This steel D-ring tie-down kit gives you a strong, secure anchor point for hauling cargo without getting in the way. The flush-mount design sits low to prevent interference, and each pack includes 2 rings with mounting hardware.Features: Steel D-ring tie-down kit provides a secure anchor point for hauling cargo Flush-mount design sits low so it does not interfere with your cargo 5,000-lb Rating supports heavy-duty tie-down applications Zinc-plated finish helps resist corrosion Stainless steel hardware and galvanized backer plates are included for installation 2 D-rings are included per pack Specs: Quantity: 2 D-rings Rating: 5,000 lbs Construction: Material: Steel Finish: Zinc plated Hardware: Stainless steel Backer plates: Galvanized
Some loads need more than a light tie-down point. This ProGrip weld-on D-ring adds a permanent place to hook straps or chains so you can cinch heavy cargo down and roll out knowing the connection point is not going anywhere.Works With Common Tie-Down Gear: Compatible with straps, chains, and hooks. Welds Directly To Your Trailer: Installation creates a secure anchor that will not shift under load. Single D-Ring Anchor: Sold individually so you can place anchors exactly where you need them.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. The curved D-ring gives hooks and straps more room to seat, so you can cinch down hard without fighting a flat ring.Highlights 15,600-lb Working Load Limit for Heavy-Duty Cargo Control: A solid capacity for equipment trailers, flatbeds, and haulers that see big loads. Curved D-Ring Helps Your Hook and Strap Sit Cleaner on the Anchor Point: The bend gives your tie-down hardware more room to seat instead of fighting a flat ring.
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Mount D-ring to surface of bed or remove the plastic gasket for recessed mount. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 2 Mounting options Surface mounting doesn't require you to cut a hole in your trailer or truck bed Recessed mounting helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Removable plastic gasket helps to create a seal against dirt and water when D-ring is surface mounted Also reduces corrosion and oxidation Backing plate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface For recessed mount, cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backing plate attaches directly under D-ring anchor and on the opposite side of the mounting surface 2 Nuts, 2 lock washers, and (2) 1/4" x 2-1/4" bolts included Specs: Maximum load (break strength): 800 lbs Safe working load limit (WLL): 265 lbs Anchor: Base diameter: 4" Recess: 1/4" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
These sturdy steel D-rings create stable tie-down points in your trailer or truck bed. Recessed D-rings swivel 360 degrees for versatile tie-down positioning. ... Features: D-ring anchors provide tie-down points in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 360-Degree swivel lets you rotate D-rings so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-rings from interfering as you roll cargo into and out of your trailer or truck bed Backing plates reinforce the surface of your trailer where the tie-downs attach Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backing plates attach directly under D-ring anchors and on the opposite side of the mounting surface 16 Nuts, 16 lock washers, and (16) 5/16" x 2-1/4" bolts included Specs: Maximum load (break strength): 6,000 lbs per D-ring Safe working load limit (WLL): 2,000 lbs per D-ring Anchor dimensions: Base diameter: 6-5/16" Recess: 7/8" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6-1/2" wide x 1/8" thick Quantity: 4 D-rings Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Backing plate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a 3" diameter hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backing plate attaches directly under D-ring anchor and on the opposite side of the mounting surface 3 Nuts, 3 lock washers, and (3) 1/4" x 2-1/4" bolts included Specs: Maximum load (break strength): 1,200 lbs Safe working load limit (WLL): 400 lbs Anchor: Base dimensions: 5" long x 3-9/16" wide Recess: 5/16" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Surface mount doesn't require that you cut a hole in your trailer or truck bed. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Surface-mount design doesn't require you to cut a hole in your trailer or truck bed Backing plate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Simple, bolt-on installation on flat surface Backing plate attaches directly under D-ring anchor and on the opposite side of the mounting surface 2 Nuts, 2 lock washers, and (2) 1/4" x 2-1/4" bolts included Specs: Maximum load (break strength): 800 lbs Safe working load limit (WLL): 265 lbs Anchor: Base diameter: 4" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy D-ring serves as an attachment point for tie-down straps and bungee cords wherever you need cargo control. The recessed design allows you to roll cargo over the ring and is zinc-plated for corrosion resistance. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) 360-Degree swivel lets you rotate D-ring so you can easily attach straps from any angle Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Backing plate reinforces the surface of your trailer where the tie-down is attached Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Cut a hole in your trailer or truck bed for the recessed portion of the D-ring to sit inside Backing plate attaches directly under D-ring anchor and on the opposite side of the mounting surface 4 Nuts, 4 lock washers, and (4) 5/16" x 2-1/4" bolts included Specs: Maximum load (break strength): 6,000 lbs Safe working load limit (WLL): 2,000 lbs Anchor: Base diameter: 6-5/16" Recess: 7/8" D-ring thickness: 1/4" Backing plate dimensions: 6-1/2" long x 6-1/2" wide x 1/8" thick Limited 1-year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Bolt a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and bolt-on clip give straps, chain, and hooks a solid place to connect, so you spend less time re-hooking and repositioning tie-downs.Highlights 4,000-lb Working Load Limit for Cargo Control: A solid capacity for utility trailers, haulers, and tie-down upgrades. Bolt-On Clip and D-Ring Let You Add a Tie-Down Point Where You Need It: Place it where your straps or chain pull straight to help reduce off-angle pulls.
