This light-duty toggleswitch combines space-saving size and economy. May be used in automotive, light-truck, off-road, and RV applications. Includes mounting hardware.Features: Combines space-saving size and economy Includes mounting hardware Specs: Applications: automotive, light-truck, off-road, and RV Capacity: 35 amps at 6 volts Capacity: 20 Amps at 12 volts Handle length: 3/8" Diameter of mounting stem: 7/16" Togglepositions: on-off Construction: brass with chrome-plated toggleswitch and face nut Number of terminals: 2 Terminal type: screw Quantity: 1 1-Year limited warranty
This light-duty toggleswitch combines space-saving size and economy. May be used in automotive, light-truck, off-road, and RV applications. Includes mounting hardware and 6" wire leads.Features: Combines space-saving size and economy Includes mounting hardware and 6" wire leads Specs: Applications: automotive, light-truck, off-road, and RV Capacity: 10 amps at 12 volts Togglepositions: on-off Quantity: 1 1-Year limited warranty
This single-pole, single-throw light-duty toggleswitch combines space-saving size and economy. May be used in automotive, light-truck, off-road, and RV applications. Includes mounting hardware.Features: Single-pole, single-throw rocker switch Pre-assembled knurled-face nut indicator plate, back nut, and terminal screws Combines space-saving size and economy Includes mounting hardware Specs: Applications: automotive, light-truck, off-road, and RV Capacity: 20 Amps at 12 volts Togglepositions: on-off Construction: nylon housing with face plate Number of terminals: 2 Terminal type: screw Quantity: 1 1-Year limited warranty
You turn the key and the truck responds the way you expect, no hesitation, no second try. It is one less thing to think about when you are ready to get moving and stay on schedule.Consistent Electrical Contact: Maintains steady connection for ignition cycles. OEM Replacement Design: Matches original switch found in semi trailers and box trucks. Compact Housing Size: Fits cleanly within dash space. Integrated Ignition Control: Handles start and run positions in one unit.
You turn the key and the engine comes to life without extra steps, even on a cold start. It keeps your routine simple so you can stay focused on getting out on the water instead of adjusting controls.Highlights Push To Choke Function: Built-in choke control simplifies cold starts. Three Position Operation: Off, run, and start control in one switch. Magneto Grounded Off: Grounds ignition system when turned off. Stainless Steel Terminals: Helps resist corrosion in marine environments.
Single-pole, double-throw, heavy-duty toggleswitch designed for high-current applications. Oversized internal copper contacts carry up to 50-amp current loads. Provides longest-possible service life.Features: Custom-designed, chrome-finish toggle Single-pole, double-throw (on-off-on) toggleswitch Designed for high-current applications Provides longest-possible service life Aluminum knurled face nut Nickel-plated hex nut Rugged, glass-filled nylon slide Die-cast body Copper contact bridge Copper contacts Brass terminals riveted to base to handle 3 in-lb torque Laminated bakelite base Plated combination-head screws Specs: DC volts: 12 DC amps: 50 Length of handle: 1" Diameter of copper contacts: 0.22" Size of screws: #8-32 Circuitry: on-off-on Number of terminals: 3 Type of terminals: screw Quantity: 1 Made in the USA 1-Year limited warranty
Single-pole, single-throw, heavy-duty toggleswitch designed for high-current applications. Oversized internal copper contacts carry up to 50-amp current loads. Provides longest-possible service life.Features: Custom-designed, chrome-finish toggle Single-pole, single-throw (on-off) toggleswitch Designed for high-current applications Provides longest-possible service life Aluminum knurled face nut Nickel-plated hex nut Rugged, glass-filled nylon slide Die-cast body Copper contact bridge Copper contacts Brass terminals riveted to base to handle 3 in-lb torque Laminated bakelite base Plated combination-head screws Specs: DC volts: 6-24 DC amps: 50 Length of handle: 1" Diameter of copper contacts: 0.22" Size of screws: #8-32 Circuitry: on-off Number of terminals: 2 Type of terminals: screw Quantity: 1 1-Year limited warranty
Single-pole, single-throw, heavy-duty toggleswitch designed for high-current applications. Oversized internal copper contacts carry up to 50-amp current loads. Provides longest-possible service life.Features: Custom-designed, chrome-finish toggle Single-pole, single-throw (on-off) toggleswitch Designed for high-current applications Provides longest-possible service life Aluminum knurled face nut Nickel-plated hex nut Rugged, glass-filled nylon slide Die-cast body Copper contact bridge Copper contacts Brass terminals riveted to base to handle 3 in-lb torque Laminated bakelite base Plated combination-head screws Specs: DC volts: 12 DC amps: 50 Length of handle: 1.5" Diameter of copper contacts: 0.22" Size of screws: #8-32 Circuitry: on-off Number of terminals: 2 Type of terminals: screw Quantity: 1 Made in the USA 1-Year limited warranty
You flip the switch and the connection responds right away, no delay, no exposed wires to worry about. It gives you a clean way to control power while keeping your wiring protected and easy to route.Highlights Single Pole ToggleSwitch: Simple on-off control for power circuits. PVC Coated Leads: 8" wires protect connections and simplify routing. Prewired Lead Design: Eliminates need for terminal crimping.
