Keep your battery ready between trips without overcharging or constant checks. This 4-amp onboard charger uses multi-stage charging and auto-maintain to protect battery life, while a powerinlet design keeps setup simple and flexible.It helps extend battery life while making sure it's ready when you need it. Simple Power Connection With a Built-In Inlet Running power to your charger shouldn't require extra wiring. The integrated AC inlet lets you plug in using a standard extension cord, giving you flexibility to connect shore power at home or at the dock without modifying your setup.
Designed for coolant systems with a 41- to 60-qt capacity. External tank heater connects to your engine block and radiator hose to circulate warm fluid in the cold. Allows cab to heat up faster, creates easier start-ups, and prevents frozen hoses.Features: Circulating tank heater preheats your engine block, heater core, and radiator in cold temperatures by heating coolant and circulating warm coolant throughout the system Allows cab to heat up and defrost faster Keeps hoses from freezing Assists with smoother start-ups Thermosiphon ensures that warm coolant is circulated throughout Internal thermostat automatically shuts heater off at 175 F to prevent overheating Allows safe operation overnight Die-cast aluminum tank is impact and corrosion resistant Maintains strength in high heat Molded into 1 piece to prevent any leaks Assists the flow of coolant with a tapered neck 5' Long HPN cord withstands high heat and resists oil Route NEMA 5-15 plug through your grille and plug into a standard 120-volt AC outlet or extension cord 6 Hose clamps, 1 Y-tube, 1 hose fitting, and mounting bracket included CSA certified Made in the USA Specs: Application: cooling systems with 41 - 60 quarts of fluid Wattage: 2,000 watts Amperage: 15amps Tank dimensions: Length: 7-1/2" Outer diameter: 2-1/2" Inlet/outlet dimensions: Length: 1-1/4" Outer diameter: 5/8" 1-Year limited warranty Notes: Do not use this heater with a 100-percent antifreeze solution.
Add or replace a 12-volt power socket on your RV or boat to charge your electrical accessories. Waterproof cap ensures a complete seal when not in use. Easy installation with included quick nut.Features: Add or replace a 12-volt power socket to charge your electrical accessories Perfect for RVs, boats, and off-road vehicles Waterproof cap protects against water damage Easy installation with included quick nut Spade terminals hardwire to 12V DC power source RoHs compliant Specs: Overall dimensions: 1-1/2" deep x 2-3/8" wide x 1-3/4" tall Distance between mounting holes (center to center): 1-7/8" Amperage: 15amps Voltage: 12V/24V 5-Year warranty
Replaces the 1' long removable power cord on your Kat's Heaters frost-plug-style engine block heater (KH11620). 90-Degree, molded end connects to heaters with 2-prong plugs. ... Features: Replaces the removable cord on your Kat's Heaters frost-plug-style engine block heater (KH11620) Also compatible with oil and coolant immersion heaters and other 120V block heaters that have 2-prong plugs Connects to heater with 90-degree, molded female end Routes through your grille and connects with 120-volt AC extension cord CSA approved Made in the USA Specs: Application: Kat's Heaters frost-plug-style engine block heaters Voltage: 120 volts Wattage: up to 1,800 watts Amperage: up to 15amps Cord length: 1' Gauge: 16 1-Year limited warranty
10' Power cord gives you extra length to plug in your Kat's Heaters frost-plug-style engine block heater. 90-Degree, molded end connects to heaters with 2-prong plugs. ... Features: Provides extra length to plug in your Kat's Heaters frost-plug-style engine block heater Compatible with 120V block heaters and immersion heaters that have 2-prong plugs Connects to heater with 90-degree, molded female end Routes through your grille and plugs into standard 120-volt AC outlet CSA approved Made in the USA Specs: Application: Kat's Heaters frost-plug-style engine block heaters Voltage: 120 volts Wattage: up to 1,800 watts Amperage: up to 15amps Cord length: 10' Gauge: 16 1-Year limited warranty
Replaces the 6' long removable power cord on your Kat's Heaters 240V frost-plug-style engine block heater for diesel applications (KH31502). 90-Degree, molded end connects with the heater's 3-prong plug.Features: Replaces the removable cord on your Kat's Heaters diesel frost-plug-style engine block heater (KH31502) Also compatible with other 240V block heaters that have 3-prong plugs Connects to heater with 90-degree, molded female end Routes through your grille and plugs into 240-volt outlet CSA approved Made in the USA Specs: Application: Kat's Heaters frost-plug-style engine block heaters Voltage: 240 volts Wattage: up to 3,600 watts Amperage: up to 15amps Cord length: 6' Gauge: 16 1-Year limited warranty
