Result: Brake Controller with Wiring

with a brake control and which wiring harness to fit from my rear brake light to your recommended 7-way blade | I purchased a 2002 palomino stampede st21sl i need to know how...

detect a signal on the red wire then you know the controller is receiving its brake signal from | Will the controller light up without the traIler wiring plugged in? In other words is it possible...

I have no current trailer wiring whatsoever but want to tow a trailer braked trailer. I have a 4 | I have no current trailer wiring whatsoever but want to tow a trailer braked trailer. I have a 4 wire adapter...

installation on your vehicle. If not, then you will need to wire the controller up to the wiring of your brake | I have a 2000 Land Rover Discovery. I purchased your Prodigy...

that is there or cutting it and wiring the routed wire to end that leads to the brake controller. On the back of the 7 | I was hoping you could help me. I am looking to fit...

, you'll need a brake controller and our Brake Controller Install Kit, part # ETBC7. For a brake controller | I need a trailer connection installed...

Will the Tekonsha Prodigy RF Electronic Brake Control work with my Range Rover or do I need | Will the Tekonsha Prodigy RF Electronic Brake Control work with my Range Rover or do I need to purchase additional...

to use the Wiring Kit # 5506 to run wiring to your brake controller and the positive side of the terminal | I would like to purchase a Tekonsha Prodigy P3 Trailer Brake Controller...

breaker 9506P for 2- to 4-brake applications? Which bracket will I need to mount my brake controller | Im getting prepared to tow my new 2013 Lance 1685 Travel Trailer 21foot with my 2002...

I have just installed a P3 brake control on my 2004 Land Rover Discovery II. I have yet to buy | I have just installed a P3 brake control on my 2004 Land Rover Discovery II. I have yet to buy a trailer but...

article on wiring a brake controller. We do offer hardwire options to provide a 4-way | hi, im planning to purchase an Atlantic British wiring exclusive harness for my vehicle that converts...

The best way to install a brake controller like the Prodigy P2 part # 90885 on a vehicle like your | I have a 2001 MBZ 320. I purchased your Prodigy controller, and your ETBC7 kit. The vehicle has your 4 wire...

in my cart the base plate for the LR and the Airforce one for supplemental brake system. I can’t tell | I have a 1992 Beaver Contessa, 2001 Land Rover Discovery and a Roadmaster Falcon II bar. I have in my cart the base plate...

. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies | What Blue Ox or Roadmaster tow equipment do I need to tow a 2003, 4700 lb LR Discovery II. Do I...

by entering the wrong info to set the brake controller I set it for 7.0 instead of 6.0 | Is it possible to do a factory reset on the settings or is that even necessary. I made a mistake by entering the wrong...

. For a brake controller I recommend the P2 # 90885 because it is easy to set up and use and it is reliable | I own a 01 discovery 2 LR. I have a british atlantic 4 pin harness for my little trailer, 5x10....

. I understand Ill need push plates, tow bar and aux brake system. Which kit is most appropriate | I have a three-part question: 1. I hope to tow my 2003 LandRover Discovery behind my motorhome. I understand Ill need push...

How do I look up this FAQ article you wrote for the 2004 land rover discovery brake controller | How do I look up this FAQ article you wrote for the 2004 land rover discovery brake controller install | No need...

coil springs to help level your vehicle, improve braking and handling and reduce tire wear. You | Please let me know if i be able to fit this product in to my land rover discovery 2000 changing the originals with this product...

I just installed the ETB7C and Tekonsha P3 on our Land Rover. I do not have a trailer yetgetting ready to buy. Do you have a product like this one for testing? I want to make sure I have done the install correctly. I need a 7-way tester. I...

setup, you will need a tow bar, safety cables, wiring or lighting, and a supplemental brake system | I need a baseplate/towbar to work with the dealer installed brush guard. | I contacted our representative...

this indicate somethings wrong with the adapter? Is there something different about the way it should be wired? | i have a 2001 land rover discovery 2. I recently bought a 7 pin to 4 flat adapter. When i plugged it in and hooked...

. There should be one pin for right turn/brake lights, one pin for left turn and brake lights, one pin | Do you offer an adapter I can use on my 2003 Land Rover Discovery? Factory is a round plug with 4 way...