!Outback Wagon  x   >   Genuine Innovations  x   >   Tru-Flate  x   >  

After the tire inflator reaches its set pressure and shuts off do you have to restart it to inflate the next tire or will it start automatically | With the Tru-Flate Wall-Mounted Tire Inflator # 16-250 you'll want to set the pressure you want...

Can this unit be mounted outside Canada | The Tru-Flate Wall-Mounted Tire Inflator # 16-250 can be mounted to where it is exposed to the elements, and it is compatible with the follow temperatures: - The working temperature is -20°C ~+50°C ...

What size battery does this use? | The Slime digital gauge, part # SLM20202, uses a CR2032 battery. We don't carry them and none are included with the gauge but you can find them pretty much anywhere batteries are sold. They're often used...

Threaded 1/2 inch or 3/8? | Genuine Innovations CO2 Cartridges # SLMG2132 have a threaded fitting that is 3/8 - 24 fine thread. These dimensions are noted on the attached photo. |

What do you have in way of suspension help for a 2020 Pathfinder? Thanks | The only suspension enhancement available for your 2020 Nissan Pathfinder is the Firestone Coil-Rite Air Helper Springs # F4118. These air bags install inside the coil...

I think the product is quite useful for filling up tires and other things in my garage. However can this product clean things with a strong enough stream of air? | The Tru-Flate Wall-Mounted Tire Inflator # 16-250 provides up to 110-psi of air...

Do yall offer the cartridges for this? | Yes, we do offer cartridges that work with the Viair TLC CO2 Cartridge Dispenser # VA57WR. You're going to want the kit # SLMG2132 which comes with 6 cartridges rated for 20 grams. |

Regarding the tru flate wall mounted tire inflator. If I wanted to use this with a wall mounted air compressor hose, will it thread directly or is there a separate connector I can purchase to do it? | The Tru-Flate Wall-Mounted Tire Inflator...

I have a bike with the Presta type valve stem. With this work? | The only way the air pump part # 16-250 can inflate a presta valve is with a presta valve adapter part # SLM23042. |

can this be use as a blower in the shop to blow saw dust and other debris technically i wanna is the stream of air steady or pulsating | TheTru-Flate Wall-Mounted Tire Inflator, # 16-250 is not designed for this purpose, but I think it could...

I am interested in purchasing the PlewandEdelmann Truflate 16-250. Does this have any warranty? If it is damaged or breaks, who would I deal with to correct it? | Yes; the Tru-Flate Wall-Mounted Tire Inflator - 110 psi - 120 Volts # 16-250...

Model 110 psi/ 120 volts was installed in my apartment building. I tried using it but the air whooshed out of my bicycle tire instead of going In. Do you have any videos on how to operate this model? Thanks | Yes, I attached a link to this...

how accurate is the truflate 16-250 air inflator? i.e. if set at 32 psi, will it shut off at 32psi | If you were to set the Tru-Flate Wall-Mounted Tire Inflator # 16-250 to 32 psi it would inflate the tires to exactly 32 psi. It is very accurate. |

Could you please send me the outside dimensions of the inflator. | I went to our warehouse so I could measure the housing of the Tru-Flate Top Off Mini Tire Inflator # 16-230. The housing of this unit measures 4-3/4 x 3-3/4 x 2-1/4-inches....

The outlet in my highlander is rated at 400W. This is I believe a 2amp draw at 120v so this should work fine as a semi portable powered compressor/inflator to use out of the back of my car. Right? Most of the 12v compressors need 15amps at...

Will a closed or open flow chuck work with the Tru-Flate 16-250? | The Tru-Flate Wall-Mounted Tire Inflator part # 16-250 must be used with a flow-through air chuck as the shutoff valve is inside the compressor and not in the air chuck. |