Heavy-duty kit gets you tow lights that will last for the long haul, with rubber-coated housing, powerful magnetic bases, and a robust wiring harness. Displays brake and turn signals on your trailer or towed car. Comes with a handy carrying case.
This LED light bar is completely wireless, receiving brake and turn signals from a transmitter plugged into your vehicle's 4-pin round. It runs on a rechargeable battery. Weatherproof and super durable, it mounts securely with heavy-duty magnets.Features: Wireless light bar and transmitter Transmitter plugs into tow vehicle's 4-pin socket Bright and efficient LEDs Rechargeable battery 12V DC charging cord included Easy to store Convenient handle Super durable so you can use year-round Durable polyethylene housing won't warp or crack Heavy-duty magnets Rubber coating protects your car from scratches DOT compliant Made in the USA Specs: Light bar dimensions: 23" long x 5" tall x 2-1/2" thick 4-Pin connector dimensions: 5-1/4" long x 2-5/16" wide x 2" thick Magnet base diameter: 3-1/2" Diodes: 17 total Front bar: 11 Turn signal: 2 per signal Side markers: 1 per signal Cord length: 6' Battery life: approximately 4-8 hours 3-Year limited warranty
Establish a secure connection between your trailer and your towing vehicle with this 4-pole, round pin, wire-insertion style socket. Zinc die-cast socket has concealed terminals to provide easy assembly and durability .Features: Heavy-duty, metal, 4-pole socket connects trailer to towing vehicle Round brass pins Minimum voltage drop is ensured Dielectric (non-conducting) grease coating Protects against corrosion and resistance Wire gauges up to #12 gauge wire accepted Concealed terminals for durability Provide easy assembly Spring-loaded lid Keeps dust and moisture out of interior 2-Hole mounting style Specs: Fits Pollak Heavy-Duty, 4-Pole Round Pin Connector (PK11402) Does not fit Pollak Heavy-Duty, 4-Pole, Round Pin (PK11409) Mounting dimensions: 1-3/8" diameter hole Mounting screw holes: 1/4" Volt rating: 12 volts - 24 volts Current rating: 35 amps Wiring configuration: Color - circuit: White - Ground Return Green - Right Turn and Brake Lights Yellow/Red - Left Turn and Brake Lights Brown - Tail Lights 1-Year limited warranty 11-404 Pollak Heavy-Duty, 4-Way, Round Pin Trailer Wiring Socket, Concealed Terminals - Metal - Vehicle End
Get a head-start on wiring your towed car before you even get the installation started. This kit comes with butt connectors pre-installed and ready to splice into your wiring. Integrated block diodes protect your vehicle from electrical feedback.
This adapter cord connects your RV to your towed car with a 7-way plug on one end and a 4-way on the other. It's coiled so it won't drag on the ground, and stretches up to 8'. Includes 4-way round socket to install on your vehicle.
Trailer connector splices into your vehicle's existing wiring. Built-in magnet creates tight connection with an EZ Connector trailer-end plug (sold separately). O-ring makes a watertight seal. Face-to-face contacts mean no broken terminals.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring on lid creates a watertight seal when lid is closed to keep out moisture and debris Marine-grade wiring resists water damage Spring-loaded, self-closing lid automatically covers connector Simple installation Hardwires to existing wiring with included connectors Mounting bracket sold separately Made in the USA Specs: Wiring harness length: 4" Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. Comes with a pin and clip.Features: Lockrail system on ball platform lets you torque the hitch ball down with a single wrench X-Shape shank drains moisture to avoid corrosion Built-in rise and drop Hitch pin and clip included Specs: Fits: 2" x 2" hitch receivers Ball diameter: 2" Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Rise: 4" Drop: 5-1/4" Overall length: 13" Center of pin hole to center of ball: 10" Limited 1-year warranty
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals. O-ring on lid makes a watertight seal.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Designed for use with an existing factory tow package Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring on lid creates a watertight seal when lid is closed to keep out moisture and debris Marine-grade wiring resists water damage Spring-loaded, self-closing lid automatically covers connector Connector fits into factory socket mounting location on most newer vehicles Adapter brackets or standard mounting bracket (sold separately) also available Made in the USA Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring in socket creates a watertight seal when connected to keep out moisture and debris Marine-grade wiring resists water damage Dummy plug inserts into socket when connector is not in use to protect contacts from dirt and debris Quick and easy installation - no cutting or splicing Locate connection points behind rear bumper Plug in connector Standard mounting bracket included Adapter bracket (sold separately) also available Made in the USA Specs: Wiring harness length: 2' Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
