F-350  x   >   2017  x   >   !Transit Connect  x   >   !King Aire Motorhome  x   >   Sprinter 2500  x   >  

Do you have a matching carpet for the front of the sprinter van? I would like to do the complete Sprinter van in grey carpet. Sprinter is 144inch version Thanks, | The VanRug gray of the # VRMS06M is a pretty unique blend of gray and black...

will your p/n # AKEBRK-35 fit a Dexter 3500# axle? thanks | Yes, as long as you have a 3,500 pound axle with 10 x 2-1/4 inch hubs the etrailer.com Electric Trailer Brake Kit # AKEBRK-35 that you referenced will fit and work perfectly. It is...

2017 Mercedes-Benz Sprinter 2500 I need to add a trailer brake controller. I have the trailer package. Trailer lighting wiring is in place. Just curious if the vehicle is ready for a plug and play controller. Thanks. | There is no plug-and-play...

I have a 2017 Mercedes Sprinter 2500 that has a factory step bumper, which hitch do I need? | For your 2017 Mercedes Benz Spinter 2500 with the factory step bumper we have the Curt hitch part # 13358 which is a confirmed fit for the long and...

I have a 2017 Winnebago View 24J on a Mercedes Sprinter Chassis. I am looking to improve the ride and handling. I have heard people referencing Sumo springs and sway bars. What would your recommend? Also i am looking for options in jack stabilizers...

I had it on the auto temp setting. Then drove off and it started beeping. Now nothing works, but the green light stays on, but the van will not respond at all. Thanks | According to the manufacturer's instructions three beeps and a green light...

I am just looking for a couple of inches. Right now the driveline seems to be grooving into a pipe below. Would putting both the front and rear springs help at all? | The SumoSprings Solo Custom Helper Springs part # SSF-106-47 which are a fit...

Looking for a wheel bearing kit for an EZ loader boat trailer VIN 1ZExxxxxxxxxxxxxxx | For your VIN that starts with 1ZE the correct bearing kit is the part # BK2-100. |

Hi, 2017 Mercedes Sprinter Van 2500 high roof 144wb. OEM roof track. I would like to mount the Lock n Load directly to the skyline towers, no crossbars because i want to save as much of the height as possible. Yakima web site says 84x62 is...

Will using this disrupt the ground if the jack grounds through the hardware? | Good question. The Lippert Jack-It, part # LC429756, certainly could cause a ground issue if the A-frame jack grounds through the mounting hardware. The rack is...

Will these fit a sprinter 144 high roof? | Since the Rhino-Rack tracks # RRRTS546 are sort of a universal product you would just have to make sure the length is appropriate for the available space on the roof of your 2017 Mercedes Sprinter 2500...

Hello, I am looking at this hitch and when I plugged in the year of my sprinter it said it was un-confirmed whether or not it was compatible. Could you provide anymore info for me? I have a 2017 Mercedes Benz Sprinter 2500 170inch wheelbase...

Hey Gang...Im getting some mixed signals on whether the # RAS3620 will work on my vehicle. It says it will work but im not so sure. So please confirm this will work on a passenger, 2500 2017 Sprinter. | Yes the RoadActive Suspension kit part...

My disconnect circuit doesnt register when starting system during boot up. I have checked continuity with a DVM and wiring check out as correct when manually pulling the nylon plug out. I even pulled front display panel and check continuity...

Will the Kuat pivot work with my Curt 13358 hitch receiver and step bumper on my Sprinter? | You will need to take a quick measurement to make sure that the Kuat Pivot, part # PVP20B will clear your step bumper. Simply measure from the center...

it looks like the TK22115 provided connector is a 7-way, do you offer an upgrade option a connector with 7 and 4 pole like the Hopkins 40974? The vehicle application is a 2015 Sprinter 2500. | The Tekonsha OEM Replacement Vehicle Wiring Harness...

How do we fix? LED light bar wont stop flickering. Turned off. Fuses removed. | The best way to stop hyper flashing which is the flickering you are referring to on your LED light bar is to add load resistors like the Diamond LED Light Bulb Load-Resistors...

Hi, the video mentions what the Yakima Backswing will not work with, but how about a 2017 Sprinter? Thank you! | Sure, the Yakima BikeSwing # Y02483 can be used on a 2017 Mercedes Sprinter van. It is not a vehicle-specific part, so as long...

I just replaced my old blue ox tow bar that had roadmaster adapters. I also use a tow defender with it. The new etrailer SD tow bar has a 3/8 bolt rather than the 1/2 bolt of the roadmaster- to connect the tow defender brackets to the ends of...

Ive a 2017 Sprinter without the factory tow option. Has your product been successfully installed on a sprinter? By successful no CELs? Do you have any literature I could see as to installation? | We've had the chance to install the brake...

I have a 2017 Mercedes Sprinter / 2500 Cargo Van / Factory hitch assembly with pre-wired 7 pin socket. I looked for a socket for a plug and play Prodigy P 3 controller cable. Can’t find it anywhere. Saw in your QandA that the 2017 factory...

I have a 2017 Mercedes 170 4x4 with factory step, what trailer hitch would I be looking at? | For your 2017 Mercedes-Benz Sprinter 2500 with a 170" wheelbase and factory step bumper I recommend Curt hitch # 13358. This hitch has a 2" receiver...

Im looking to install this in another vehicle than original designed. Do you have dimensions for this seat? | I spoke with my contact at Bestop who gave me the following dimensions for the Bestop TrailMax II Fold & Tumble # B3943915: Base: Length...

I look under vehicle doesn’t have rear sway bar link .on the rear differential have Therad to install bolts do they com with no sway bar from factory and is yours will fit . Also do I need to drill to the chassis for the end to fit thanks...