Weld on a heavy-duty tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down hard without reworking tie-downs.Highlights 8,833-lb Working Load Limit for Heavy-Duty Cargo Control: A solid capacity for equipment trailers, flatbeds, and haulers that see big loads. Weld-On Clip and D-Ring Let You Add a Tie-Down Point Where You Need It: Place it where your straps or chain pull straight to help reduce off-angle pulls.
Add an extra anchor point on your truck, utility trailer or enclosed cargo trailer with this 1" diameter heavy duty D-ring. Weld the bracket to a flat, steel surface. Perfect for securing your equipment, tractors, and other heavy cargo.Features: Heavy-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or chains Lets you anchor equipment or other heavy cargo on your truck, utility trailer, or enclosed cargo trailer Extended-length ring accommodates large diameter ropes, hooks and chains D-ring rotates 180 degrees so you can attach from multiple angles Forged steel construction is more resistant to wear and deformation than standard steel Weld-on installation to most flat, steel surfaces Specs: Safe working load limit (WLL): 15,600 lbs D-ring dimensions: Thickness: 1" Inner dimensions: 3-1/8" wide x 3" long Overall width: 5" Mounting bracket dimensions: 2-1/2" long x 2" wide 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This forged steel D-ring lets you add an extra anchor point on your truck, utility trailer or enclosed cargo trailer. Welds to flat, steel surfaces. Perfect for securing ATVs, UTVs, riding mowers, and other heavy cargo.Features: Standard-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or bungees Lets you anchor ATVs, UTVs, riding mowers, and other heavy cargo on your truck, utility trailer or enclosed cargo trailerD-ring rotates 180 degrees so you can attach your rope, strap or bungee from multiple angles Forged steel construction is more resistant to wear and deforming than standard steel Weld-on installation to most flat, steel surfaces Specs: Maximum load (break strength): 12,000 lbs Safe working load limit (WLL): 4,000 lbs D-ring dimensions: Thickness: 1/2" Inner dimensions: 2-3/8" wide x 2-1/2" long Overall width: 3-3/8" Mounting bracket dimensions: 1-3/4" long x 1-3/4" wide 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This anchor has a sleeve that mounts under the D-ring to help prevent it from rattling when not in use. It lets you add an extra anchor point on your truck, utility trailer or enclosed cargo trailer to secure ATVs, UTVs, and other heavy cargo.Features: Heavy-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or bungees Lets you anchor ATVs, UTVs, and other heavy cargo on your truck, utility trailer or enclosed cargo trailer Sleeve under D-ring keeps anchor tight and helps prevent rattling D-ring rotates 180 degrees so you can attach your rope, strap or bungee from multiple angles Steel construction with yellow-zinc plating is strong and corrosion resistant Bolt-on installation to most flat, solid surfaces Mounting hardware not included Specs: Maximum load (break strength): 11,000 lbs Safe working load limit (WLL): 3,666 lbs D-ring dimensions: Thickness: 1/2" Inner dimensions: 2-1/4" wide x 2-3/16" long Overall width: 3-1/4" Mounting bracket dimensions: 3-1/8" long x 1-3/4" wide Distance between mounting holes (center to center): 2" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This D-ring lets you add a removable anchor point on your truck bed, utility trailer or enclosed cargo trailer. Just pull pin to remove ring from base when not in use. ... Features: Standard-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or bungees Lets you anchor ATVs, UTVs, and other heavy cargo on your truck, utility trailer or enclosed cargo trailer Removable design - simply pull out clevis pin to remove D-ring from anchor base Removing anchor eliminates rattling of unused D-ring during transport D-ring rotates 180 degrees so you can attach your rope, strap or bungee from multiple angles Steel construction with yellow-zinc plating is strong and corrosion resistant Bolt-on installation to most flat, solid surfaces Mounting hardware not included Specs: Maximum load (break strength): 11,000 lbs Safe working load limit (WLL): 3,666 lbs D-ring dimensions: Thickness: 1/2" Inner dimensions: 2-3/8" wide x 2-5/8" long Overall width: 3-3/8" Mounting bracket dimensions: 3-3/8" long x 1-3/4" wide Distance between mounting holes (center to center): 2" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This heavy-duty, forged steel D-ring lets you add an extra anchor point on your truck, utility trailer or enclosed cargo trailer. Welds to flat, steel surfaces. Perfect for securing trucks, tractors, and other heavy cargo.Features: Heavy-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or