Summer Starts Here - Save up to 70%
Will etrailer Hub and Drum # AKHD-545-35-K Fit an ALKO Axle
AL-KO # 363219 is the part number for my keystone trailer. The axle rating for my trailer looks like it is 2700# . The electric brakes are 10” and 2-1/4” . The drum is 10” and the bearings are the same as this product. Will it fit? Thank you....
Replacement Legs for Landing Gear on 2008 NUWA Hitchhiker
We have a 2008 NUWA Hitchhiker,, each landing leg has its own electric motor, wired to its own operating switch. My legs are 29 1/2 inch long and punch out from the top is 6 3/4 and from the bottom is 5 1/4 do I need two LG179013 legs? Thanks...
What Does Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR Weigh
What is weight of cover for 35ft 5th wheel? | The Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR that you referenced weighs 44 lbs. |
Recommended Kit to Raise Height of 2016 Keystone Hideout 175LHS
I have a 2016 keystone hideout 175LHS 17ft travel trailer. Unfortunately the trailer hits our driveway when pulling in an out and I fear damaging the trailer. Fortunately, it is only hitting the metal supports which protect the plumbing. But...
Rear View Camera Power for 2018 Keystone Bullet Ultra Lite with Furrion Vision S
When is power running to the backup camera on my 2018 Keystone Bullet Ultra Lite 202BHSWE? Just plugging it in to the prewired connection is not getting power to it? Do I need to have the 7 way plug connected to my tow vehicle? | Power runs...
Is There a Master Key that Unlocks Global Link RV Entry Door Locking Latch Kit # 295-000019
My understanding is that the top locks of these are master keyed for the dealers so they can get into each coach with one key. If I buy a replacement from you, will that rid me of the master key option? | There isn't a master key that unlocks...
Recommended Storage Cover for 2018 Keystone Bullet Ultra Lite Travel Trailer
Whats the difference between the 2018 Keystone Bullet 243BHS, 243BHSWE and 247BHSWE models of the cover? Thanks | The Adco RV Cover for Travel Trailers - All-Climate + Wind (DISCONTINUED) AD77ZR will fit travel trailers between 24 feet 1 inch...
Replacement Nev R Lube Bearing Kit Recommendation for Trailer with Hub/Rotors # K2HR79XLDE
I have a trailer wheel bearing on Kodiak XL-Lube disc brake kit part number K2HR79XLDE running a little hot. When eTrailer installed this kit in August 2017 I assumed that they used Nev-R-Lube 031-071-03 but it now appears that I assumed wrong....
Are There Any Microwave/Exhaust Fans That Will Fit My 2005 NuWa Discover America Fifth Wheel
We need to replace our microwave and fan combo. It is 23 1/2 inches wide by 19 inches tall. The unit we have is an Apollo which I understand is no longer made. | I checked the microwave/exhaust fans that we carry as well as our vendors, Way...
Replacement 3,500 Pound Trailer Axle for Coleman Trailer
Looking for replacement axle: 3500 lbs capacity HF: 86.50 SC: 68.50 Dexter axle #4997676 The other number on the tag on the axle is 428510 Also, should I get an axle with a heavier lbs capacity? Want leaf springs, u-bolts and plate as well...
Can the etrailer 6,000-Watt Portable Inverter Generators Handle Two Air Conditioning Units
I have two a/c units on my travel trailer, one 15k btu and one 13.5k btu. Will these have enough power to run them both? | The etrailer 6,000-Watt Portable Inverter Generators part # 333-0003-2-0007 should be enough to power the 13.5k btu and...
Aluminum Trailer Wheel that Fits 2017 Keystone Bullet 272 BHS
Will the Item #AM22323HWTB fit a 2017 keystone bullet 272 BHS travel trailer? And do you have a ST205/75R14 tire to go with it? Thank you. | Yes, the trailer wheel part # AM22323HWTB that you referenced will fit your 2017 Keystone Bullet 272...
