Search: 12v switch   >  

Hey Scott you will need to get the width of your ramp as well as the weight of the ramp to pick out what you'd need. For example the part #M394FR is for 8 foot wide ramps and has a weight capacity of 185 lb. I attached a link to all of the…

I do have an option for you but we don't have a roof vent cover that would fit over the MaxxFan Deluxe Roof Vents like part #MA00-07500K since it already has one built-in. If you want to use a separate large roof vent cover like the MaxxAir II RV…

When installing the MaxxFan Roof Vent w/ 12V Fan #MA00A04301K, there is not a required butyl tape width. You just need to ensure that the butyl tape covers the screw holes. The Alpha Systems Butyl Tape for RV Weatherproofing #AL33FJ is 3/4" wide…

Thanks for the picture! The Optronics Flexible LED Light Strip item #UCL90CB is extremely versatile. It will connect to any 12-volt power source so I am sure whatever power source and switch your lights are currently running off of will work with…

The TecNiq Industrial LED Scene Light #TN43XR has 3/16" diameter mounting holes spaced 16" apart on center (see attached).

The 12V wire at the vehicle-end trailer connector being hot even when the truck is off can vary depending on the application. For all aftermarket hardwiring installations of a 7-Way wiring harness, the 12V wire will be hot at all times, even when the…

Yes, we have the Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads #PK34513 that would be perfect for controlling your 12v light.

We do have some 12V LED lights that are able to be dimmed like the Gustafson 12V RV LED Puck Light - Surface Mount #277-000342 which is compatible with a dimmer switch like the RV LED Light Side-Slide Dimmer Switch #37205-12325 for white or the RV…

The Fulton F2 Swing-Up Trailer Jack #F1413040134 (as well as other F2 jacks) has that plastic piece that as you referenced is #9 in the exploded diagram. I reached out to my tech contact at Fulton and unfortunately that is not a replaceable part. You…

The shanks on the back of the D&W Inc. Spray-Away RV Exterior Hose Hookup w/ Shower Valve #PF247701 that you referenced are male NPSM fittings so you'd connect to them with a female NPSM connector.

The first thing I would check on your trailer is the capacity of the springs. You need to be sure the spring capacity is rated at 1/2 the axle capacity. That way 2 springs equal the capacity of the trailer axle for proper fit. Check the arch of the…

It is highly recommended that the spring seat be at minimum tack welded to the axle. There have been issues that have resulted from the seat not be welded to the axle. If you do not have access to a welder, I recommend taking the trailer to a local…