Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 1-1/4" to 2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-1/4" to 2" thick rails
Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 1-1/4" to 2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-1/4" to 2" thick rails
Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 3/8" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 3/8"
Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 3/4" to 1-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 3/4" to 1-1/2" thick rails
Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 3/4" to 1-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 3/4" to 1-1/2" thick rails
Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar. Fits 1-3/4" to 2-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets and mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-3/4" to 2-1/2" thick rails
Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 1" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 1"
Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar. Sits 2" above rails. Requires Part B bracket (not included).Features: Replaces the Part A of High Rail Brackets for your Exposed Racks crossbar Requires Part B bracket (not included) Made in the USA Specs: Quantity: 2 brackets Height above rails: 2"
Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar. Fits 1-3/4" to 2-1/2" thick rails. Requires Part A bracket (not included).Features: Replaces the Part B of Z Brackets without mounting feet for your Exposed Racks crossbar Requires Part A bracket (not included) Made in the USA Specs: Quantity: 2 brackets Application: 1-3/4" to 2-1/2" thick rails
Replaces a missing or damaged barrel nut on the mounting hardware for your Yakima SkyBox rooftop box with this equivalent part.Features: Replaces a missing or damaged barrel nut on the mounting hardware for your Yakima SkyBox rooftop box with this equivalent part Fits Yakima SkyBoxes (Y07198, Y07186, Y07178, Y07175, Y07180, Y07184) Includes 1 barrel nut
Replaces a lost screw on your Ventline Northern Breeze roof vent for motor homes and enclosed trailers. Fits motor to motor bar, motor bar to frame, operator, and operator guide bar.Features: Connects the following parts: Motor to motor bar (4 screws required) Motor bar to frame (4 screws required) Operator to frame (2 screws required) Operator guide to dome (2 screws required) Works with Ventline Northern Breeze roof vent V2525 Includes (1) #8-19 x 1/2" screw for plastics Note: This illustration shows the location of 2 of the screws needed to install the fan motor.
Replace lost or damaged chains with this Curt weight distribution replacement lift chain kit. Includes four 3/8" lock nuts, two chains, and two U-bolts.Features: Replaces lost or damaged lift chains on your Curt weight distribution system Kit includes the following replacementparts Four 3/8" lock nuts Two lift chains Two U-bolts
This half-moon-shape vent forms the exterior part of the Alliance 2-piece enclosed trailer vent. Constructed of UV-resistant polypropylene plastic that holds up to sun exposure. Black color.Features: Exterior vent is the outside part of the Alliance 2-Piece Polypropylene Trailer Vent for 3" Diameter Hole Fits round interior trailer vent (AVT2; sold separately) Half-moon piece with flat, slotted side attaches to trailer's exterior Slots are on one side only, allowing you to position the vent for best airflow and to help prevent water from getting in Drain holes at the corners let out any water that does get in UV-resistant, polypropylene plastic construction stands up to the elements Black color Overall dimensions: 8" long x 6" wide x 1-1/4" tall Flange width: 1/2" 6 Screws (sold separately) required for installation Hole diameter: 3/16" (fits #8 screw) Sealant sold separately
This round vent forms the interior part of the Alliance 2-piece enclosed trailer vent. Constructed of UV-resistant polypropylene plastic that holds up to sun exposure. Black color.Features: Interior vent is the inside part of the Alliance 2-Piece Polypropylene Trailer Vent for 3" Diameter Hole Fits half-moon exterior trailer vent (HMAV2; sold separately) Round, slotted interior piece installs inside your trailer You can easily trim vent tube to fit thin walls UV-resistant, polypropylene plastic construction stands up to the elements Black color Specs: Fits 3" diameter hole in enclosed trailer Diameter at flange: 4-1/8" Vent tube outside diameter: 2-15/16" Tube depth: 1-1/2" Flange width: 5/8" 3 Screws (sold separately) required for installation Hole diameter: 3/16" (fits #8 screw) Sealant sold separately
This half-moon-shape vent forms the exterior part of the Alliance 2-piece enclosed trailer vent. Constructed of UV-resistant polypropylene plastic that holds up to sun exposure. White color.Features: Exterior vent is the outside part of the Alliance 2-Piece Polypropylene Trailer Vent for 3" Diameter Hole Fits round interior trailer vent (WAVT2; sold separately) Half-moon piece with flat, slotted side attaches to trailer's exterior Slots are on one side only, allowing you to position the vent for best airflow and to help prevent water from getting in Drain holes at the corners let out any water that does get in UV-resistant, polypropylene plastic construction stands up to the elements White color Overall dimensions: 8" long x 6" wide x 1-1/4" tall Flange width: 1/2" 6 Screws (sold separately) required for installation Hole diameter: 3/16" (fits #8 screw) Sealant sold separately