8' Long power cord gives you extra length to plug in your Kat's Heaters frost-plug-style engine block heater. 90-Degree, molded end connects to heater with 3-prong plug. ... Features: Provides extra length to plug in your Kat's Heaters frost-plug-style engine block heater Compatible with 120V block heaters that have 3-prong plugs Connects to heater with 90-degree, molded female end Routes through your grille and plugs into standard 120-volt AC outlet CSA approved Made in the USA Specs: Application: Kat's Heaters frost-plug-style engine block heaters Voltage: 120 volts Wattage: up to 1,800 watts Amperage: up to 15amps Cord length: 8' Gauge: 16 1-Year limited warranty
Replaces the 5' long removable power cord on your Kat's Heaters frost-plug-style engine block heater (KH30507, KH30502, KH30501, or KH30403). 90-Degree, molded end connects with the heater's 3-prong plug.Features: Replaces the removable cord on your Kat's Heaters frost-plug-style engine block heater (KH30507, KH30502, KH30501, or KH30403) Also compatible with other 120V block heaters that have 3-prong plugs Connects to heater with 90-degree, molded female end Routes through your grille and plugs into standard 120-volt AC outlet CSA approved Made in the USA Specs: Application: Kat's Heaters frost-plug-style engine block heaters Voltage: 120 volts Wattage: up to 1,800 watts Amperage: up to 15amps Cord length: 5' Gauge: 16 1-Year limited warranty
Serves as a direct replacement for the 6' long removable power cord that came with your Kat's Heaters 240V frost-plug-style engine block heater for diesel applications. 90-Degree, molded end connects to heaters with 2-prong plugs.Features: Replaces the removable cord on your Kat's Heaters diesel frost-plug-style engine block heater Compatible with 240V block heaters that have 2-prong plugs Connects to heater with 90-degree, molded female end Routes through your grille and plugs into 240-volt outlet CSA approved Made in the USA Specs: Application: Kat's Heaters frost-plug-style engine block heaters Voltage: 240 volts Wattage: up to 3,600 watts Amperage: up to 15amps Cord length: 6' Gauge: 16 1-Year limited warranty
When you're ready to get on the water, you want every battery ready too. This 3-bank charger keeps them topped off between trips with automatic charging and maintenance, so you can launch without checking each one.Built for a Three Battery Setup Systems with three batteries need consistent charging without extra steps. This is a 15-amp, 3-bank onboard charger for a 12/24/36 Volt DC system with a preset charging profile for Flooded (Lead-Acid) and Gel batteries.
Keep your 12V system charged and ready without adding another maintenance task. This 15-amp, 3-bank onboard marine battery charger delivers controlled multi-stage charging and long-term battery care, so you're not troubleshooting before launch.Supports Compact Battery Banks: 15Amps at 12 Volts DC supports battery capacity up to 150 Ah. Features to know about Charge Goes Where It's Needed When one battery bank is drawn down more than the others, fixed-output chargers can leave the system uneven and harder to trust.
Submersible, on-board smart charger draws power from a wall outlet to charge and maintain up to (3) 12V batteries at 5-amps. Fully-sealed, waterproof construction is ideal for marine applications. ... Features: On-board AC-to-DC smart charger quickly charges and maintains up to 3 batteries Perfect for boats, trolling motors, generators, electric vehicles, and industrial equipment 3 Battery banks allow multiple 12V batteries to be charged simultaneously Provides full charge output even with low or varying AC current input Multiple battery profiles let you charge a variety of battery types 12V Modes - normal, AGM, and lithium-ion, Force mode - charge dead batteries below 1-volt Multi-stage charging algorithm charges 2x faster than traditional chargers without overcharging Analyzes battery condition to provide a customized charge Built-in battery desulfator restores lost battery capacity Heavy-duty 3/8" eyelet connectors provide maximum contact with terminals Built-in 7.5-amp fuses protect electronics from dangerous overloads Completely sealed, waterproof design is fully submersible - perfect for marine applications Tested to resist saltwater corrosion AC port plug (sold separately) creates a connection point for easy access to AC power Specs: Application: 12V batteries up to 120 amp-hours Battery types supported: wet cell, gel cell, AGM, enhanced flooded, maintenance-free, and Lithium-ion Lithium-ion batteries must have battery management systems (BMS) Number of battery banks: 3 Maximum charging amperage: 15amps 5 amps per battery bank Eyelet cable length: 72" AC cable length: 72" Working voltage: 120 - 240 VAC (50 - 60 Hz) Maximum power consumption: 220 watts Low voltage detection rating: 1-volt IP rating: 68 Dimensions: 7-15/16" long x 6-1/2" wide x 2-1/4" thick Weight: 5.76 lbs 3-Year limited warranty The rugged NOCO Genius GEN series on-board smart charger quickly charges and maintains up to (3) 12-volt lead-acid and lithium-ion batteries, simultaneously.