Single-pole, single-throw, medium-duty toggleswitch. Internal copper contacts carry up to 20-amp current loads.Features: Custom-designed, chrome-finish toggle Single-pole, single-throw (on-off) toggleswitch Designed for medium-current applications Includes face plate Nickel-plated hex nut and ring nut Brass terminals riveted to base Specs: DC volts: 12 DC amps: 20 Length of handle: 11/16" Diameter of mounting stem: 15/32" Circuitry: on-off Number of terminals: 2 Type of terminals: screw Quantity: 1 1-Year limited warranty
... Protects against salt spray. Resists weather and ozone. Can be used on toggleswitches with 15/32" diameter mounting stem.Features: EPDM rubber boot Protects against salt spray Resists weather and ozone Includes mounting hardware Specs: Can be used with automotive, light truck, off-road, marine, and RV applications Fits toggleswitches with 15/32" diameter mounting stem 15/32"-32 Thread Quantity: 1 1-Year limited warranty
This face plate fits on-off toggleswitches and may be used in automotive, light-truck, off-road, and RV applications.Features: Applications: automotive, light-truck, off-road, and RV Fits Pollak on-off toggleswitches (sold separately) Quantity: 1 Made in the USA 1-Year limited warranty
EPDM rubber half-boot with 15/32"-32 thread. Protects against salt spray. Resists weather and ozone. Allows toggle handle of any length to protrude.Features: EPDM rubber half-boot Protects against salt spray Resists weather and ozone Allows toggle handle of any length to protrude Includes mounting hardware Specs: Can be used with automotive, light truck, off-road, marine, and RV applications Fits toggleswitches of any length with 0.155" to 0.24" diameter 15/32"-32 Thread Quantity: 1 1-Year limited warranty Note: Does not fit Pollak toggleswitches with nylon handles
You turn the key and everything responds right away, no second guessing, no delay. It keeps your start-up routine simple so you can stay focused on getting moving instead of chasing electrical issues.Highlights Four PositionSwitch: Controls off, accessory, run, and start functions. Threaded Stud Terminals: 10-32 posts create secure wire connections. 30 Amp Rated Capacity: Supports ignition and accessory electrical loads.
Powered A-frame jack automatically extends and retracts to your set height - no more holding a switch while the jack gets into position. Jack has 18" of screw travel. Drop leg provides 4-1/2" of additional lift. Includes 9" footplate.Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well.
