... Built-in LED tail lights.Features: Extra-large, hitch-mounted carrier lets you transport gear behind your truck, van, SUV, or RV Holds sporting goods, camping gear, work equipment, and more Carries up to 2 bikes with bike mounting kits (sold separately) Enclosed cargo box provides weatherproof storage space Automotive-grade TPE latches and weatherstripping around lid help keep water out Slide-out base lets you extend carrier 21" for rear vehicle access Cold-rolled steel TwinTube base telescopes easily with or without cargo loaded Braided steel safety cable prevents overextension Wide-mouth, clamshell-style lid provides cargo access without blocking rear of vehicle Opens from the center - each half folds to the side Includes 2 locks to secure the lid closed LED tail lights, illuminated license plate bracket, and reflectors enhance visibility and safety Wiring harness plugs into your vehicle's 4-way trailer connector Rounded, polypropylene box is durable, aerodynamic, and easy to clean Drain plug lets you easily hose out box interior 2-Piece base allows for simple installation Requires at least 2 people to slide cargo box onto shank assembly Optional Landing Gear (sold separately) supports cargo box to minimize lifting Adjustment points on base provide up to 7" clearance from the back of your vehicle Add an 8" hitch extender (sold separately) for more clearance 2 Anti-rattle Silent Hitch Pins prevent wobbling and noise in trailer hitch receiver Hitch locks sold separately Light gray color Made in the USA Specs: Application: 2" x 2" trailer hitch receivers Hitch must have a minimum tongue weight rating of 350 lbs Distance from center of hitch pin hole to outside edge of carrier: When carrier is extended: up to 31" When carrier is retracted: up to 10" Slide-out platform rise: 6" Carrying capacity: 34 cu ft Weight capacity: 300 lbs Box dimensions Inside: 63" long x 28" wide x 40" tall Outside: 68" long x 33" wide x 40" tall Overall height: 51" Weight: 160 lbs 3-Year limited warranty
LED lightkit for etrailer.com's hitch mounted, RV mounted, and enclosed cargo carriers. Surface-mount, water resistant trailer lights serve 3 functions: brake, tail, turn. ... Features: Low-profile, water resistant trailer lights provides stop, tail, and turn signal functions Works with all cargo carriers that have square rails Specifically designed for etrailer hitch mounted cargo carrier (e98874), etrailer RV mounted cargo carriers (e99049, e99050, e83YR, or e96ZR), and etrailer enclosed cargo carriers (e34VV, e94VV, C63ZJ, or e54VV) Sonically sealed, water resistant housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs are brighter than conventional lights Never replace a bulb again, 100% maintenance free Polycarbonate lens and housing Includes 2 multifunction LED lights, brackets, wiring, connectors, and instructions DOT compliant Specs: Dimensions: 15-9/16" long x 1-5/16" tall x 1/2" deep Mounting holes: 14-9/16" apart on center Diodes: 11 Power draw at 12.8 volts: Stop light: 0.2 amps Tail light: 0.01 amps Wire harness length: 8' Wire gauge: 18 AWG Lifetime warranty on LEDs
Complete your cargo carrier setup with these tail lights and mounting brackets. Easy to install brackets let you relocate your license plate to the front of your cargo carrier and add tail lights. ... Features: Convenient license plate and LED tail light mounting kit lets you complete your cargo carrier setup Fits e98874, C18153, and C18152 carriers License plate mounting bracket allows you to relocate your license plate to the front of your cargo carrier Keeps plate visible when you are hauling larger cargoLight brackets let you mount tail lights on your carrier Lights give your cargo carrier stop, tail, and turn signal lights 12 LEDs with faceted mirror gleam are maintenance free Easy installation with included mounting hardware Note: This bracket will not work with an e98874 cargo carrier that was purchased after October 2024.
