5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.
Hey Bik; since the Dexter Hydraulic Trailer Brakes #23-336-337 are under 8k the correct psi is 1,000 lbs. Are you looking for an electric over hydraulic actuator? If so, you can use the Hydrastar Electric Over Hydraulic Actuator for Drum Brakes…
Since your trailer doesn't have a battery I am under the assumption that it has a 4-Way flat connection. Rather than installing a battery, battery box, and a 7-way with charge line circuit you can attach the 7-Way Molded Trailer Wire Connector…
Many times Dexter hubs will fit on a Lippert axle, but Lippert does have a few axles out there with special spindle sizes. Every Lippert axle comes with a tag or plate on the axle that gives a serial number or NV number. If you can give me that…
I sure can! The Lippert 1716 Pin Box #LC1324791 you were looking at measures 36.4" long and 14" tall as shown in the included diagram provided by Lippert.
I do have an option for you but we don't offer any replacement brake pads for the Tie Down Engineering (TDE) 46304 Caliper as the company is no longer in business. Therefore, our only option to you would be a full replacement for which I…
The Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators part #T4749501042 is designed for Titan Model 10 and 20 Surge Brake Actuators for disc brakes. If you have drum brakes you'll need to use the part #T2374600…
If you're looking for a new coupler to replace a Tie Down Engineering Model 20, I recommend the Demco Hydraulic Brake Actuator part #DM8204311 which like the Model 20 has a 20,000 lb weight capacity designed for a 2-5/16" hitch ball. It uses…
The backing plate is not available separately from the entire assembly for this part number. When the backing plate needs replacing, the other components need replaced as well. The B10EA-21 AxleTek 10" x 2 1/4" LH Self-Adjusting Electric…
The best way to power the interior lights in your trailer is with its own independent battery. You will not want to use the breakaway battery. The breakaway battery is only designed to operate the breakaway and will drain extremely quickly,…
You are correct in your description of how to wire in a new auxiliary battery in your enclosed trailer. You will take the 7-Way's 12V power feed and route this to the positive terminal on the auxiliary battery, and you will ground the second…
Filters