Electric jack has a drop leg for 5-1/2" of lift on top of the 18" of screw travel. Large footplate minimizes sinking. Jack can be welded or bolted onto any A-frame trailer.Features: Tongue jack positions quickly and easily 12V Motor powers jack, eliminating need for hand cranking Built-in, water-resistant toggleswitch for easy operation Integrated circuit breaker prevents motor damage All-steel gears are strong and durable Drop leg provides an extra 5-1/2" of lift for added clearance Dual side lights make it simple to set up your camper at night Emergency, ratchet-style crank socket 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Grease access hole on the lower stem assembly allows access to grease the threaded rod which leads to a longer jack life Easy bolt-on or weld-on installation for A-frame trailers Hardware included Mounting holes fit 2" or 2-1/4" spacing Round footplate included Die-cast aluminum cap resists corrosion Sturdy steel construction with black powder coat finish Specs: Bracket height: 9-1/4" Retracted with drop leg retracted 27-1/4" Extended with drop leg retracted 32-3/4 Extended with drop leg extended Total lift: 23-1/2" Screw travel: 18" Drop leg travel: 5-1/2" Lift capacity: 3,500 lbs Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 6" Distance between mounting holes center to center: 3" 5-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
... Rust-resistant, die-cast aluminum cap and steel gears make for a long-lasting jack. Extends 6" in 25.3 seconds with 1,000 lbs of tongue weight.Features: Tongue jack positions quickly and easily 12V Motor powers jack, eliminating need for hand cranking Built-in, water-resistant toggleswitch for easy operation Integrated circuit breaker prevents motor damage All-steel gears are strong and durable 7-Way RV-style plug pulls power from your vehicle's trailer connector Great for trailers without batteries No need to manually wire for power Dual side lights make it simple to set up your camper at night Emergency, ratchet-style crank socket included 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Zerk fitting on the lower stem assembly allows access to grease the threaded rod, which leads to a longer jack life Easy bolt-on or weld-on installation for A-frame trailers Hardware not included Mounting holes fit 2" or 2-1/4" spacing Round, removable footplate included Die-cast aluminum cap resists corrosion Sturdy steel construction with black powder coat finish Specs: Bracket height: 9-1/2" Retracted 27-1/2" Extended Lift: 18" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 25.3 seconds Retracts 6" in 23.7 seconds Lift capacity: 3,500 lbs Outer tube diameter: 2" Inner tube diameter: 1-3/4" Footplate diameter: 6" 2-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
You turn the key and everything powers up the way you expect, no hesitation, no guesswork. It keeps your routine steady so you can focus on getting moving instead of dealing with another delay.Highlights Four Position Operation: Off, accessory, run, and start control in one switch. Seven Blade Terminals: Supports full ignition circuit connections.
You turn the key and the system responds the same way every time, no hesitation, no surprises. It keeps your start-up routine steady so you can stay focused on the work ahead.Highlights Four Position Operation: Off, accessory, run, and start control. Eleven Blade Terminals: Handles more complex wiring connections. Die Cast Metal Housing: One-piece body keeps internal parts aligned.
Mount this forged steel lunette ring and channel bracket on your trailer to get a strong attachment point for your pintle hitch. Heavy-duty adjustable channel bracket offers 3 mounting positions. Hardware is included.Features: Lunette ring is designed to couple with a pintle hitch Great for heavy-duty uses like construction, industrial towing, recovery, or demolition Channel bracket allows you to adjust the lunette ring's height to match different tow vehicles Holes on each side offer 3 mounting positions Bolt lunette ring to bracket with the 2 included bolts Adjustable channel bracket welds onto trailer Sturdy forged alloy steel construction Black powder coat finish resists rust and corrosion Specs: Lunette ring hole diameter: 3" Weight capacity: 24,000 1-Year limited warranty
... Hardware is included to mount the bracket on your trailer and to attach the 3" inner diameter ring to the bracket.Features: Lunette ring is designed to couple with a pintle hitch Channel bracket lets you adjust the ring's height to match different tow vehicles 4 Holes on each side offer 3 mounting positions Mounting hardware is included Heavy-duty construction - formed steel bracket and forged steel ring Bolt-on or weld-on installation Hardware included to bolt bracket on trailer Assembled in the USA Specs: Weight capacity: 12,000 lbs Inner diameter: 3" Outer diameter: 6-1/8" Channel bracket dimensions: 3-1/2" wide x 7-1/2" tall Mounting hole spacing: 2" apart on center 1-Year limited warranty
Filters