Replaces the 4-way flat, wishbone wiring harness for your hitch-mounted cargo carrier lightkit (52014) or LED lightkit for cargo carriers (98174LED). 4-Way flat plug connects to your vehicle, 3-way plugs connect to the back of the lights.Features: Replaces the 4-way flat, wishbone wiring harness for your hitch-mounted cargo carrier lightkit (52014) or LED lightkit for cargo carriers (98174LED) 4-Way flat plug connects to your vehicle, 3-way plugs connect to the back of the lights Wire colors: White wire for ground Brown wire for tail lights Yellow wire for driver's-side stop/turn Green wire for passenger's-side stop/turn Specs: Wire length: Driver Side: 5.1' Passenger Side: 8.7' Plastic loom length: 10-1/2" long
This hitch-mounted cargo carrier tilts away from your vehicle - with gear loaded - for easy cargo area access, and it folds up for storage when not in use. ... Features: Hitch-mounted, basket-style cargo carrier lets you carry gear on the back of your vehicle Perfect for luggage, coolers, soiled items, and more Convenient tilting and folding design Tilts with carrier unloaded for easy access to vehicle's rear cargo area Fold the carrier up against the rear of your vehicle when not in use Raised side rails help keep cargo in place and provide multiple tie-down points Convert to an enclosed carrier with an etrailer cargo cage (e82FV - sold separately) Locking doors help deter theft of your gear Stop collar automatically aligns shank and hitch pin holes Eliminates need to get on your hands and knees to align hitch pin holes Anti-rattle hitch bolt reduces movement of the carrier in your hitch receiver Lightkit (e98943-44LED or e67RV - sold separately) keeps you street legal if taillights are blocked If you purchased this carrier after October 2024, you will need the e67RV lightkit (coming soon) as the e98943-44LED kit does not work Specs: Application: 2" x 2" trailer hitch receivers Weight capacity: 500 lbs Outside dimensions: 61-1/2" wide x 25-5/8" deep x 3-3/4" tall Inside dimensions: 60-1/4" wide x 24" deep x 3" tall Shank rise: 2" Distance from center of hitch pin hole to: Closest edge of carrier when folded up: 9-1/2" Closest edge of carrier when folded down: 19-1/2" Farthest edge of carrier when folded up: 19" Farthest edge of carrier when folded down: 45" Weight: 48 lbs Construction: black powder-coated steel Warranty: limited lifetime Notes: This is not rated for use on the back of an RV or motorhome.
This lightkit lets you add stop, turn, and tail light functions to your GearCage or BigBoss hitch-mount cargo carrier. Includes 2 LED lights, 2 brackets, 2 license plate brackets, and a 4-way flat connector.Features: LED lightkit provides stop, turn, and tail light functions for your GearCage4, GearCage6, or BigBoss (H01380, H01397, or H01465 - sold separately) hitch-mount cargo carrier Required if your cargo carrier blocks your vehicle's tail lights 2 Red LED lights are brighter and longer lasting than standard incandescent bulbs Eliminate the need to replace bulbs Wiring harness with standard 4-way flat connector ensures easy setup 2 Surface brackets allow you to mount the lights on your cargo carrier 2 License plate brackets included for attachment below LED light Specs: Wiring harness length: 72" Light dimensions: 6" long x 2" tall 1-Year limited warranty
Perfect for trucks and vehicles with good ground clearance, the Stromberg Carlson cargo carrier can handle everything from your family's camping gear to this year's deer harvest. Plus it won't interfere with your tailgate when unloaded.We recommend building it at least a day ahead of its initial use Accessories we recommend: Locking hitch pin ( e98881 ) You'll need a hitch pin since this carrier doesn't come with one. And we like this one because it also locks the carrier in your hitch Bike rack ( CC-125 ) for those adventures when you need to carry a couple bikes rather than gear Alignment collar ( e98942 ) automatically aligns hitch pin holes Lightkit ( e98943-44LED ) keeps you street legal when loaded up Ratchet straps ( e72NR ) secures your gear in the carrier Enclosure cage ( e82FV ) converts basket into an enclosed carrier Cargo bag ( 988501 ) provides weather resistant protection for your gear Specs: Application : 2" x 2" trailer hitch receivers Weight capacity : 500 lbs (or a large grizzly bear) Measurement from center of hitch pin to closest edge of carrier : 8" Measurement from center of hitch pin to back of carrier : 31" Dimensions : Interior : 60" long x 23-5/8" wide x 2-5/16" deep Exterior : 60" long x 23-5/8" wide x 2-5/16" tall Weight : 39 lbs (or a full gallon of paint) Construction : Matte black, powder coated steel Warranty : 1-year limited
etrailer.com's LED lightkit for Tow Ready, Rola, Pro Series, and Draw-Tite cargo carriers with integrated light brackets features 12 super-bright, powerful LED's per light with the faceted mirror gleam reflector for a superior look.Features: Fits Draw-Tite (40101 or 63153), Rola (59502 or 59507), Pro Series (63153) and Tow Ready (63155) trailer hitch mounted cargo carriers LEDs are brighter than conventional lights Never replace a bulb again, 100% maintenance free Uses 12 LED with faceted mirror gleam reflector for superior look Overall length of offset y-harness wire: 88" Length of wire for driver side portion: 46" If additional wire length is needed, a 12" extension (9653P - sold separately) is recommended for installation LED Lightkit for Draw-Tite, Tow Ready, Pro Series, and Rola railed cargo carriers LightKit Installation Step 1 Mount rubber grommets on both sides of cargo carrier tray making sure grommets are seated securely.