Trailer connector splices into your vehicle's existing wiring. Built-in magnet creates tight connection with an EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no broken terminals.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Compatible with 4-pin, 5-pin, and 6-pin EZ-Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring in socket creates a watertight seal when connected to keep out moisture and debris Marine-grade wiring resists water damage Dummy plug inserts into socket when connector is not in use to protect contacts from dirt and debris Simple installation Hardwires to existing wiring with included connectors Standard mounting bracket included Made in the USA Specs: Wiring harness length: 2' Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring in socket creates a watertight seal when connected to keep out moisture and debris Marine-grade wiring resists water damage Dummy plug inserts into socket when connector is not in use to protect contacts from dirt and debris Quick and easy installation - no cutting or splicing Locate connection points behind rear bumper Plug in connector Standard mounting bracket included Adapter bracket (sold separately) also available Made in the USA Specs: Wiring harness length: 2' Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
Replace the existing 7-way on your vehicle with this socket. Built-in magnet creates tight connection with EZ Connector trailer-end plug (sold separately). Face-to-face contacts mean no bent or broken terminals. O-ring on lid makes a watertight seal.Features: 7-Way trailer connector installs at the back of your vehicle to power your trailer's signal lights Designed for use with an existing factory tow package Compatible with 4-pin, 5-pin, and 6-pin EZ Connector adapters (sold separately) Powerful magnet in socket joins with magnet in EZ Connector trailer-end plug (sold separately) to keep connection secure Plugs stay tightly connected, despite the bumps and vibrations common with towing Face-to-face electrical contacts - no pins or blades to bend or break Eliminates concerns about electrical arcing and abraded pins Contacts are easy to clean when necessary Ideal for marine applications Silicon O-ring on lid creates a watertight seal when lid is closed to keep out moisture and debris Marine-grade wiring resists water damage Spring-loaded, self-closing lid automatically covers connector Mounting bracket sold separately Made in the USA Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any pins or blades to bend or break.
You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.To reach the connector, remove the storage pocket that is built into the center of your dash, just above the ashtray. Then you'll see the gray, 4-pin connector that mates with the adapter. Once you're plugged into the factory port, just plug the other end of the adapter into the main unit.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display is large and bright so it's easy to see, while the large manual override is easy to reach in a pinch.To reach the connector, remove the storage pocket that is built into the center of your dash, just above the ashtray. Then you'll see the gray, 4-pin connector that mates with the adapter. Once you're plugged into your factory port, just plug the other end of the adapter into the Discovery.
This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.To reach the connector, remove the storage pocket that is built into the center of your dash, just above the ashtray. Then you'll see the gray, 4-pin connector that mates with the adapter. Once you're plugged into the factory port, just plug the other end of the adapter into the TriFlex.
This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.To reach the connector, remove the storage pocket that is built into the center of your dash, just above the ashtray. Once you have removed the pocket, you will see the gray, 4-pin connector that mates with the adapter. Then plug the other end into the DirecLink. The harness with the OBD connection also plugs into the controller and then connects to your vehicle's computer by plugging into your OBD-II port.
