Easily replace a damaged seat or cracked lid on your part-timer Dometic RV toilet with this bolt-on seat assembly. Wooden seat is sturdy and retains heat. Slow-close lid quietly closes without slamming against the rim of the toilet bowl.Features: Toilet seat and lid replace the seat and lid that came with your Dometic RV toilet 310 Series Part-Timer 9108923942 (DOM37FR), 9108923944 (DOM47FR). 9108923946 (DOM77FR) Wooden seat is comfortable and retains heat, even in the cold Slow-close lid quietly closes without slamming against the bowl Simple installation - bolt mounting base onto your RV toilet's bowl and attach seat hinges Mounting hardware included Bone tan color Made in the USA Specs: Total length: 15-1/2" Seat cutout dimensions: 11" long x 8" wide Mounting point spread (center on center): 5-1/2"
Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 1-1/4" to 2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-1/4" to 2" thick rails
Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 1-1/4" to 2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-1/4" to 2" thick rails
Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 3/8" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 3/8"
Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 3/4" to 1-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 3/4" to 1-1/2" thick rails
Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 3/4" to 1-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 3/4" to 1-1/2" thick rails
Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 1-3/4" to 2-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-3/4" to 2-1/2" thick rails
Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 1-3/4" to 2-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-3/4" to 2-1/2" thick rails
Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 2" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 2"
Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 1" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 1"
Replaces the spine for your Yakima Plus 2 2-bike add-on (Y02446) for Yakima HoldUp bike racks.Features: Replaces the spine for your Yakima Plus 2 2-bike add-on (Y02446) for Yakima HoldUp bike racks Mounting hardware (Y8880128) is sold separately Quantity: 1 spine Fits: Part number Y02446 , Yakima Plus 2 2-bike add-on for Yakima HoldUp bike racks
Your bikes are built to turn heads, and so is the StageTwo. Sleek, modern, and built tough, it keeps your e-bikes and big trail machines locked in tight and wobble-free. Focus on the ride ahead and let the rack handle the rough road to the trail.It starts as a four-bike rack, but when you don't need the extra capacity, just pop off the front section with the included Allen key, stash it at home or in your trunk, and swap the handle. Now, it's a lean, mean two-bike setup - no extra parts, no complicated conversions. Upgrade Your Ride with These Add-Ons The StageTwo gets the job done on its own, but a couple key add-ons (each sold separately) can make your life easier and take your setup to the next level: Hoisting heavy e-bikes or fat bikes isn't for everyone.
Your bikes are built to turn heads, and so is the StageTwo. Sleek, modern, and built tough, it keeps your e-bikes and big trail machines locked in tight and wobble-free. Focus on the ride ahead and let the rack handle the rough road to the trail.It starts as a four-bike rack, but when you don't need the extra capacity, just pop off the front section with the included Allen key, stash it at home or in your trunk, and swap the handle. Now, it's a lean, mean two-bike setup - no extra parts, no complicated conversions. Upgrade Your Ride with These Add-Ons The StageTwo gets the job done on its own, but a couple key add-ons (each sold separately) can make your life easier and take your setup to the next level: Hoisting heavy e-bikes or fat bikes isn't for everyone.
This 2-bike rack has an integrated ramp that lets you easily roll your heavy electric bikes up and onto the trays - no lifting required. When you're done simply remove the ramp and store it onboard. Tilts with bikes loaded for cargo area access.Features: Platform bike rack carries 2 e-bikes using your vehicle's hitch receiver Integrated ramp lets you easily roll heavy bikes onto the rack Stores behind bike trays when not in use - no storage issues or risk of loss Padded clamps with ratcheting straps hold bikes securely by the frame or seat post Sliding wheel straps let you carry bikes with different wheelbases Adjustable trays slide side-to-side for optimal bike spacing - no tools required Rear-mounted spring pin lets you tilt and fold the rack Tilts with bikes loaded to access cargo area Anti-rattle hitch pin reduces movement of rack in hitch receiver Same Key System (SKS) locks deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 2 bikes Weight capacity: 80 lbs per bike Off-road rated: 48 lbs per bike RV rated: 80 lbs per bike Maximum tire width: 5" Maximum wheelbase: 54" Wheel diameter: up to 29" Maximum ramp length: 51" Distance from center of hitch pin hole to: Farthest part of rack when folded up: 12" Farthest part of rack when folded down: 30-1/2" Closest part of rack when folded up: 6" Closest part of rack when folded down: 10-3/4" Carrier weight: 53.5 lbs Limited lifetime warranty