Perhaps the easiest lightkit to install, the sealed light units snap into the built-in mounting brackets on Draw-Tite, Rola and Tow Ready cargo carriers and then plug into the existing 4-pole trailer connector on the vehicle.Features: Fits Draw-Tite 40101, Rola 59502 and 59507, and Pro Series 63153 and 63155 trailer hitch mounted cargo carriers Off-set Y-harness - one lead measures about 3' LightKit Installation Step 1 Mount rubber grommets on both sides of cargo carrier tray making sure grommets are seated securely.
Run out of room in your vehicle? This hitch-mounted cargo carrier gives your gear a secure place to ride. Luggage, coolers, even the grimy stuff. Load it from the front, lock it up, and hit the road without thinking about it again until you unload.Cage Off, Tall Gear On: Remove the top enclosure to haul bulky items that wont fit under a lid. Aligned Without the Crawl: Stop collar lines up your hitch and pin holes without getting on your hands and knees. Extras Available: Add a cargo cover or lightkit (sold separately) to keep things dry, secure, and road legal.
Run out of room in your vehicle for all your gear? We've paired the Reese cargo carrier with our etrailer cage so you can toss your stuff in, lock it up, and forget it. And, if you pack the cage tight you won't need to strap anything down!And, since this enclosed carrier keeps all your gear locked inside, you can make pit stops without worrying about anything getting stolen. The Reese cargo carrier keeps your ride street legal with the included lightkit. It has oval cutouts where the lights attach, so if your gear blocks the taillights you're still good to go.
Designed for adventurers who spend their weekends on the road or camping in the woods, the Curt cargo carrier has 4 welded support bars that add rigidity to the mesh floor and keep it from warping over time, due to regular use.It's so easy, we're confident in saying you could build it while loading up for your first trip with it Accessories we recommend: Locking hitch pin ( e98881 ) You'll need a hitch pin since this carrier doesn't come with one. And we like this one because it also locks the carrier in your hitch Alignment collar ( e98942 ) automatically aligns hitch pin holes Lightkit ( e98943-44LED ) keeps you street legal when loaded up Ratchet straps ( e72NR ) secures your gear in the carrier Enclosure cage ( e82FV ) converts basket into an enclosed carrier Cargo bag ( 988501 ) provides weather resistant protection for your gear Specs: Application : 2" x 2" trailer hitch receivers Weight capacity : 500 lbs (or a large grizzly bear) Shank rise : 2-1/2" Side rail height (taken from mesh floor) : 5-1/2" Measurement from center of hitch pin to closest edge of carrier : 11-1/4" Measurement from center of hitch pin to back of carrier : 36-1/2" Dimensions : Interior : 60" long x 24" wide x 5-1/2" deep Exterior : 61-9/16" long x 25-5/8" wide x 8-3/8" tall Weight : 64 lbs (or a full-size, metal shopping cart) Construction : Matte black, E-coated and powder coated steel Warranty : 1-year limited
Mounting brackets allow you to add tail lights (sold separately) to your etrailer or Curt hitch-mounted cargo carrier. Designed to work with models e98874, C18153, and C18152.Features: Mounting bracket allows you to add tail lights to your hitch-mounted cargo carrier Fits e98874, C18153, and C18152 carriers Works with lightkit 20174 and 98174LED (sold separately) Easy installation with included mounting hardware Brackets slide over top rail and secure through mesh bottom Note: This bracket will not work with an e98874 cargo carrier that was purchased after October 2024.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Tow your small trailer with this completely hidden trailer hitch. Remove the ball mount for a fully concealed look when you're not towing. Use the included receiver attachment to mount a bike rack or cargo carrier. ... This hitch also comes with a removable 2" square receiver, which can be used to mount any variety of hitch accessories, like your bike rack or cargo carrier.
Filters
