Trailer Hitch Receiver Tube Drop on the B&W Hitch Part # BWHDRH25198 and Curt Hitch Part # C15511
Heavy-Duty Trailer Hitch Receiver part # BWHDRH25198 is around 7-3/8". The distance from the top | trying to find out the from the frame to the top of the reciever tube on theses two item b and w hdrh25198 curt...
Fit of Curt Class V Receiver Part # C15300 on 1992 Ford F250 with 10 Inch Drop Aftermarket Bumper
According to my contacts at Curt Manufacturing, the Class V Receiver you referenced, part # C15300 | I have a 1992 Ford F250 with a 10 inch bumper. Will the Curt p/n C15300 trailer receiver hitch fit? | According...
What Parts are Included in the TorkLift Camper Tie-Downs # TLR3501?
I received my rear tie downs for a 95 F350. As usual the service was very good. I got six parts | I received my rear tie downs for a 95 F350. As usual the service was very good. I got six parts total not including...
Which Trailer Hitch for a 1996 Ford F-250/F-350 Fits Tightest Under the Bumper
to the bottom of the bumper is the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25122 which measures 5 | if you have this information in your spec sheets i would be happy if you could provide it. im...
Availability of Class IV or Class V Hitch Receivers for 1996 Ford F-250/350 With Bucket Truck Frame
We do have a Class IV trailer hitch receiver from Curt, part # C14082, that is confirmed to fit | I am wonder about your class 4 and 5 reciever hitches. my question is if they will bolt up to a 1996 Ford bucket...
Ground Clearance Curt Front Hitch 31310 on 1996 Ford F-350
the top of the receiver tube will sit about one inch below the underside of the bumper. This would put | Im wondering what the clearance will be on a front hitch installed on a 96 Ford F350 7.3 Diesel. Thanks | We haven't...
Recommended Trailer Hitch for Ambulance on Ford Chassis
Ultra Frame Service Body Trailer Hitch Receiver part # 41990-16 which is a universal hitch that can | I have an ambulance built on a 1992 F-350 chassis. I need at least 6 inches of from the bottom of my frame...
Rating of the Tow Loops on the Curt Front Hitch # 31311
I see the hitch rating for the 2inch receiver, but I cannot find any documentation on the rating | I see the hitch rating for the 2inch receiver, but I cannot find any documentation on the rating for the tow loops on either...
How Wide is the Hitch Tube on the Buyers Class 5 Service Body Hitch Receiver
The Buyers Products Class 5 Service Body Hitch Receiver - 2-1/2" part # 3373018538 Does in fact | What is the width of thus hutch tube. I assume 44 Thanks | The Buyers Products Class 5 Service Body Hitch Receiver...
Trailer Hitch Receiver Fit For 1995 Ford F-350 Cab & Chassis
Can I get a part # for the Ford f350 cab and chassis 1995 model? Ive looked at several hitches | Can I get a part # for the Ford f350 cab and chassis 1995 model? Ive looked at several hitches having a little trouble finding...
Replacement Weight Distribution Shank to Provide More Height Rise or Drop
linked the same parts for a 2-1/2-inch receiver size in case that is what is on your truck | Have a curt 17500 weight distribution hitch need one and a half inch more | If you are referring to needing more...
What Are The Correct Dimensions Of The Buyers Products Fender Guard Mud Flaps, # 337B1020PPB
Buyers B1020PPB? The reason I ask is that they differ from the drawing I received from Buyers Products | Hi! Wondering how certain you are of the measurements made in the video attached the these flaps Buyers B1020PPB? The...
Does Curt Trailer Hitch # C15511 Fit 1996 Ford F250 XLT with Deep Drop Bumper
Will the Curt 3-Piece Trailer Hitch Receiver # C15511 fit my trucks frame. I already measured | Will the Curt 3-Piece Trailer Hitch Receiver # C15511 fit my trucks frame. I already measured the of the bumper at 5.5 inches from...
1995 Ford F-450 Superduty Cab and Chassis Hitch Recommendation
Will this fit a 1995 Ford F450 Cab and Chassis or is there a compatibly sized receiver | Will this fit a 1995 Ford F450 Cab and Chassis or is there a compatibly sized receiver for this truck? | The best option we are going to...
Which Curt Front Hitch Fits 1993 Ford F-250 Diesel
Does front receiver hitch 31311 work for a 1993 f250 diesel? | Does front receiver hitch 31311 work for a 1993 f250 diesel? | If your 1993 Ford F-250 diesel is a 2 wheel drive then yes the # 31311 is a fit. If you have a 4 wheel...
Troubleshooting Excessive Movement After Towing with Adjustable Aluminum Ball Mount # DTALBM7000
7000 Ball Mount now has lots of slop in the receiver, both forward and backward, as well as, side | Using DTALBM7000 Ball Mount upside-down to meet connection height of heavy approx. 9,200# Arctic Fox 32 travel trailer with...
Recommended Trailer Hitch For 1996 Ford F-250 With 8 Inch Step Bumper
I have a 1996 F250 Powerstroke with a Luverne 8inch bumper. Do you have a Class IV 2inch receiver | I have a 1996 F250 Powerstroke with a Luverne 8inch bumper. Do you have a Class IV 2inch receiver hitch that will fit this...
Class V Hitch Recommendation for a 1996 Ford F-350
We offer several classes of hitch receiver for the 1996 F-350 and the particular version | I am looking for a class V hitch for my 96 F-350. My frame rails measure 34 inches outside to outside what hitch do you recommend? |...
Does the Draw-Tite Front Hitch Part # 65015 Require Bumper Removal 1993 Ford F-250/F-350
The Draw-Tite Front Mount Trailer Hitch Receiver part # 65015 which is a fit for your 1993 Ford F | Does the front bumper have to come off to install this hitch and then reinstall the front bumper? Will this...
Recommended Gooseneck Trailer Hitch for a 1997 Ford F-250
and Store Underbed Gooseneck Hitch part # C60723. This gooseneck hitch is a custom fit so no drilling | I am very new to this process of gooseneck installation. How do I know which products will work on 1997 f250? | The gooseneck...
Different Bolt Hole Sizes on Reese Pintle Mount, Part # RP45294, and Holland Pintle, Part # PH30RP
I just received the Reese titan forged pintle mount and the bolt holes and nut reliefs are for 5/8 | I just received the Reese titan forged pintle mount and the bolt holes and nut reliefs are for 5/8 bolts. The Holland 15 ton...
Is There a Sleeve For my 2-1/2 inch Ford F350 Super Duty Hitch So I can Use 2 Inch Accesorries
My new SuperDuty F-350 with factory tow package has a 2 1/2 inch by 2 1/2 inch receiver hole. My | My new SuperDuty F-350 with factory tow package has a 2 1/2 inch by 2 1/2 inch receiver hole. My old hitch is 2x2. Do I buy...
Correct Weight Distribution Shank to Provide 1-1/2 Inches of Drop
Witch Reese Weight Dist Shank Do I Need If From Ground To Top Of Receiver Is 19 And Ground To Top | Witch Reese Weight Dist Shank Do I Need If From Ground To Top Of Receiver Is 19 And Ground To Top Of Trailer Coupler Is 17 1/2...
What is the Height of the Curt Trailer Hitch Mounted Spare Tire Carrier I have 20 inch wheels
At this time we do not have a picture of the Spare tire rack, part # c31006, in use, but I can tell | Do you have a picture of this tire carrier mounted on a vehicle? Also, how tall is the unit? I have 20 tires, and cannot have...
Filter Your Search
Contact and Help