Is the Gustafson RV Eyeball Light 12 Volt
Is this a 12v product? | The Gustafson RV Eyeball Light part # 277-000600 is indeed 12 volt powered as are almost all our interior lights. |
Replacement Repair Parts for Older Roadmaster Sterling Tow Bar
I have an older Sterling tow bar- the only numbers that I could see was 02RNBL2882? is this the serial number? I want to rebuild the bar, there may have been a sticker that has come off. Any way the only other identification is that its...
Trailer Lights Wont Work with Headlights On
I have a 1994 Toyota pickup. Some years ago I had a Hoppy electronic taillight converter, #310-0041-560 installed. I have only towed a friends 4-pin trailer a couple of times in daylight. The stop and turn signals work fine during daylight....
Is There a Hitch for a 1991 Toyota Hiace Super Custom LH107
I need to find a tow bar that will fit a 1991 toyota hiace super custom van. I saw a post about a universal one for a customer with a toyota hiace rv, but Im not sure if that would work? Can you help? | As long as the van features a box, C-channel,...
Weight Distribution Recommendatino for Towing 3,500 lb Trailer
just bought used coleman 15BH travel trailer with empty wt of 2800lb and max weight of 3800 lb- towing with my 95 toyota pickupwith a tow rating max of 3500lbempty weight of 3480 lb and max weight of 7000 lb | If the trailer you plan on towing...
Troubleshooting 4-way Connector On 1992 Toyota Pickup Having Power But Not Powering Trailer Lights
I own a 1992 Toyota pickup 4WD V6 I dont think is a T100 model. I installed the Curt hitch for this pickup model, however, the T-Connector and the trailer lights are not communicating. When I connected it for the first time the turning lights...
Using Spacers to Install CURT Trailer Hitch # E-3S on a Step Bumper
The ball sleeve that goes through the bumper protrudes below the step-bumper about 1/8 and interferes with full surface hitch to underside of bumper contact. Is this a problem? | The CURT Step Bumper Trailer Hitch, # E-3S, comes with some square...
Does K-Source Replacement Side Mirror # KS70003T Come With Etrailer Printed on Glass
Hello, Could you please answer a couple follow-up questions: 1 Is the bold etrailer I see in the lower right-hand corner of the mirror there permanently, or can it be removed? 2 I would be installing—not replacing—this mirror my truck doesnt...
1986 Toyota Truck And Camper Chassis Air Bag System Options
We have a 86 toyota cab and chassis truck,factory built camper. Looking for an air bag system to level the truck and carry the load. What do we need. | You need the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers...
Parts Needed to Flat Tow a 1996 Nissan Pickup Truck Behind a Motor Home
What tow bar do you recommend and what parts are needed? Ill be towing it behind a motor home. | To flat tow a vehicle behind a motor home you will need base plates, tow bar, safety cables, lighting, and supplemental braking. For a 1996 Nissan...
1976 Toyota Pickup With 20R Engine Catalytic Converter Compatibility
76 Toyota p/u 20R need converter, I punch it in an you guys come with a converter for a 2.2 or 2.4. | The 1976 Toyota Pickup with the 20R engine is a 2.2L engine. For your 1976 Toyota Pickup I recommend the MagnaFlow Stainless Steel Catalytic...
No Brake Lights After Wiring A 1989 Toyota Pickup and Trailer
Installed a 4-way on my trailor that I tow with a 1989 Toyota pickup. The right and left signals, tail lights, and flashers all work. No brake lights however. Checked all connections. Any suggestions? | It sounds as if you may have wired...
Availability of a Trailer Wiring Harness To Fit A 1986 Nissan D21 Hardbody Truck
I have a 1986 Nissan 2wd hardbody D21 6cyl pickup. I bought a 5x10 utlility trailer that is already wired, however my truck is not. Im trying to find a connector pigtail to where I dont have to splice the wires on my truck to the trailer. Is...
Wiring Harness for 1993 Toyota Pickup
I have part#43315 for tow wiring for my Toyota pickup 1993 you it fit my Toyota | The Hopkins 4-pole trailer wiring harness kit # HM43315 that you mentioned fits the 1993 Toyota pickup and also the following vehicles: 1989 - 1992 Toyota Pickup 1996...
Replacement Hitch for 1991 Toyota Pickup Truck
Hello Im inquiring about aa hitch i have that the plates on the side of the hitch that connect the recepticle to the frame have cracked they bolt to the recepticle so im thinking they can be replaced its for a 91 toyota p/u. i dont see...
Bumper Fits for 1997 Nissan Pickup Truck
I got a Nissan hardbody two wheel drive pickup What bumper fits this truck? | We do have a couple of different options for bumpers that fit your 1997 Nissan pickup, both of which are from Westin and both of which come with mounting brackets....
Is Erickson Side-Mount Truck Bed Ladder Rack Sold in Pairs
Hi, Im wondering if this purchase is for a pair or single bracket? If not a pair, then Im looking or so to buy a pair right? Thanks | The Erickson Side-Mount Truck Bed Ladder Rack # EM07708 is sold as pair. You'd get the two uprights needed...
Replacement Rear Bumpers for a 1982 Toyota Pick Up Truck
is it original | The bumpers that we carry for the 1982 Toyota pickups are not exact OEM matches. Westin does not offer a Perfect Match brand bumper for the 1982 Toyotas. The bumpers that are available, see link, are the closest match to the...
Replacement Vent Lid Cover for 3-Point Hinge Style Vent
I am trying to figure out what lid fits this hinge on my camper. Thank you. | The replacement lid for your vent is part # CAM40153. I have attached a photo sent in by customer who purchased this lid and has the same hinge style that you have. |
Trailer Wiring Harness for a 1993 Toyota Pickup Truck
What converter/harness do I need for a 1993 Toyota pickup | For a 1993 Toyota Pickup, the correct trailer wiring harness is # 118379. I have included a link to the installation instructions and a link to a video showing a typical installation. If...
Trailer Wiring Harness Recommendation for a 1981 Toyota Pick Up 4x4 and LED Trailer Lights
Do i need #rm-732 to make this work is there a cheeper way?more wiring? thanks so much. 81 toyota pick up 4x4 wiring harness for trailer led lights | For your 1981 Toyota Pickup you will need to first determine whether or not you have combined...
Will the Bestop 2-Piece Soft Doors # B5177415 fit a 1972 Toyota FJ40 Hardtop
will the bestop soft door fit with my hardtop thanks Kent. | Yes, I checked with Bestop and the Bestop 2-Piece Soft Doors # B5177415 have been confirmed to fit your 1972 Toyota FJ40 with a hard top. I attached a set of installation instructions...
Wiring a 1994 Toyota Pickup to Tow Behind a Motorhome
I have a 1994 toyota pickup that I want to tow behind my motorhome. How can I run the lights from my motorhome plug into the plug on my pickup to use my pickup tail lights? I am tired of the magnetic lights falling off. Thank you very much for...
Solution for HappiJac Truck Camper Jack That Needs Rebuilt
Is there a way to rebuild this jack | We have replacement legs for the HappiJack truck camper systems like the part # LC736515 which has 36-1/2 inches of lift and a 2,800 lb capacity as well as the # LC736514 which has 34-1/2 inches of lift...
Filter Your Search
Contact and Help