This round vent forms the interior part of the Alliance 2-piece enclosed trailer vent. Constructed of UV-resistant polypropylene plastic that holds up to sun exposure. White color.Features: Interior vent is the inside part of the Alliance 2-Piece Polypropylene Trailer Vent for 3" Diameter Hole Fits half-moon exterior trailer vent (WHMAV2; sold separately) Round, slotted interior piece installs inside your trailer You can easily trim vent tube to fit thin walls UV-resistant, polypropylene plastic construction stands up to the elements White color Specs: Fits 3" diameter hole in enclosed trailer Diameter at flange: 4-1/8" Vent tube outside diameter: 2-15/16" Tube depth: 1-1/2" Flange width: 1/2" 3 Screws (sold separately) required for installation Hole diameter: 3/16" (fits #8 screw) Sealant sold separately
Conversion kit replaces the D-rings on your BAKFLip tonneau cover with buckles and straps to secure cover in the open position.Features: Buckle and strap conversion kit for BAKFlip truck bed tonneau covers Fits, BAKFlip CS, BAKFlip CS-F1, BAKFlip Endura, BAKFlip F1, BAKFlip G2, BAKFlip HD, BAKFlip FiberMax, BAKFlip MX4, and BAKFlip VP Upgrades tonneau covers manufactured prior to April 2016 Replaces D-rings with buckles and straps to secure cover in open position Kit includes: 2 Topside buckle ends 2 Underside buckle bases 2 Straps (8-3/4" long x 1-1/8" wide) with buckles Mounting hardware
This heavy-duty 2-bike rack is perfect for carrying electric bikes and bikes with carbon frames or custom paint jobs. Integrated wheels let you roll the rack, so you don't have to carry it to your vehicle. Tilts with bikes loaded.Features: Platform bike rack carries 2 bikes using your vehicle's hitch receiver Integrated wheels let you roll the rack to your vehicle Ratcheting hooks on pivoting arms hold your bikes securely by the front wheels Sliding rear-wheel cradles let you carry bikes with different wheelbases Deep wheel cradles and extra-long wheel straps accommodate fat bike tires Front-mounted handle lets you tilt and fold the rack ease Tilts with bikes loaded to access cargo area Adjustable trays slide side-to-side for optimal bike spacing Tool-free installation with hand-tightening cam system Tightens rack inside your hitch to reduce movement and noise One-Key System locks deter theft of your bikes and the rack Durable steel construction with black powder coat is rust resistant Made in the USA Specs: Application: 1-1/4" x 1-1/4" (Class I and Class II) trailer hitch receivers Carrying capacity: 2 bicycles Weight capacity (total): 100 lbs Weight capacity (1 bike): 60 lbs Maximum tire width: 5.0" Maximum wheelbase: 50-1/2" Wheel diameter: 20" - 29" Distance between bikes: 12-1/2" Distance from center of hitch pin hole to: Closest part of rack when folded down: 7" Closest part of rack when folded up: 5" Farthest part of bike rack when folded down: 41-1/2" Farthest part of bike rack when folded up: 20-1/2" Carrier weight: 51 lbs Limited lifetime warranty Note: May interfere with bikes with front fenders.
Replace the vent cover on your Elixir trailer roof vent (made after 1995) or your Ventline trailer roof vent (V2094 - made before 2008) with this equivalent part. ... Features: Replacement cover for 14-1/4" x 14-1/4" roof vents Cover measures: 15" x 15" Lightweight, polypropylene domed cover Easy to install and operate White color Fits post-1995 Elixir trailer roof vents and Ventline pre-2008 trailer roof vent (V2094)
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from Stromberg Carlson using your existing mounting hardware.
Replaces the fabric on your etrailer 16' powered RV awning.Features: Replaces the worn or damaged fabric on your compatible etrailer 16' powered awning Made of 1,000D PVC tarpaulin, 16 oz, 4-layer vinyl fabric Heat-welded seams reduce needle-hole tear points Black fade fabric matches existing awning hardware Fits: Part number (e84QV), 16' powered awning
Replaces the fabric on your etrailer 18' powered RV awning.Features: Replaces the worn or damaged fabric on your compatible etrailer 18' powered awning Made of 1,000D PVC tarpaulin, 16 oz, 4-layer vinyl fabric Heat-welded seams reduce needle-hole tear points Black fade fabric matches existing awning hardware Fits: Part number (e74QV), 18' powered awning
Replaces the fabric on your etrailer 84" slide-out topper.Features: Replaces the worn or damaged fabric on your compatible etrailer 84" slide-out topper Made of 1,000D PVC tarpaulin, 16 oz, 4-layer vinyl fabric Heat-welded seams reduce needle-hole tear points Black fabric matches existing topper hardware Fits: Part number (e49QV), 84" slide-out topper
Replaces the fabric on your etrailer 78" slide-out topper.Features: Replaces the worn or damaged fabric on your compatible etrailer 78" slide-out topper Made of 1,000D PVC tarpaulin, 16 oz, 4-layer vinyl fabric Heat-welded seams reduce needle-hole tear points Black fabric matches existing topper hardware Fits: Part number (e69QV), 78" slide-out topper
Filters