Leave your battery plugged in during storage without guessing what it's doing. This 12V AC charger uses built-in Bluetooth for live charge data and programmable settings, so you can check real charge status instead of relying on LED indicators.Recover Deeply Discharged Batteries: Initiates charging from 0V and reconnects Li-ion with BMS disconnect. Consistent 15Amp Smart Charging: 6-stage adaptive algorithm optimizes output based on battery use patterns. High Efficiency With Low Heat: Up to 94% efficiency reduces heat and power use at full charge.
When your 12V alternator barely moves a 24V house bank, this DC to DC charger steps input up to a 24.2V nominal output. Its isolated design separates input and output grounds, so the battery charges correctly instead of sitting partially charged.You can scale the system over time instead of replacing it when power demand grows. Specs Electrical: Continuous output current at nominal output voltage: 15amps Continuous output power: 360 watts Input voltage range: 8V to 17V Output voltage adjust range: 20V to 30V Nominal output voltage: 24.2V Under voltage shut down: 7V Efficiency: 88 percent Environmental and Protection: Operating temperature range: -4ºF to 131ºF IP rating: IP43 (electronic components) and IP22 (connection area) Dimensions and Weight: Dimensions: 5-1/8" tall x 7-5/16" wide x 3-3/16" deep Weight: 4 lbs Warranty: 5-Year warranty
Leave your stored battery plugged in without wondering if it's slowly losing ground. This 12V charger uses a 7-stage charging algorithm and storage mode to adjust charge levels over time, so the battery stays maintained between trips.SafetyShield+ protection adds IP65 water, dust, and chemical resistance, along with safeguards against overheating, short-circuit, and reverse polarity. That gives you a 15amp charger that can stay in harsher storage conditions while continuing to charge and maintain the battery. Specs Charging Output: Charge current: 15amps Charge current on LOW: 4 amps Voltage: Input voltage: 100 VAC to 130 VAC Minimum battery voltage: starts charging from down to 0V Efficiency and Power Consumption: Efficiency: 94 percent Standby power consumption: 0.5 watts Environmental and Protection: Operating temperature range: -40ºF to 140ºF IP rating: IP65 Connection: 120V AC connection with 5' 10" cable and US NEMA 1-15 plug Dimensions and Weight: Dimensions: 2-3/8" tall x 4-1/8" wide x 7-1/2" deep Weight: 4.2 lbs Warranty: 5-Year warranty
Keep your battery ready between trips without overcharging or constant checks. This 4-amp onboard charger uses multi-stage charging and auto-maintain to protect battery life, while a powerinlet design keeps setup simple and flexible.You can leave it connected and come back to a battery that's ready instead of troubleshooting before heading out. Simple Setup With Built-In Power Cord Getting power to your charger shouldn't slow you down. This unit comes with an integrated AC power cord, so you can plug into a standard outlet without adding extra components.
Designed for coolant systems with a 41- to 60-qt capacity. External tank heater connects to your engine block and radiator hose to circulate warm fluid in the cold. Allows cab to heat up faster, creates easier start-ups, and prevents frozen hoses.Once the tank is mounted and all lines are properly connected, run the power cord out through your grille so that it can be plugged into a 120-volt outlet or extension cord.