Parts Needed to Add Wet Bolts to Suspension of 2018 Keystone Bullet 269RLS
Good morning I just purchased a 2018 keystone bullet 269rls and want to replace the bolts and hangers other springs with wet bolts What is correct part number. My wheels are 42apart on this camper. Thanks | Sounds like you are just looking...
Would Stallion Arched Ramps Loading Ramp Set Be Good For Loading Snowblower Into Truck Bed
Are these ramps good for loading my two stage 28 inch John Deere snowblower into my Chevy Silverado 2500 | The # 288-07432-2 loading ramp would be an excellent choice for loading a self-propelled snowblower into the bed of your Silverado. The...
Replacing Axles Or Replacing Brakes/Bearings On 2006 NuWa Discover America 5th Wheel Trailer
I have some ne r lube hubs on my 2006 Nuwa 5th wheel, looking at all the options for doing brakes and bearings vs replacing the axles. My question is, do I need to change wheels too since the nev r lubes are set up for 0 offset? | I would be...
Bearings for 7,000 lb Dexter Axle and is Press Needed to Install
what size bearing fits a 7000 lb dexter axle. also do you need a press to install into the hub. | For a 7,000 lb axle with a hub such as Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ you need Inner Bearing # 25580, Inner Race # 25520, Outer...
Powered A-Frame Jack Recommendation for Keystone Bullet 220RBI
looking for electric jack for bullet 220rbi | I looked up your Keystone Bullet 220RBI and it's a camper on an A-frame trailer which we have a great powered jack option for. I recommend the Stromberg Carlson Electric Trailer Jack - Drop Leg...
How To Convert Dometic Manual Awning To Powered Awning On 2004 NuWa Discover
I have a 2004 NUWA discover America hitchhiker 5th wheel trailer. I would like to upgrade my manual domestic awning to a electric. When I put that trailer in your guide the part number suggested says it needs a minimum of 69” unobstructed...
MORryde Shock Absorbing Equalizer For a 2018 Keystone Bullet 277BHSWE
Hi, I am looking for a replacement leaf spring for a 2018 Keystone Bullet 277BHSWE. Also looking to upgrade the equalizer to the MORryde 3000. Any chance you can help with some part numbers? Thank you! | The MORryde 14-3/4" Shock Absorbing Equalizers...
Triple Step SolidStep Recommendation for Doorway that is 25-1/2 inches Wide
my width measurement is 25 and a half inches. will the 26 inch fit | The triple step Lippert Solidstep you want is the part # LC698799 as this step has a width range of 24" - 26" wide for the doorway which is perfect for what you have. |
Trailer Frames Compatible with Ultra-Fab 2-Inch Trailer Hitch Receiver UF35-946403
hello c an i us this hitch for 2014 bullet 247bhs thanks in advance | Ultra-Fab 2" Trailer Hitch Receiver # UF35-946403 is a general-purpose weld-on hitch that will fit I-beam, C-channel or rectangular trailer frames from 47- to 77-inches in...
Correct Replacement for 10 Inch x 1-3/4 Inch Braking Assemblies
Could you use the 10 x 1 1/2 in place of the 10 x 1 3/4 | The 10" x 1-1/2" braking assemblies part # K23-472-473-00 will use the same four bolt brake mounting flange as the 10" x 1-3/4" braking assemblies you have but the hub/drum that goes...
Drain Valve For a Atwood GC6AA-10E Water Heater On a 2015 Keystone Bullet Ultra-Lite 248RKS
Our 2015 Keystone Bullet Ultra-lite 248RKS camper’s hot water heater is an Atwood GC6AA-10E with aluminum threads on the drain. Not sure if it’s a plastic vs aluminum tank. Would this be compatible or do I only need the drain plug without the...
Locating Replacement Scissor Jacks for 2016 Keystone Springdale Trailer
Hello, I am looking to replace 2 of my scissor stabilizer jacks on my 2016 Keystone Springdale Summerland series mini 17 I want to make sure these are the correct size. Is there any chance you can confirm this for me? I want the manual ones...
Filter Your Search
Contact and Help