Establish a secure connection between your trailer and tow vehicle with this metal, 4-pole plug. Round brass pins ensure minimum voltage drop, and pull grips enable easy insertion and removal.Features: Heavy-duty, metal, 4-pole plug connects trailer to socket on tow vehicle Fits Pollak heavy-duty, 4-pole round pin wiring socket (PK11404) Does not fit Pollak heavy-duty, 4-pole, round pin socket, concealed terminals (PK11410) Round, solid brass terminal pins Minimum voltage drop is ensured Dielectric (non-conducting) grease Prevents corrosion and resistance Solid brass terminal screws Zinc, die-cast housing for durability Finger grips make insertion and removal easy Cable lock with plated steel retainer screw Prevents chafing Provides more support for cables Saves installation time High-impact, ABS thermoplastic interior Includes extended lip for easy removal and replacement Accepts up to #12 gauge wires Interchangeable with competitive brands Specs: Volt rating: 12 volts - 24 volts Current rating: 35 amps Wiring configuration: Color - circuit: White - Ground Return Green - Right Turn and Brake Lights Yellow/Red - Left Turn and Brake Lights Brown - Tail Lights 1-Year limited warranty
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. Comes with a pin and clip.Features: Lockrail system on ball platform lets you torque the hitch ball down with a single wrench X-Shape shank drains moisture to avoid corrosion Built-in rise and drop Hitch pin and clip Durable steel with black matte finish Specs: Fits: 2" x 2" hitch receivers Ball diameter: 2" Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Rise: 3/4" Drop: 2" Overall length: 12-1/2" Center of pin hole to center of ball: 8-1/2" Limited 1-year warranty
Built tough with a die-cast metal housing, this 4-way round plug keeps your trailer connected and your wiring protected. The built-in cable guard fights chafing, while the stainless steel spring keeps things snug.Secure, chafe-free wiring: Unique cable clamp provides extra support and prevents fraying for long-term reliability. 4-Pole round design: Ensures minimum voltage drop with solid brass terminal pins. User-friendly finger grips: Simplifies insertion/removal for quick towing connections.
Establish a secure connection between your trailer and your towing vehicle with this 4-pole, round pin, wire-insertion-style socket. Chrome-plated socket has concealed terminals to provide easy assembly and durability.Features: Heavy-duty, chrome-plated, 4-pole socket connects trailer to towing vehicle Fits Pollak Heavy-Duty 4-Pole Round Pin Connector (PK11409) Does not fit Pollak Heavy-Duty, 4-Pole, Round Pin (PK11402) Round brass pins Minimum voltage drop is ensured Dielectric (non-conducting) grease coating Protects against corrosion and resistance Concealed terminals for durability Provide easy assembly Spring-loaded lid Keeps dust and moisture out of interior 2-Hole mounting style Specs: Application: Chrome, 4-pole connectors measuring 13/16" in diameter Volt rating: 12 volts - 24 volts Current rating: 20 amps Mounting hole diameter: 1/4" Wiring configuration: Color - circuit: White - Ground Return Green - Right Turn and Brake Lights Yellow/Red - Left Turn and Brake Lights Brown - Tail Lights 1-Year limited warranty
Establish a secure connection between your trailer and tow vehicle with this chrome-plated, 4-pole plug. Split brass pins ensure minimum voltage drop, and pull grips enable easy insertion and removal.Features: Heavy-duty, 4-pole plug connects trailer to socket on tow vehicle Round, split brass contacts Minimum voltage drop and maximum current capacity are ensured Dielectric (non-conducting) grease coating Prevents corrosion and resistance Solid brass terminal screws Chrome-plated, die-cast zinc housing for durability Finger grips make insertion and removal easy ABS thermoplastic interior High-impact, green insulators Specs: Fits Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket (PK11410) Does not fit Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket (PK11404) Plug diameter: 13/16" Volt rating: 12 volts - 24 volts Current rating: 20 amps Wiring configuration: Color - circuit: White - Ground Return Green - Right Turn and Brake Lights Yellow/Red - Left Turn and Brake Lights Brown - Tail Lights Maximum size wire gauge: 12 1-Year limited warranty
This ball mount is designed in a unique X-shape so water can drain out of your receiver while it's installed, preventing seize up. Comes with a pin and clip.Features: Lockrail system on ball platform lets you torque the hitch ball down with a single wrench X-Shape shank drains moisture to avoid corrosion Built-in rise and drop Hitch pin and clip Specs: Fits: 2" x 2" hitch receivers Ball diameter: 1-7/8" Gross towing weight: 5,000 lbs Tongue weight: 500 lbs Rise: 3/4" Drop: 2" Overall length: 12-1/2" Center of pin hole to center of ball: 8-1/2" Limited 1-year warranty
You hook up your trailer and the lights respond right away, no loose connections, no second checks. It helps you replace worn or unreliable connections so your wiring works the way it should every time.
This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.To reach the connector, remove the storage pocket that is built into the center of your dash, just above the ashtray. Then you'll see the gray, 4-pin connector that mates with the adapter. Once you're plugged into the factory port, just plug the other end of the adapter into the Venturer.
Filters