Your bikes need a rack that looks just as good as they do. The StageTwo's sleek, modern design fits right in with your vehicle, built for both style and strength. It holds your bikes steady, giving them a secure ride through every bump and turn.Specs Vehicle & RV Compatibility: Application: 2" Trailer hitch receivers Capacity: Bikes: 2 Weight capacity: 70 lbs per bike RV: 60 lbs per bike Off-road: 42 lbs per bike Maximum tire width: 5" Maximum wheelbase: 52" Maximum wheel diameter: 29" Dimensions and weight: Distance from center of hitch pin hole to: Closest part of rack: 5-1/2" Farthest part of bike rack when folded down: 41-1/2" Farthest part of bike rack when folded up: 15" Weight: 64 lbs Color & Construction: Black powder coated steel Made in the USA Warranty: Limited lifetime
Your bikes need a rack that looks just as good as they do. The StageTwo's sleek, modern design fits right in with your vehicle, built for both style and strength. It holds your bikes steady, giving them a secure ride through every bump and turn.Specs Vehicle & RV Compatibility: Application: 2" Trailer hitch receivers Capacity: Bikes: 2 Weight capacity: 70 lbs per bike RV: 60 lbs per bike Off-road: 42 lbs per bike Maximum tire width: 5" Maximum wheelbase: 52" Maximum wheel diameter: 29" Dimensions and weight: Distance from center of hitch pin hole to: Closest part of rack: 5-1/2" Farthest part of bike rack when folded down: 41-1/2" Farthest part of bike rack when folded up: 15" Weight: 64 lbs Color & Construction: Black powder coated steel Made in the USA Warranty: Limited lifetime
This rack swings away from the rear of your vehicle with bikes loaded for full cargo area access. Adjustable cradles slide along the arms to best fit each bike. Removable ZipStrips let you load bikes without bulky straps interfering.Features: Hanging bike rack carries 4 bikes using your vehicle's hitch receiver Hinged arm at base swings rack 180 degrees for full access to your cargo area Provides extra clearance for SUVs, Jeeps, and vans with large doors Anti-sway cradles with soft padding secure bikes by the top tube and seat post Removable ZipStrips allow bike frames to easily slide over cradles Lower cradles reduce bike-to-bike contact and help prevent scratches and scuffs TriggerFinger levers allow rack to tilt and arms to fold Mast tilts down without bikes loaded to access cargo area Tool-free installation with SpeedKnob and integrated hitch pin Tightens rack inside your hitch to reduce movement and noise Same Key System (SKS) locks deter theft of your bikes and the rack Frame adapter bar (sold separately) required for bikes without a straight, horizontal top tube Black powder coated steel construction is rust resistant Specs: Application: 2" x 2" trailer hitch receivers Carrying capacity: 4 bikes Weight capacity: 150 lbs Per bike: 40 lbs Length of arms: 25" Cradle width: 1-3/4" Distance between arms (outside cradle to outside cradle): 12-1/2" Distance from center of hitch pin hole to: Closest part of rack: 9" Back of upright mast when arm is closed: 15" Farthest part of rack: 36" Carrier weight: 56 lbs Limited lifetime warranty Swings Away for Cargo Area Access The Yakima FullSwing has a hinged arm that swings 180 degrees away from the hitch with your bikes loaded.
Your bikes need a rack that looks just as good as they do. The StageTwo's sleek, modern design fits right in with your vehicle, built for both style and strength. It holds your bikes steady, giving them a secure ride through every bump and turn.Specs Vehicle & RV Compatibility: Application: 1-1/4" (Class 2 only) Trailer hitch receivers Capacity: Bikes: 2 Weight capacity: 60 lbs per bike Off-road: 30 lbs per bike Maximum tire width: 5" Maximum wheelbase: 52" Maximum wheel diameter: 29" Dimensions and weight: Distance from center of hitch pin hole to: Closest part of rack: 5-1/2" Farthest part of bike rack when folded down: 41-1/2" Farthest part of bike rack when folded up: 15" Weight: 64 lbs Color & Construction: Black powder coated steel Made in the USA Warranty: Limited lifetime
This 2-bike rack has an integrated ramp that lets you easily roll your heavy electric bikes up and onto the trays - no lifting required. When you're done simply remove the ramp and store it onboard. Tilts with bikes loaded for cargo area access.Features: Platform bike rack carries 2 e-bikes using your vehicle's hitch receiver Integrated ramp lets you easily roll heavy bikes onto the rack Stores behind bike trays when not in use - no storage issues or risk of loss Padded clamps with ratcheting straps hold bikes securely by the frame or seat post Sliding wheel straps let you carry bikes with different wheelbases Adjustable trays slide side-to-side for optimal bike spacing - no tools required Rear-mounted spring pin lets you tilt and fold the rack Tilts with bikes loaded to access cargo area Anti-rattle hitch pin reduces movement of rack in hitch receiver Same Key System (SKS) locks deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Specs: Application: 1-1/4" x 1-1/4" (Class II) trailer hitch receivers Carrying capacity: 2 bikes Weight capacity: 70 lbs per bike Off-road and RV rated: 42 lbs per bike Maximum tire width: 3.25" Maximum wheelbase: 50" Wheel diameter: 20" - 29" Wheel cradle strap length: 10" Maximum ramp length: 51" Distance from center of hitch pin hole to: Closest part of rack when folded up: 5" Farthest part of rack when folded up: 15-1/2" Farthest part of rack when folded down: 32" Carrier weight: 53.5 lbs Limited lifetime warranty