chains Lets you anchor trucks, tractors, and other heavy cargo on your truck, utility trailer or enclosed cargo trailerD-ring rotates 180 degrees so you can attach your rope, strap or chain from multiple angles Forged steel construction is more resistant to wear and deforming than standard steel Weld-on installation to most flat, steel surfaces Specs: Maximum load (break strength): 45,000 lbs Safe working load limit (WLL): 15,000 lbs D-ring dimensions: Thickness: 1" Inner dimensions: 3" wide x 3" long Overall width: 5" Mounting bracket dimensions: 2-1/2" long x 2-1/2" wide 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This D-ring lets you add an extra anchor point on your truck, utility trailer or enclosed cargo trailer. Bolts to most flat, solid surfaces. ... Features: Standard-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or bungees Lets you anchor ATVs, UTVs, riding mowers, and other heavy cargo on your truck, utility trailer or enclosed cargo trailerD-ring rotates 180 degrees so you can attach your rope, strap or bungee from multiple angles Steel construction with yellow-zinc plating is strong and corrosion resistant Bolt-on installation to most flat, solid surfaces Mounting hardware not included Specs: Maximum load (break strength): 11,000 lbs Safe working load limit (WLL): 3,667 lbs D-ring dimensions: Thickness: 1/2" Inner diameter: 2-3/8" wide x 2-5/16" long Overall width: 3-3/8" Mounting bracket dimensions: 3-3/16" long x 1-3/4" wide Distance between mounting holes (center to center): 2" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This forged steel D-ring lets you add an extra anchor point on your trailer, truck, or enclosed trailer. Welds to flat, steel surfaces. Perfect for securing ATVs, UTVs, riding mowers, and other heavy cargo.Features: Standard-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or bungees Lets you anchor ATVs, UTVs, riding mowers, and other heavy cargo on your truck, utility trailer or enclosed cargo trailer Extended-length ring accommodates large diameter ropes and chains D-ring rotates 180 degrees so you can attach your rope, strap or bungee from multiple angles Forged steel construction is more resistant to wear and deforming than standard steel Weld-on installation to most flat, steel surfaces Specs: Maximum load (break strength): 11,000 lbs Safe working load limit (WLL): 3,666 lbs D-ring dimensions: Thickness: 1/2" Inner dimensions: 2-1/2" wide x 4-1/2" long Overall width: 3-1/2" Mounting bracket dimensions: 2-1/8" long x 1-3/8" wide 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This D-ring lets you add a removable anchor point on your truck bed, utility trailer or enclosed cargo trailer. Just pull pin to remove ring from base when not in use. ... Features: Light-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or bungees Lets you anchor push mowers, tillers, and other lightweight cargo on your truck, utility trailer or enclosed cargo trailer Removable design - simply pull out clevis pin to remove D-ring from anchor base Removing anchor eliminates rattling of unused D-ring during transport D-ring rotates 180 degrees so you can attach your rope, strap or bungee from multiple angles Steel construction with yellow-zinc plating is strong and corrosion resistant Bolt-on installation to most flat, solid surfaces Mounting hardware not included Specs: Maximum load (break strength): 2,400 lbs Safe working load limit (WLL): 800 lbs D-ring dimensions: Thickness: 1/4" Inner dimensions: 1" wide x 1-3/16" long Overall width: 1-11/16" Mounting bracket dimensions: 2-1/8" long x 3/4" wide Distance between mounting holes (center to center): 1-7/16" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This D-ring lets you add a removable anchor point on your truck bed, utility trailer or enclosed cargo trailer. Just pull pin to remove ring from base when not in use. ... Features: Standard-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or bungees Lets you anchor ATVs, UTVs, and other heavy cargo on your truck, utility trailer or enclosed cargo trailer Removable design - simply pull out clevis pin to remove D-ring from anchor base Removing anchor eliminates rattling of unused D-ring during transport D-ring rotates 180 degrees so you can attach your rope, strap or bungee from multiple angles Steel construction with yellow-zinc plating is strong and corrosion resistant Bolt-on installation to most flat, solid surfaces Mounting hardware not included Specs: Maximum load (break strength): 5,000 lbs Safe working load limit (WLL): 1,667 lbs D-ring dimensions: Thickness: 3/8" Inner dimensions: 1-1/4" wide x 1-3/16" long Overall width: 1-7/8" Mounting bracket dimensions: 3-11/16" long x 1-3/16" wide Distance between mounting holes (center to center): 