Keep your trailer battery charged with this dual-input smart charger. Installs in your trailer and pulls power from your vehicle battery or rooftop solar panel to charge your auxiliary battery. Ideal for travel trailers or other enclosed models.Features: DC-DC charger, an MPPT solar regulator, and a smart battery isolator all packed into one compact, lightweight unit Dual-input system combines a 12A tow vehicle charger and a 40A solar regulator for simplified, enhanced power management 40A solar regulator feeds your off-grid adventures, with a longer and more reliable charging capability DC-to-DC battery charger draws power from your vehicle to power up the auxiliary battery on your enclosed trailer as you travel Ideal for smaller battery banks rated less than 75 amp-hours Uses your 7-way plug to pull power Multi-stage charging algorithm ensures a complete charge on secondary battery without overcharging Boost stage - provides a constant charge while monitoring auxiliary battery voltage Absorption stage - keeps voltage stable to avoid overcharging while bringing battery up to 100-percent charge Float stage - maintains charge on auxiliary battery Fault recognition technology prevents damage to batteries from voltage spikes, overheating, and reverse polarity connection Battery isolator function prevents charger from pulling power from start battery when vehicle is off Green Power Priority algorithm ensures solar is prioritized when both systems are available Unit has profile and status LED indicators for confident set up Combine with the Redarc Smart Battery Monitor (sold separately) and RedVision smartphone mobile app to keep an eye on battery levels Unit must be mounted in the interior of an enclosed trailer Cables, fuses (RED76FR and RED86FR), and connectors sold separately Made in Australia Specs: Application: 12V or 24V vehicle systems with standard or smart alternators, plus 12V, 40 amp solar input Battery types supported: AGM, gel, standard lead acid, calcium, and lithium ion (LiFePO4) batteries 7-Pin tow vehicle plug connector can be used Continuous vehicle rating: 12 amps Continuous solar rating: 40 amps Overall dimensions: 6-1/2" long x 4-3/4" wide x 1-1/2" tall Maximum charging voltage: 15.3V Output voltage: 12V DC Output power: 12V vehicles: 147 watts 24V vehicles: 294 watts Output current rating (continuous): 11 amps Input current (maximum): 12 amps Weight: 2 lbs 2-Year warranty
Charge your phone, GPS or other USB device from your motorcycle or ATV's battery. Kit includes battery lead to SAE connector to battery monitor to USB port. Built-in protection turns off USB charging when vehicle is parked.Features: Battery to USB charger kit lets you power your USB devices and keep an eye on your battery status 80" Cable can be routed from battery to where power is needed - handlebar, tank bag, or pannier 3.3 Amp charger adapts to connected device for safe charging USB port stops charging when vehicle is in park to protect your battery Battery monitor displays status with blinking LEDs USB port easily zip-ties to mounting location Includes weatherproof cap to seal USB port when not in use Kit includes battery lead with in-line 15-amp fuse to SAE cable, and SAE to battery monitor to USB cable Specs: Input: 12V AGM or 12.8V lithium battery Charging amps: 3.3 @ 5 volts Length: 80" 3-Year limited replacement warranty
Compact smart charger draws power from a wall outlet to charge, test, and maintain batteries. Great for cars, trucks, motorcycles, RVs, light aircraft, and boats. Saves sulfated batteries as low as 0.5V. ... Features: AC-to-DC smart charger quickly charges and maintains a battery Perfect for charging a car, truck, SUV, motorcycle, tractor, RV, light aircraft, or boat Multiple battery profiles let you charge a variety of lead-acid battery types 8-Step charging algorithm automatically charges and maintains without overcharging Analyzes battery condition to provide a customized charge Built-in battery desulfator restores lost battery capacity Tests automatically and indicates if there is a battery problem Ampmatic charge determines your battery size and adjusts the charging current to suit your battery Temperature compensation adjusts voltage higher when colder and lowers voltage when hotter Battery clamps provide a quick, easy way to connect to your battery Eyelets let you make a secure connection to your battery terminals 15-amp fuse protects electronics from potential short circuits Zip tie slits allow easy fastening to vehicle SAE connector with weatherproof seal and cap keeps out dirt and water Simple operation with LED lights that indicate charging status Auto-memory feature remembers the last selection if power is lost Durable, weatherproof case includes wall mounts, 6' AC supply lead, and 6' charge lead with SAE connector Specs: Application: 12V batteries from 3 to 400 amp-hours 24V batteries from 1 to 200 amp-hours Battery types supported: flooded, AGM, gel, Ca-Ca (lead calcium), and deep cycle Maximum charging amperage: 12V at 10 amps 24V at 5 amps Cable lengths: Battery clamps: 20" Eyelets: 20" AC power: 6' Charging cable: 6' Input voltage: 100 - 240 VAC (50 - 60 Hz) Low voltage detection rating: 0.5 volt Lowest operating temperature: -40 F (-40 C) 3-Year limited warranty
