Adapt your camper shell, truck bed rails, and other flat surface to carry gear with this roof rack system. SkyLine towers mount to tracks. Heavy-Duty crossbars with integrated tie down points accommodate clamp-on and channel-mount accessories. Track length: 60" per side Crossbar dimensions: 60" long x 3" wide x 1-1/2" tall Bolt length: 1" Tower height: 3" T-slot dimensions: 13/16" wide x 1/4" tall T-slot
Adapt your camper shell, truck bed rails, and other flat surface to carry gear with this roof rack system. SkyLine towers mount to tracks. Black JetSteam aero crossbars accommodate clamp-on and channel-mount accessories. length: 60" per side Crossbar dimensions: 60" long x 2-3/4" wide x 1-1/8" tall Bolt length: 1" Tower height: 3" Limited lifetime warranty
Adapt your camper shell, truck bed rails, and other flat surface to carry gear with this roof rack system. SkyLine towers mount to tracks. Silver JetSteam aero crossbars accommodate clamp-on and channel-mount accessories. length: 60" per side Crossbar dimensions: 60" long x 2-3/4" wide x 1-1/8" tall Bolt length: 1" Tower height: 3" Limited lifetime warranty
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" ... Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Hub bolt pattern: 4 on 4" Grease cap flange diameter: 1.988" Wheel stud dimensions: 1/2" diameter x 1-5/16" long
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" ... Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Hub bolt pattern: 5 on 4-1/2" Grease cap flange diameter: 1.988" Wheel stud dimensions: 1/2" diameter x 1-5/16"
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" ... Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Hub bolt pattern: 5 on 4-1/2" Grease cap flange diameter: 1.988" Wheel stud dimensions: 1/2" diameter x 1-5/16"
Standard Grade
Idler Hubs
Leaf Spring Suspension
etrailer
No Drop or Lift
2000 lbs
5 on 4-1/2 Inch
60 Inch Hub Face
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 8" ... Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Hub bolt pattern: 5 on 4-1/2" Grease cap flange diameter: 1.988" Wheel stud dimensions: 1/2" diameter x 1-5/16"
Round trailer axle beam measures 60" from hub-face-to-hub-face and 48" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" ... Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Hub bolt pattern: 5 on 4-1/2" Grease cap flange diameter: 1.988" Wheel stud dimensions: 1/2" diameter x 1-5/16"
Round trailer axle beam measures 60" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 48" from spring-center-to-spring-center. Easy Grease spindles make it easy to ... support from the experts at etrailer.com Made in the USA Specs: Weight capacity: 2,000 lbs Hub-face-to-hub-face length: 60" Spring-center-to-spring-center length: 48" Axle diameter: 1-3/4"
Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for hydraulic disc brake applications.
Use this actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for hydraulic disc brakes and 3x4 straight tongue.
Bias tire has a ply rating of 8 and a 1,040-lb maximum load at 70 psi. The 8" diameter x 7" wide steel trailer wheel features a 5 on 4-1/2 bolt pattern and a corrosion-resistant powder coat finish. 4-1/2" Wheel capacity: 1,040 lbs Wheel bolt size: 1/2"-20 Offset: 0 Pilot diameter: 2.8" Tire size: 215/60-8 Section width: 8.9" Outer diameter (when inflated): 18.1" Tire capacity
Use this actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for hydraulic disc brakes and 3x5 straight tongue.
Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for hydraulic drum brake applications.
For years, this UFP-style surge brake actuator has been the gold standard for boat trailers. Its weld-on, low-profile design looks sleek on your trailer, and the electric lockout lets you back up without locking up your disc brakes. Made in the USA.
For years, this UFP-style surge brake actuator has been the gold standard for boat trailers. Its low-profile design looks sleek, and can be easily welded and and painted to match your trailer. Includes the fill cap. Made in the USA.
Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for hydraulic drum brake applications.
Bias tire has a ply rating of 6 and a 935-lb maximum load at 50 psi. The 8" diameter x 7" wide steel trailer wheel features a 5 on 4-1/2 bolt pattern and a corrosion-resistant galvanized finish.: 1165 lbs Wheel bolt size: 1/2"-20 Offset: 0 Pilot diameter: 2.8" Tire size: 215/60-8 Section width: 8.9" Outer diameter (when inflated): 18.3" Tire capacity: Load range: C Ply rating
Use this actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for hydraulic drum brake applications and 3 x 5 mounting.
Bias tire has a ply rating of 6 and a 940-lb maximum load at 50 psi. The 8" diameter x 7" wide steel trailer wheel features a 4 on 4 bolt pattern and a corrosion-resistant powder coat finish.; Wheel capacity: 1165 lbs Wheel bolt size: 1/2"-20 Offset: 0 Pilot diameter: 2.5" Tire size: 215/60-8 Section width: 8.9" Outer diameter (when inflated): 18.3" Tire capacity: Load range
Use this actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for hydraulic disc brakes and 3x3 or 3x4 straight tongue.
Designed for use with your 60" long SuperHitch SuperTruss receiver extension, one end of this no-splice wiring harness plugs into your truck's 7-way blade trailer connector. The other end ... for connecting to your trailer wiring Designed specifically to work with the 60" long TorkLift SuperTruss hitch extender (TLE1560 - sold separately) Mounting bracket for 7-way plug is included with
Use this actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for hydraulic drum brakes and 3x3 or 3x4 straight tongue.
Filters
