Summer Starts Here - Save up to 70%
Replacement Legs for Landing Gear on 2008 NUWA Hitchhiker
We have a 2008 NUWA Hitchhiker,, each landing leg has its own electric motor, wired to its own operating switch. My legs are 29 1/2 inch long and punch out from the top is 6 3/4 and from the bottom is 5 1/4 do I need two LG179013 legs? Thanks...
What Does Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR Weigh
What is weight of cover for 35ft 5th wheel? | The Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR that you referenced weighs 44 lbs. |
Tips for Rolling the Rear Crossmember on the B&W Turnoverball Over the Shock Mount on an F-350
Have the 1108 kit for f350. Rails wont roll over and pass my shock mount so i can slide it back and begin the process... | If you take a look at the attached install video we did of the B&W Turnoverball Underbed Gooseneck Trailer part # BWGNRK1108...
Brightest Interior Trailer Light Recommendation
I would like to change out my existing over head trailer dome lights with led ones so they are brighter. What are the brightest ones you carry? | For maximum brightness out of an interior trailer light I would go with the part # ILL08COB. The...
Best Way to Use Two Different Weight Distribution Systems for Different Weight Trailers
The tongue weight of a TT toy hauler I plan on buying will be in the 10K-13K range max 14K. I am looking at the RP66130. Prefer cams over friction pads. Assuming the RP66130 is a good choice, here is my real question. I also want to tow...
Replacement Nev R Lube Bearing Kit Recommendation for Trailer with Hub/Rotors # K2HR79XLDE
I have a trailer wheel bearing on Kodiak XL-Lube disc brake kit part number K2HR79XLDE running a little hot. When eTrailer installed this kit in August 2017 I assumed that they used Nev-R-Lube 031-071-03 but it now appears that I assumed wrong....
Are There Any Microwave/Exhaust Fans That Will Fit My 2005 NuWa Discover America Fifth Wheel
We need to replace our microwave and fan combo. It is 23 1/2 inches wide by 19 inches tall. The unit we have is an Apollo which I understand is no longer made. | I checked the microwave/exhaust fans that we carry as well as our vendors, Way...
Is the Replacement Hub Clamp Bolt # ERT052 Stainless Steel
Are these stainless | Yes, the Replacement Hub Clamp Bolt # ERT052 is stainless steel. |
What is Needed to Install the Hopkins Smart Hitch Backup Camera and Hitch Aligner System
I am interested in Hopkins Smart Hitch Backup Camera and am wondering if there is any thing more I need to install this in a 2012 f350 super duty truck? | The Hopkins Smart Hitch Backup Camera and Hitch Aligner System part # HM50002 comes with...
Recommended Hitch for a 1956 Ford F-100
Looking for a trailer hitch that will fit my 1956 Ford F100. The outside width of the frame rails is 34”. So something that will bolt up to that will probably work. Thanks, Donn | We don't have any custom fit hitches for a 1956 Ford truck...
Rear View Backup Camera Compatible With Ford Rear View Mirror Plugs
Hi I was wondering if you could suggest a good backup camera I have a 2016 ford f250 xlt crew cab it has the self dimming mirror is there a kit with camera and a mirror I can buy like a plug and play Im sure theres pig tails on the wire harness...
Controlling Sway on A-Frame Trailer with 20-1/2 Inch Straight Tongue
Im looking for a weight distribution hitch for pulling a pontoon behind a truck camper. I would like it to allow backing up and have sway control. The problem I see is that my trailer has a straight tongue for the first 20.5 inches and then...
Why Are Service Body Trailer Hitches Not Rated for Weight Distribution Systems
I recently purchases a draw tite ultra frame service body trailer hitch v-2inch weld on rated for 16,000 and 1600 and I need a weight distribution hitch for my trailer. I noticed after installing that the instructions say not for weight distribution...
Weight Distribution Recommendation for 37 foot Forest River XLR 29KW Toy Hauler
Im buying a 37ft Forrest River XLR 29kw toy hauler with a hitch weight of 1515lbs. Im going to be pulling it with a 2016 F250 6.7 Powerstroke class 5 with 2 1/2 reciever. Not sure what all the weights will be loaded down and Im going to pick...
Parts Needed to Install 7-way and 4-Way Connector in 2001 Ford F-350
I am looking for a tow package wiring harness for my 2001 Ford F-350 V10. I found the Ford Replacement OEM Tow Package Wiring Harness, 7-Way Super Duty with code 118243 which has the correct connection but I was wondering if you have one that...
Will a Reese Weight Distribution Shank Work with a Curt Weight Distribution System
I currently have Curt part #17300 and need more of a drop than the current shank will allow. I was wondering if this shank was compatible with part #C17307 that I have with my current setup. | The Reese weight distribution shank # RP54970 has...
Compatibility of Wheel Masters Airless Inflation Kit # WM80092 with Tire Pressure Monitoring Systems
Is it possible to use a TPMS sensor on this? If not, do you have another solution? | According to my contact at Wheel Masters, the 80092 wouldn't be compatible with TPMS systems, because there's no air in the tube. Using a regular extension...
Can Trailer Tire Size 205/75-15 be Replaced with 225/75-15
Have 205/75 15 on camper can I go to 225/75/15 ?Wonder about width. | When trying to upgrade to different sized tires, you will need to be aware of both width and height clearances between the new tire size and your trailer. A trailer tire...
Will the Thule Hull-A-Port Work on Malone Air Flow Cross Bars
Hello, I was just wondering if the Malone Air Flow 2 Bars accept the same adapters as the thule aero bars. Particularly I am looking to pair my Thule Hull-A-Port XTR with my malone air flow 2 bars. It certainly appears that the standard outfittingis...
Is Provider ST235/85R16 Radial Trailer Tire TTWPRG235R16 Made in China
Are the provider ST235.85=16 made in China? | Yes, along with the vast majority of vehicles tires, special trailer tires like # TTWPRG235R16 are often made in China or elsewhere offshore. These tires are produced on the same type of manufacturing...
Vehicle Cover for a 1948 Ford F1 Short Bed with Bumpers
I have a show quality 1948 Ford F1 with a short bed and bumpers that measures 188inch in length. Truck also has twin side mounted rear view mirrors and is always stored inside. Should I order the 188inch max cover or the longer version and...
Will Torklift SuperHitch Magnum for a 2002 Ford F-350 Allow Spare Tire Fit Under Bed?
Will the Super Hitch Magnum still allow for clearance of the spare tire under the bed? My 2002 f350 OEM class 3 trailer hitch has a curved frame to clear the tire.....I see that the tube on the Super Hitch is straight. Thanks! | For your...
Replacing Axles Or Replacing Brakes/Bearings On 2006 NuWa Discover America 5th Wheel Trailer
I have some ne r lube hubs on my 2006 Nuwa 5th wheel, looking at all the options for doing brakes and bearings vs replacing the axles. My question is, do I need to change wheels too since the nev r lubes are set up for 0 offset? | I would be...
Replacement Trailer Breakaway Switch Recommendation with 7 Feet of Wiring
I need to find a break-away switch for a trailer with #12 wires at least 7foot long. I dont want to make a splice and have it in the trailer tongue. | We have the Hopking breakaway switch part # HM20010 that has 7 feet of lead wires that comes...
Filter Your Search
Contact and Help