2-1/2" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This forged steel D-ring lets you add an extra anchor point on your truck, utility trailer or enclosed cargo trailer. Bolts to most flat, solid surfaces. ... Features: Standard-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or bungees Lets you anchor ATVs, UTVs, riding mowers, and other heavy cargo on your truck, utility trailer or enclosed cargo trailerD-ring rotates 180 degrees so you can attach your rope, strap or bungee from multiple angles Forged steel construction is more resistant to wear and deforming than standard steel Bolt-on installation to most flat, solid surfaces Mounting hardware not included Specs: Maximum load (break strength): 11,000 lbs Safe working load limit (WLL): 3,666 lbs D-ring dimensions: Thickness: 1/2" Inner dimensions: 2-3/8" wide x 2-1/2" long Overall width: 3-3/8" Mounting bracket dimensions: 3-3/8" long x 1-3/4" wide Distance between mounting holes (center to center): 2" 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This heavy-duty, forged steel D-ring lets you add an extra anchor point on your truck, utility trailer or enclosed cargo trailer. Welds to flat, steel surfaces. Perfect for securing vehicles, tractors, and other heavy cargo.Features: Heavy-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or chains Lets you anchor vehicles, tractors, and other heavy cargo on your truck, utility trailer or enclosed cargo trailer Extended-length ring accommodates large diameter ropes and chains D-ring rotates 180 degrees so you can attach your rope, strap or chain from multiple angles Forged steel construction is more resistant to wear and deforming than standard steel Weld-on installation to most flat, steel surfaces Specs: Maximum load (break strength): 45,000 lbs Safe working load limit (WLL): 15,000 lbs D-ring dimensions: Thickness: 1" Inner dimensions: 3" wide x 4" long Overall width: 5" Mounting bracket dimensions: 2-1/2" long x 2-1/2" wide 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Add an extra anchor point on your truck, utility trailer or enclosed cargo trailer with this 5/8" diameter medium duty D-ring. Weld the bracket to a flat, steel surface. Perfect for securing your equipment, tractors, and other cargo.Features: Heavy-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or chains Lets you anchor equipment or other heavy cargo on your truck, utility trailer, or enclosed cargo trailer Extended-length ring accommodates large diameter ropes, hooks and chains D-ring rotates 180 degrees so you can attach from multiple angles Forged steel construction is more resistant to wear and deformation than standard steel Weld-on installation to most flat, steel surfaces Specs: Safe working load limit (WLL): 6,300 lbs D-ring dimensions: Thickness: 5/8" Inner dimensions: 3" wide x 3" long Overall width: 4-58" Mounting bracket dimensions: 2-1/2" long x 2" wide 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This standard-duty, forged steel D-ring lets you add an extra anchor point on your truck, utility trailer or enclosed cargo trailer. Welds to flat, steel surfaces. Perfect for securing cars, ATVs, riding mowers, and other heavy cargo.Features: Standard-duty D-ring tie-down anchor provides a solid attachment point for ropes, straps or chains Lets you anchor cars, ATVs, riding mowers, and other heavy cargo on your truck, utility trailer or enclosed cargo trailerD-ring rotates 180 degrees so you can attach your rope, strap or chain from multiple angles Forged steel construction is more resistant to wear and deforming than standard steel Weld-on installation to most flat, steel surfaces Specs: Maximum load (break strength): 15,000 lbs Safe working load limit (WLL): 5,000 lbs D-ring dimensions: Thickness: 5/8" Inner dimensions: 3" wide x 3" long Overall width: 4-1/4" Mounting bracket dimensions: 2-1/2" long x 1-7/8" wide 1-Year limited warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
This sturdy steel D-ring creates a stable tie-down point in your trailer or truck bed. Recessed design lets you roll cargo over the D-ring without interference. ... Features: D-ring anchor provides tie-down point in your utility trailer or truck bed Perfect for securing a rope, cargo net, bungee cord, or ratchet strap (sold separately) Recessed, low-profile design helps prevent D-ring from interfering as you roll cargo in and out of your trailer or truck bed Zinc-plated steel resists rust and corrosion Bolt-on installation on flat surface Hardware not included Specs: Maximum load (break strength): 1,200 lbs Safe working load limit (WLL): 400 lbs Base dimensions: 5" long x 3-9/16" wide Recess: 5/16" D-ring thickness: 1/4" Fastener hole diameter: 5/16" 1-Year warranty Note: Tie-down anchors must be chosen according to their safe working load limit (WLL).
Filters
