Result: Brake Controller

side brake wire. and the brown wire to the Brake controller, brake wire ? | I have a 1986 Ford f350. I spliced into the cold side of the brake switch, keeping the original...

On a typical brake controller installation, you will connect the brake light switch red wire coming | First I understand all the wiring and where everything goes. A supplemental sheet was included...

to a proportional controller? My reason for asking is with the proportional, will the brakes on the trailer | My truck is a manual transmission, am I better to go with a time-delayed controller as opposed to...

I want to add a brake controller to my truck, I have a 4 pole connector. What will I need | I want to add a brake controller to my truck, I have a 4 pole connector. What will I need, will a Curt 51110 brake...

I need a 7-pin connector and brake controller for a 1986 Ford Bronco. I currently have a 4 pin | I need a 7-pin connector and brake controller for a 1986 Ford Bronco. I currently have a 4 pin connector installed....

have a prodigy P2 brake controller. I want to add that and a 7 wire trailer plug on truck. What do I | Hi, I have a 1986 Chevy scottsdale. It just has 4 wire trailer plug on the back of the truck. I have...

will need to use the Universal Brake Controller Wiring Kit # ETBC7 to utilize that 4-way connection and add | I have an 86 F350 crew cab, 8foot bed, Im looking for a complete wiring setup for a 7 blade system...

do you have instruction manual for older model 2016 tekonsha brake controller? also wiring diagram | do you have instruction manual for older model 2016 tekonsha brake controller? also wiring diagram for truck...

Ok I know this is very non-typical but here goes. I own this brake controller, it stays attached | Ok I know this is very non-typical but here goes. I own this brake controller, it stays attached to my motor...

I have a 1986 GMC 2500 that was my dads. I have this brake controller in my 2008 GMC dually | I have a 1986 GMC 2500 that was my dads. I have this brake controller in my 2008 GMC dually and have been really...

If the lights are flashing on your Tekonsha Sentinel brake controller it's most likely going | I have a 1996 Tekonsha Sentinel break controler mounted in my 1986 250 Ford pickup. I have used it and it worked...

step on the brakes, I get 13 v on the stoplight, 3.5v output and 0.0 output amps. When I pull | Hello- Ive got a tekshona p3 that isnt detecting my trailer. Ive checked the wiring and it seems to be proper, all my lights...

work for that? Also, any recommendations for brake controller and seven pin bumper plug? | I just bought a 1986 GMC Vandura 3500 short bus and I was wondering if the Curt c13016 hitch would work for that? Also,...

attached a help article on brake controller troubleshooting for you to check out as well. | Is the green light on controller suppose to stay On all the time | The green light on the display of the Tekonsha...

to activate the Jeep's brake pedal with matching intensity. The remote controller with LED display lets | What supplemental braking system do you recommend in a 1986 cj7 towed behind a truck camper? | For...

tester to find the cold side of the stop light circuit (it only gets hot when you depress the brake pedal | Do you have a wiring diagram showing how to connect my Tekonsha Prodigy P3 to my 1986 Chevy Suburban? Thank you for...

7L and Curt Echo brake controller # C51180. | Will this fit a 1986 D350 dually that was originally a chassis and cab, not a pickup bed? I dont see an exclusion in the description. | For your Dodge truck the...

to an in-cab brake controller if the trailer has brakes and you want to use them otherwise you can just tape | Hi, Im looking at the CURT 57672 Dual-Output 4 Flat Vehicle-Side to 7-Way RV Blade...

will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your | What will I need to set up for flat Towing the Bronco 2. Base Plates and Towbar? | We have all of the parts you'd need...

lift it with the camper installed. The truck has an old brake controller that is tapped | I have an 86 Chevy C30 dual cab dually. I have installed a new GM HT502 crate engine with a BandM Traveller TH400...

light function that will only come on when the vehicle is shifted into reverse, or a brake controller | I would like to use the OEM wiring harness that is at the back of the vehicle. It is a flat 5 plug, but...