!Cherokee Alpha Wolf Travel Trailer  x   >   !Impala  x   >   Pontiac  x   >  

Is this hitch able to pull a uhaul cargo trailer. | Per the 2008 Pontiac G6 owner manual the maximum weight of a trailer used should not exceed 1,000 pounds. So as long as the cargo trailer you use is less than 1,000 pounds when fully loaded,...

Hi, The vehicle has a 4 pin connector Pontiac Montana 2009 van and the new camp trailer has a 7 pin connector. The new trailer has the electric brake option I will not use at this time. No brake controller on the van. I also have a smaller...

I have an 09 G8 Gt that I would like to be able to disable the displacement on demand feature on my car, eventually I will remove the setup from car and install new cam and lifter and other parts needed but for now the budget is not available.Thanks...

Will INXP fit the 2009 Pontiac Vibe base hatchback? I have fixed points with covers. Thanks! | I have a solution for you. Unfortunately, the Inno Feet for Square Crossbars # INXP will not fit your naked roof with fixed mounting points on your...

Does a bolt leader come with Draw Tite 36309 ? | The Draw-Tite Trailer Hitch Receiver part # 36309 does not come with a bolt leader. This will need to be purchased separately using the 1/2" Bolt Leader part # 80101-1. |

Hi, Does this hitch clear a full-size spare tire for a 2006 Pontiac Montana SV6? | Yes, the full size spare will need to be lowered to provide access to the hitch attachment points, but will fit back into its original location after installation...

Is there much difference from drawtie class 1 and class 2 hitches.I see # rate are different,but are they close. Ill be using to tow 4x8 utility trailer,half dozen times a year. Vibe has the 2.4 engine. Will need hitch,also do they come with...

I have an 02 Pontiac Grand Prix GTP. On level ground, I have only 9.5inch of clearance from the bottom of the fascia to the ground to begin with. I like the CURT because it has the tongue weight that I need but ground clearance is an issue...

Can I trail a wave runner with this product c12225 | That depends on the weight of your wave runner and trailer. The Curt Hitch part # C12225 that your referenced is a Class II hitch with 3,500 lbs towing and 350 tongue weight capacity. If your...

Can I flat tow a 1998 pontiac trans sport van automatic transmission | According to my research, your 1998 Pontiac Trans Sport Van can be flat-towed with all four wheels down but you will need to use a lube pump on the transmission to do so...

purchased a 2009 Trail Sport TSE191 UVW of 3100#, 324#TW. I have an option to buy 1200#/12000# Dual Cam system. Will this work for my application?? From reading on your site I get the feeling it will work but offer a stiffer ride, would that...

i have a 2007 pontiac g-6 convertable 4 cylinder. this item is for the g-6 however it excludes convertibles, which I have. is there a mounting bracket similar to this for my convertible? Do i need a mounting bracket on the car if i choose to...

What is the difference in the classes of hitch receivers? is there a place for my wiring connector already under the car so all I have to do is plug in my pigtail? | Trailer hitches are divided into Classes by weight carrying and tongue weight...

I have to fishwire a bold down the bumper. How do I attach the fishwire to the bolt before I pull it through? What kind of fishwire do I use? | You would need wire that is flexible enough to wrap around the bolt threads without coming loose....

I purchased a Tow Ready 118458 T connector wiring assy for my Vibe. It has the 4 flat connector for the car. My trailer has a 6 round connector. The breakdown for the wiring on the trailer is looking head on at trailer plug starting at top...

I bought a used one from eBay, but am afraid my cross bars are not far enough apart. I am pretty sure they are less than the 36inch another Youtube video recommended. Will this fit a narrower spread? thanks | Having the cargo bag, # TH868, between...

Helo, If I buy this drawbar #3593 or c45025, with hitch ball do I need to buy I need a 2inch ball, but I dontt know the diameter of the schank. kind regards, | For a 2 inch ball to use with the draw bar part # 3593 you would want the part...

I have a 2003 Vibe, need to put in trailer light harness, I removed a Tow Ready 17499-203 converter from a 1999 Pontiac Montana, can I make this work on the Vibe? | For your 2009 Pontiac Vibe you would want the Tekonsha harness part # 118460...

I would like to know how can i found a kit of all the bolts i need to install my hitch on my montana 2006...I bought the hitch and do not have any bolts with it... | We have a part kit that you can order, part # RHK. You would enter the hitch...

All I need to connect to a 2006 Pontiac Vibe. Motor Home has one light for brake/turn, Vibe has separate turn/brake lights w/daytime running lights | You could use a Taillight converter like part # 118158 in conjunction with a wiring kit like...

NEED TO CONVERT FLAT BAR TYPE TO 2 SQUARE TYPE. 1996 FIREBIRD | There are no available adapters that would convert your flat bar receiver to a 2 inch receiver, nor is there a 2 inch receiver available for the 1996 Firebird. The Class I receiver...

Does the Khule car top carrier fit a 2007 Pontiac Vibe? | The SportRack Vista XL Cargo Box - Roof Mount, part # SR7018, will fit on Thule square load bars, Yakima round crossbars and most factory bars, but you will want to measure the diameter...

what parts do i need to tow behind my motor home it has the hitch and wireing i need the car set up , and what to unplug to tow it being and automatic. Thank You | If you have a 1999 Pontiac Grand Am SE you will need the Roadmaster XL Base...

Hello I have right now on my 2002 Pontiac Montana a flat 4 way plug.... I have recently aquired a trailer with a 7 way plug with trailer brakes.... I do not have a brake controller as of yet but soon will be..I would like to know what I need...