools and equipment in the box Sturdy hinge points ensure smooth alignment of lid opening and closing over time Locking push-button rotary latches Latches on both sides of toolbox allow you to open the box from either side of the truck bed Includes 2 keys Includes a sliding tool tray and level holder as well as a tool caddy on both interior side walls for easy access storage of several screwdrivers or other small tools Quick and easy no-drill installation with included J-hook hardware kit Made in the USA Specs: Overall dimensions: 71" long at the lid x 20" deep x 15.5" tall Base dimensions: 60" long x 20" deep x 11" tall below the overhang Capacity: approximately 12.3 cu ft Application: most full-size pickup truck beds Limited lifetime warranty [DS] Low Profile Full Lid Full Size XOver Standard Overall Dims: 71x20x15.5 In.; Base Dims: 60x20x11 In.; Approx.
Get secure storage for your tools and equipment and keep the bed of your truck or trailer open. The gasket keeps mother nature out while the barn door cam lock can be padlocked to keep the mischievous away. ... Features: Toolbox mounts to the underbody of your truck or trailer to provide secure storage Double barn doors provide easy access to cargo space Cam lock rod latch accepts a padlock for security (not included) Automotive-grade bulb seal and built-in rain gutter help protect your gear from mother nature and road spray Heavy-duty smooth aluminum box with stainless steel doors is corrosion resistant Stainless steel bolt-on continuous hinge with oversized 1/4" pin Installs to your truck's underbody with brackets and hardware (not included) Made in the USA Specs: Application: Flatbed trucks, dump trucks, or trailers Overall dimensions: 18" long x 48" wide x 18" tall Capacity: 9 cu ft Weight: 69.83 lbs 1-Year warranty
Get secure storage for your tools and equipment and keep the bed of your truck or trailer open. The gasket keeps mother nature out while the barn door cam lock can be padlocked to keep the mischievous away. ... Features: Toolbox mounts to the underbody of your truck or trailer to provide secure storage Double barn doors provide easy access to cargo space Cam lock rod latch accepts a padlock for security (not included) Automotive-grade bulb seal and built-in rain gutter help protect your gear from mother nature and road spray Heavy-duty smooth aluminum box with aluminum doors is corrosion resistant Stainless steel bolt-on continuous hinge with oversized 1/4" pin Installs to your truck's underbody with brackets and hardware (not included) Made in the USA Specs: Application: Flatbed trucks, dump trucks, or trailers Overall dimensions: 24" long x 60" wide x 18" tall Capacity: 15 cu ft Weight: 84.5 lbs 1-Year warranty
Brute toolboxes are built with one-piece, reinforced aluminum diamond tread. They feature a full rubber weather-seal in the self-opening lid, and include a sliding tray and tool holders. ... Features: Constructed of extra thick one-piece aluminum with diamond tread Additional thickness of aluminum reinforcement at stress points throughout the toolbox Textured black powder coat finish looks great in your truck bed Gas shocks ensure smooth opening and closing of the beveled lid Lid is self-opening when latch is released and opens almost 90 degrees Full rubber weather seal along the entire lid opening helps keep out dust, dirt, and weather Struts are protected by a full metal shield against damage by tools and equipment in the box Sturdy hinge points ensure smooth alignment of lid opening and closing over time Locking push-button rotary latches Latches on both sides of toolbox allow you to open the box from either side of the truck bed Includes 2 keys Includes a sliding tool tray and level holder as well as a tool caddy on both interior side walls for easy access storage of several screwdrivers or other small tools Quick and easy no-drill installation with included J-hook hardware kit Made in the USA Specs: Overall dimensions: 71" long at the lid x 20" deep x 18" tall Base dimensions: 60" long x 20" deep x 11" tall below the overhang Capacity: approximately 14.8 cu ft Application: most full-size pickup truck beds Limited lifetime warranty [DS] Full Lid Full Size XOver Standard Overall Dims: 71x20x18 In.; Base Dims: 60x20x11 In.; Approx.
Brute toolboxes are built with one-piece, reinforced aluminum diamond tread. They feature a full rubber weather-seal in the self-opening lid, and include a sliding tray and tool holders. ... Features: Constructed of extra thick one-piece aluminum with diamond tread Additional thickness of aluminum reinforcement at stress points throughout the toolbox Textured black powder coat finish looks great in your truck bed Gas shocks ensure smooth opening and closing of dual beveled lids Gull-wing style lids are self-opening when latch is released Lids open from the outside and lift towards the center of the box for full access Full rubber weather seal along both lids openings helps keep out dust, dirt, and weather Struts are protected by a full metal shield against damage by tools and equipment in the box Sturdy hinge points ensure smooth alignment of lids opening and closing over time Locking push-button rotary latches Latches on both sides of toolbox allow you to open the box from either side of the truck bed Includes 2 keys Includes a sliding tool tray and level holder as well as a tool caddy on both interior side walls for easy access storage of several screwdrivers or other small tools Quick and easy no-drill installation with included J-hook hardware kit Made in the USA Specs: Overall dimensions: 71" long at the lid x 20" deep x 18" tall Base dimensions: 60" long x 20" deep x 11" tall below the overhang Capacity: approximately 14.8 cu ft Application: most full-size pickup truck beds Limited lifetime warranty [DS] Gull Wing Lid Full Size Standard Overall Dims: 71x20x18 In.; Base Dims: 60x20x11 In.; Approx.
60" Long x 24" wide x 19-1/8" tall. Wide, utility-chest-style toolbox; Brite-Tread aluminum; locking paddle handles; storage space for your belongings in the bed of your full-size truck with fifth-wheel trailer hitch installed.This toolbox is ideal for storage behind the cab or at the tail end of your truck bed when you have a fifth-wheel trailer hitch installed. If you're towing a fifth-wheel trailer and want to maximize the storage capacity of your truck bed, this toolbox is for you.
30" Long x 14-1/2" tall x 14-1/2" wide locking toolbox mounts to an A-frame trailer tongue to provide secure storage. Gas strut helps lift and hold lid. Weatherproof neoprene seal keeps your gear dry. ... Features: Toolbox mounts to your A-Frame trailer tongue to provide secure storage Built-in gas strut assists with opening the lid Holds lid open while loading and unloading Locking, flush-mounted paddle handle keeps your gear safe and secure - keys included Weatherproof neoprene seal protects your equipment from the elements Durable, corrosion-resistant Brite-Tread aluminum and stainless steel construction Quick and easy installation - just mount on your trailer tongue Hardware not included Made in the USA Specs: Overall dimensions: 30" long x 14-1/2" tall x 14-1/2" wide 18" long (front) Capacity: 2.6 cu ft Weight: 27 lbs 1-Year warranty
Filters