6-Bike carrier is great for large families and tour operators alike. You can load mountain bikes, road bikes, kid's bikes, and other bike styles and secure them vertically by the handlebars. Tilts with bikes unloaded to access cargo area.Features: Vertical bike rack carries 6 bikes using your vehicle's hitch receiver Great for families and tour operators Accommodates mountain bikes, road bikes, kid's bikes, BMX bikes, fat bikes, and lighter e-bikes Padded cradles with adjustable chain straps secure bikes by the handlebar DH cradle (sold separately) lets you carry a bike with a dual-crown suspension fork Rotating wheel cups accommodate most wheel sizes, including fat bike tires Ratcheting straps secure your bikes' rear wheels in place Spring-loaded foot pedal lets you use 2 hands to tilt the rack Tilts with bikes unloaded to access cargo area 2 Height settings ensure proper ground clearance for bikes' rear tires Anti-rattle hitch pin with SKS lock secures the rack to your vehicle and eliminates movement in the hitch Integrated lock loop lets you add a cable lock (sold separately) to secure your bikes to the rack Black powder coated steel construction is durable and rust resistant Specs: Application: 2" x 2" trailer hitch receivers Minimum tongue weight: 500 lbs Weight capacity (on road): 70 lbs per bike (inner 2 positions) 37.5 lbs per bike (outer 4 positions) Weight capacity (off-road): 42 lbs per bike (inner 2 positions) 22.5 lbs per bike (outer 4 positions) Minimum ground clearance: 10" Maximum tire width: 5" Wheelbase: 24" - 50" Distance between bicycles: 12" Distance from center of hitch pin hole to: Closest part of rack: 8-3/4" Farthest part of rack: 20" Crossbar length: 46" Carrier weight: 85 lbs Limited lifetime warranty Note: Vertical Orientation Unlike a platform-style rack that requires you to load and unload your bikes in a specific order, the vertical orientation of the Yakima HangTight allows you to add and remove your bikes in any order.
Modular platform bike rack swings away with bikes loaded for cargo area access. Swap the bike rack for a ski carrier or cargo carrier without removing the base from your vehicle, or add a 2nd tier to carry 2 accessories (all sold separately).Features: Modular platform bike rack carries 2 bikes using your vehicle's hitch receiver Swap the bike rack for a ski carrier or cargo carrier (sold separately) to match your outdoor adventure Add 2nd Tier and accessory (sold separately) to carry all your biking, camping, or skiing gear Swing-away design allows you to access your rear cargo area without removing bikes from rack Hinged arm at base swings rack out and away from the rear of your vehicle Ratcheting hooks hold your bikes securely by the front wheels Large wheel holders with extra-long straps let you carry fat bikes Pivoting rear-wheel cradles accommodate bikes of different lengths Cleat system and SpeedKnobs allow bike rack to be removed from base without tools Same Key System (SKS) locks deter theft of system and bikes Cores can be swapped out to match your other Yakima accessories Anti-rattle hitch pin reduces movement of rack in hitch receiver Powder coated steel bike rack and base are rust resistant Specs: Application: 2" x 2" hitch receivers Carrying capacity: 2 bikes Weight capacity: 50 lbs per bike Wheel sizes: 20" - 29" Maximum tire width: 4.8" Bike rack dimensions: 26-5/8" long x 72" wide x 7" tall Distance from center of hitch pin hole to: Closest part of rack: 4-1/4" Farthest part of rack: 35-1/2" Total system weight: 106 lbs Bike rack weight: 37 lbs Limited lifetime warranty Notes: The EXO System is only approved for use with the Yakima StraightShot 2" hitch extender (Y69VR - sold separately).
Replaces a missing or damaged barrel nut on the mounting hardware for your Yakima SkyBox rooftop box with this equivalent part.Features: Replaces a missing or damaged barrel nut on the mounting hardware for your Yakima SkyBox rooftop box with this equivalent part Fits Yakima SkyBoxes (Y07198, Y07186, Y07178, Y07175, Y07180, Y07184) Includes 1 barrel nut
This EXO system is perfect for your biking adventure. Bike rack secures your bikes by the wheels, and the enclosed cargo carrier detaches so you can carry your gear to the campsite in a single trip. System swings away to provide cargo area access.However, they can be swapped out to match each other and even your other Yakima gear. EXO System Accessories Because the EXO System is modular you can add accessories for whatever adventure you have planned, or swap them out for other activities.
This EXO system is perfect for your mountain getaway. Ski carrier secures 5 pairs of skis or 4 snowboards, and enclosed cargo carrier holds clothes and ski gear. System swings away to provide cargo area access.However, they can be swapped out to match each other and even your other Yakima gear. EXO System Accessories Because the EXO System is modular you can add accessories for whatever adventure you have planned, or swap them out for other activities.
Filters