Compact smart charger draws power from a wall outlet to automatically charge, test, and maintain batteries. Great for cars, trucks, RVs, golf carts, and ambulances. ... Features: AC-to-DC smart charger quickly charges and maintains a battery Perfect for charging a car, truck, SUV, motorcycle, RV, golf cart, or ambulance Multiple battery profiles let you charge a variety of lead-acid battery types at different voltages Ideal for 6V and 12V deep cycle and starter batteries 8-Step charging algorithm charges and maintains without overcharging Analyzes battery condition to automatically provide a customized charge Built-in battery desulfator restores lost battery capacity Tests automatically and indicates if there is a battery problem Battery clamps provide a quick, easy way to connect to your battery Eyelets let you make a secure connection to your battery terminals 15-amp fuse protects electronics from potential short circuits Zip tie slits allow easy fastening to vehicle SAE connector with weatherproof seal and cap keeps out dirt and water Simple operation with LED lights that indicate charging status Durable, weatherproof case includes wall mounts, 6' AC supply lead, and 6' charge lead with SAE connector Specs: Application: 6V batteries from 3 to 160 amp-hours 12V batteries from 3 to 120 amp-hours Battery types supported: flooded, AGM, gel, SLI, and deep cycle Maximum charging amperage: 6V at 4 amps 12V at 3 amps Cable lengths: Battery clamps: 20" Eyelets: 20" AC power: 6' Charging cable: 6' Input voltage: 100 - 240 VAC (50 - 60 Hz) Low voltage detection rating: 0.5 volt IP rating: IP54 Lowest operating temperature: -40 F (-40 C) 3-Year limited warranty
Compact smart charger draws power from a wall outlet to automatically charge, test, and maintain batteries on cars, motorcycles, racing vehicles, RVs, and boats. Saves batteries as low as 0.5V. ... Features: AC-to-DC smart charger quickly charges, tests, and maintains a battery Perfect for charging a car, motorcycle, racing vehicle, RV, and boat 10-Step charging algorithm automatically saves, charges, tests, and maintains without overcharging Analyzes battery condition to provide a customized charge Tests automatically and indicates if there is a battery problem Adjusts voltage based on temperature Push button BMS wake up mode safely wakes battery out of sleep mode Battery clamps provide a quick, easy way to connect to your battery Eyelets let you make a secure connection to your battery terminals 15-amp fuse protects electronics from potential short circuits Zip tie slits allow easy fastening to vehicle SAE connector with weatherproof seal and cap keeps out dirt and water Simple operation with LED lights that indicate charging status Durable, weatherproof case includes wall mounts, 6' AC supply lead, and 6' charge leads with SAE connectors Specs: Application: 12V and 16V batteries from 2 to 120 amp-hours Battery types supported: LiFePO4 (lithium-iron phosphate) Maximum charging amperage: 5 amps per bank Cable lengths: Battery clamps: 20" Eyelets: 20" AC power: 6' Charging cable: 6' Input voltage: 100 - 240 VAC (50 - 60 Hz) Low voltage detection rating: 0.5 volt Lowest operating temperature: -4 F (-20 C) 3-Year limited warranty
... We recommend this one for vehicles with alternators generating 40 amps of excess power.Features: Battery charger provides charge to a battery bank in an RV or overlanding vehicle Prevents sulphation in your battery, extending service life Works great with smart alternators and EURO 6 emission standard vehicles Multi-phase charging profiles prevent hazardous overcharging Does not drain your vehicle battery when engine is not running DIP switches can be configured for using lead, gel, AGM, or lithium batteries Specs: Application: 12V vehicle systems with standard or smart alternators Battery types supported: AGM, gel, and lead acid Input voltage: 12V Output voltage: 12V Output current: 40 amps Continuous power: 500 watts Operating temperature -4F to 122F Overall dimensions: 10-1/4" x 6" x 2-7/8" Weight: 4 lbs
This smart trickle charger helps prevent battery fade after storage. It manages charging and recovery automatically, shows what's happening on a clear display, and works across common battery types so you can connect it and move on.Specs Electrical & Charging: Battery voltage compatibility: 6V and 12V Output current: 7.2 amps Charging stages: 11-stage smart charging cycle Battery capacity range: 2-230 amp hours Compatibility: Battery types supported: Lead acid, flooded, AGM, gel, lithium, and similar chemistries Applications: Marine, automotive, and motorcycle batteries General: Weather resistance: IP65 rated Cables with clamps included Warranty: 3-year limited
Filters
