Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).Features: Bunk-board kit lets you create 2 guide-ons to support your boat and keep it centered while you're loading it onto your trailer 2x4 Lumber for bunk boards not included 90-Degree-angled tubes let you mount the bunks close to your boat Great for narrow boats Bolt-on installation - clamp onto top or bottom of your trailer's frame Pre-galvanized steel construction is sturdy and corrosion-resistant Marine-grade carpeting lines bunk boards to protect your boat's finish 2 Rolls included to cover 2 boards U-bolts, brackets, and mounting hardware included Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/2" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) are required to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Carpeting dimensions (per roll): 11" wide x 12' long Maximum 2x4 length for carpeting: 69" Pre-Galvanized Steel Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. Fits trailer frames up to 3" wide x 4-1/4" tall. ... Features: Bunk-style guides support your pontoon boat and keep it centered while you're loading it onto your trailer Adjustable height provides a good fit for your boat Boards can be installed higher or lower along the posts Support posts clamp onto the top of your channel, box-beam, or I-beam trailer frame Mounting brackets allow you to adjust the distance between posts Galvanized steel construction is sturdy and resists corrosion Hardware included Marine-grade-carpeted boards won't scratch your boat Made in the USA Specs: Quantity: 2 bunk-style pontoon boat guides Application: pontoon boat trailer frames up to 3" wide x 4-1/4" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) can be used to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Bunk board dimensions (each): 24" long x 4" wide x 2" deep Post dimensions: 23" tall x 1-1/2" wide Mounting area is 9-1/2" long Adjustable boat guides can be fine-tuned to work with your boat and your trailer.
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.The pre-galvanized steel support posts mount horizontally on top of or below your trailer's frame rail. Just slide the posts into the boat guide supports and secure the posts so that the distance between the bunks correctly matches the width of your boat.
Get better visibility for launching and loading your boat with these post extensions. Slide extensions into the top of your existing bunk-style guide-ons and secure with included hardware. Adjustable posts give you up to 37" of added height.Easy Installation with Included Hardware You don't have to be a boating expert to install these post extensions for bunk-style guide-ons. All you need is some tools, a friend, and a little bit of patience. Remove the bunk from your existing guide-on - the rest of the guide-on can remain on your boat trailer Slide the PVC pipe onto the top of the steel upright Slide the assembled post extension into the opening of the guide-on After you've slid the post into the opening, you'll need to choose how tall you want your guideposts.
Loading your boat shouldn't feel like a guessing game. These bunk board guide-ons help keep everything lined up and supported as you pull in or launch. With adjustable mounting, they're built to fit your trailer and handle life on the water.Features: Bunk board guide-ons provide reliable boat alignment and support during loading and unloading 2x4 Black carpeted bunk boards help guide the boat onto the trailer Adjustable posts allow mounting 5-11" on the side of the frame or 19" high when mounted above the frame Corrosion-resistant hardware includes zinc-plated U-bolts and nuts with galvanized mounting hardware Trailer frame compatibility fits frames 2-3" wide and up to 4" high Complete kit sold in pairs with all mounting hardware included Made in the USA Specs: Overall length: 2' Frame fit: 2-3" wide x up to 4" high Quantity: 2 guide-ons Color: black/silver Weight: 20.34 lbs
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Features to Know About Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade. It holds up better than carpet and makes loading and unloading easier.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Features to Know About Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade. It holds up better than carpet and makes loading and unloading easier.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Features to Know About Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade. It holds up better than carpet and makes loading and unloading easier.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Features to Know About Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade. It holds up better than carpet and makes loading and unloading easier.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Features to Know About Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade. It holds up better than carpet and makes loading and unloading easier.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Features to Know About Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade. It holds up better than carpet and makes loading and unloading easier.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Features to Know About Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade. It holds up better than carpet and makes loading and unloading easier.
Give your trailerbunks a clean, finished look with this 4-pack of endcaps. Perfect for single-trailer installs or replacements. Designed for 2x4 boards and pairs with Caliber bunk wrap. ... This small pack is a practical solution for quick repairs without having to buy in bulk. Keep a set on hand for service calls or trailer maintenance. Perfect for One-Trailer Projects This 4-pack gives you everything you need to finish off a pair of standard 2x4 bunk boards.
Give your trailerbunks a clean, finished look with this 4-pack of endcaps. Perfect for single-trailer installs or replacements. Designed for 2x6 boards and pairs with Caliber bunk wrap. ... This small pack is a practical solution for quick repairs without having to buy in bulk. Keep a set on hand for service calls or trailer maintenance. Perfect for One-Trailer Projects This 4-pack gives you everything you need to finish off a pair of standard 2x6 bunk boards.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Features to Know About Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade. It holds up better than carpet and makes loading and unloading easier.
Buying wrap by the roll? These 2x4 endcaps finish off your bunks with a clean look. Includes 24 black caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.Highlights Designed for 2x4 Bunks: Caps fit standard trailerbunk boards for a finished look. Great for Bulk Projects: Includes 24 endcaps ideal for dealers and multi-trailer installs.
Buying wrap by the roll? These 2x6 endcaps finish off your bunks with a clean look. Includes 24 black caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.Highlights Designed for 2x6 Bunks: Caps fit standard 2x6 trailerbunk boards for a finished look. Great for Bulk Projects: Includes 24 endcaps ideal for dealers and multi-trailer installs.
Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.It's ideal for marine dealers, trailer shops, and service centers looking for a clean, low-maintenance alternative to carpet. Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade.
Give your trailerbunks a clean, finished look with this 4-pack of endcaps. Perfect for single-trailer installs or replacements. Designed for 2x6 boards and pairs with Caliber bunk wrap. ... This small pack is a practical solution for quick repairs without having to buy in bulk. Keep a set on hand for service calls or trailer maintenance. Perfect for One-Trailer Projects This 4-pack gives you everything you need to finish off a pair of standard 2x6 bunk boards.
Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.It's ideal for marine dealers, trailer shops, and service centers looking for a clean, low-maintenance alternative to carpet. Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade.
Working on multiple trailers? This wrap cuts drag at the ramp so your boats glide on and off with less effort. And with 250' to work with, you'll have plenty of wrap for large-scale projects or for stocking your boat supply store.It's ideal for marine dealers, trailer shops, and service centers looking for a clean, low-maintenance alternative to carpet. Great Fit for Aluminum Boats If you're tired of replacing your boat trailerbunk carpets and are trailering a raw aluminum boat, pontoon, or personal watercraft (PWC), this bunk wrap is a smart upgrade.
Buying wrap by the roll? These 2x6 endcaps finish off your bunks with a clean look. Includes 24 light gray caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.Highlights Designed for 2x6 Bunks: Caps fit standard 2x6 trailerbunk boards for a finished look. Great for Bulk Projects: Includes 24 endcaps ideal for dealers and multi-trailer installs.
Buying wrap by the roll? These 2x4 endcaps finish off your bunks with a clean look. Includes 24 light gray caps - great for trailer pros and marine shops handling multiple projects. Hardware not included.Highlights Designed for 2x4 Bunks: Caps fit standard trailerbunk boards for a finished look. Great for Bulk Projects: Includes 24 endcaps ideal for dealers and multi-trailer installs.
Filters
