Replacement Legs for Landing Gear on 2008 NUWA Hitchhiker
We have a 2008 NUWA Hitchhiker,, each landing leg has its own electric motor, wired to its own operating switch. My legs are 29 1/2 inch long and punch out from the top is 6 3/4 and from the bottom is 5 1/4 do I need two LG179013 legs? Thanks...
What Does Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR Weigh
What is weight of cover for 35ft 5th wheel? | The Adco Olefin HD All-Climate + Wind RV Cover for 5th Wheel Toy Hauler # AD69ZR that you referenced weighs 44 lbs. |
Tips for Rolling the Rear Crossmember on the B&W Turnoverball Over the Shock Mount on an F-350
Have the 1108 kit for f350. Rails wont roll over and pass my shock mount so i can slide it back and begin the process... | If you take a look at the attached install video we did of the B&W Turnoverball Underbed Gooseneck Trailer part # BWGNRK1108...
Brightest Interior Trailer Light Recommendation
I would like to change out my existing over head trailer dome lights with led ones so they are brighter. What are the brightest ones you carry? | For maximum brightness out of an interior trailer light I would go with the part # ILL08COB. The...
Best Way to Use Two Different Weight Distribution Systems for Different Weight Trailers
The tongue weight of a TT toy hauler I plan on buying will be in the 10K-13K range max 14K. I am looking at the RP66130. Prefer cams over friction pads. Assuming the RP66130 is a good choice, here is my real question. I also want to tow...
Replacement Nev R Lube Bearing Kit Recommendation for Trailer with Hub/Rotors # K2HR79XLDE
I have a trailer wheel bearing on Kodiak XL-Lube disc brake kit part number K2HR79XLDE running a little hot. When eTrailer installed this kit in August 2017 I assumed that they used Nev-R-Lube 031-071-03 but it now appears that I assumed wrong....
Are There Any Microwave/Exhaust Fans That Will Fit My 2005 NuWa Discover America Fifth Wheel
We need to replace our microwave and fan combo. It is 23 1/2 inches wide by 19 inches tall. The unit we have is an Apollo which I understand is no longer made. | I checked the microwave/exhaust fans that we carry as well as our vendors, Way...
Is the Replacement Hub Clamp Bolt # ERT052 Stainless Steel
Are these stainless | Yes, the Replacement Hub Clamp Bolt # ERT052 is stainless steel. |
What is Needed to Install the Hopkins Smart Hitch Backup Camera and Hitch Aligner System
I am interested in Hopkins Smart Hitch Backup Camera and am wondering if there is any thing more I need to install this in a 2012 f350 super duty truck? | The Hopkins Smart Hitch Backup Camera and Hitch Aligner System part # HM50002 comes with...
Rear View Backup Camera Compatible With Ford Rear View Mirror Plugs
Hi I was wondering if you could suggest a good backup camera I have a 2016 ford f250 xlt crew cab it has the self dimming mirror is there a kit with camera and a mirror I can buy like a plug and play Im sure theres pig tails on the wire harness...
Controlling Sway on A-Frame Trailer with 20-1/2 Inch Straight Tongue
Im looking for a weight distribution hitch for pulling a pontoon behind a truck camper. I would like it to allow backing up and have sway control. The problem I see is that my trailer has a straight tongue for the first 20.5 inches and then...
Why Are Service Body Trailer Hitches Not Rated for Weight Distribution Systems
I recently purchases a draw tite ultra frame service body trailer hitch v-2inch weld on rated for 16,000 and 1600 and I need a weight distribution hitch for my trailer. I noticed after installing that the instructions say not for weight distribution...
Weight Distribution Recommendation for 37 foot Forest River XLR 29KW Toy Hauler
Im buying a 37ft Forrest River XLR 29kw toy hauler with a hitch weight of 1515lbs. Im going to be pulling it with a 2016 F250 6.7 Powerstroke class 5 with 2 1/2 reciever. Not sure what all the weights will be loaded down and Im going to pick...
Parts Needed to Install 7-way and 4-Way Connector in 2001 Ford F-350
I am looking for a tow package wiring harness for my 2001 Ford F-350 V10. I found the Ford Replacement OEM Tow Package Wiring Harness, 7-Way Super Duty with code 118243 which has the correct connection but I was wondering if you have one that...
Will a Reese Weight Distribution Shank Work with a Curt Weight Distribution System
I currently have Curt part #17300 and need more of a drop than the current shank will allow. I was wondering if this shank was compatible with part #C17307 that I have with my current setup. | The Reese weight distribution shank # RP54970 has...
Compatibility of Wheel Masters Airless Inflation Kit # WM80092 with Tire Pressure Monitoring Systems
Is it possible to use a TPMS sensor on this? If not, do you have another solution? | According to my contact at Wheel Masters, the 80092 wouldn't be compatible with TPMS systems, because there's no air in the tube. Using a regular extension...
Can Trailer Tire Size 205/75-15 be Replaced with 225/75-15
Have 205/75 15 on camper can I go to 225/75/15 ?Wonder about width. | When trying to upgrade to different sized tires, you will need to be aware of both width and height clearances between the new tire size and your trailer. A trailer tire...
Is Provider ST235/85R16 Radial Trailer Tire TTWPRG235R16 Made in China
Are the provider ST235.85=16 made in China? | Yes, along with the vast majority of vehicles tires, special trailer tires like # TTWPRG235R16 are often made in China or elsewhere offshore. These tires are produced on the same type of manufacturing...
Will Torklift SuperHitch Magnum for a 2002 Ford F-350 Allow Spare Tire Fit Under Bed?
Will the Super Hitch Magnum still allow for clearance of the spare tire under the bed? My 2002 f350 OEM class 3 trailer hitch has a curved frame to clear the tire.....I see that the tube on the Super Hitch is straight. Thanks! | For your...
Replacing Axles Or Replacing Brakes/Bearings On 2006 NuWa Discover America 5th Wheel Trailer
I have some ne r lube hubs on my 2006 Nuwa 5th wheel, looking at all the options for doing brakes and bearings vs replacing the axles. My question is, do I need to change wheels too since the nev r lubes are set up for 0 offset? | I would be...
Replacement Trailer Breakaway Switch Recommendation with 7 Feet of Wiring
I need to find a break-away switch for a trailer with #12 wires at least 7foot long. I dont want to make a splice and have it in the trailer tongue. | We have the Hopking breakaway switch part # HM20010 that has 7 feet of lead wires that comes...
Will Draw Tite Front Hitch 65022 Fit a 2006 Ford F-350 with Diesel Engine
I have a 2006 f350 crew cab super duty with the 6.0 liter diesel. Will this fit with the diesel engine? Thanks | Yes, the Draw Tite Front Hitch part # 65022 that you referenced has been confirmed as a fit for your 2006 Ford F-350 with a diesel...
Bearings for 7,000 lb Dexter Axle and is Press Needed to Install
what size bearing fits a 7000 lb dexter axle. also do you need a press to install into the hub. | For a 7,000 lb axle with a hub such as Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ you need Inner Bearing # 25580, Inner Race # 25520, Outer...
Troubleshooting No 12V Power on 7-way Wiring on 2000 Ford F-350
What need to do get 12v working. No 12v on my plug ford 2000 f350 just added fifth wheel wiring kit | If the 12V power circuit on your original bumper-mounted 7-way trailer socket on your F-350 worked before you installed the 5th wheel harness...
Filter Your Search
Contact and Help