Result: Brake Controller

Ive hooked up the spectrum controller to my 2010 f150 and I get 12v when applying the brake | Ive hooked up the spectrum controller to my 2010 f150 and I get 12v when applying the brake into the controller....

and when you apply brakes manually or by foot controller goes blank when you let off it flashes .c. again | second attempt to solve this controller is still flashing .c. even when you disconnect trailer and...

I have a 2010 Ford F150 Crew Cab with factory tow package. I installed a P2 brake controller | I have a 2010 Ford F150 Crew Cab with factory tow package. I installed a P2 brake controller and installed the...

I had a Tekonsha Voyager brake controller installed on my 2003 Ford F-250 when it was brand new | I had a Tekonsha Voyager brake controller installed on my 2003 Ford F-250 when it was brand new. The controller...

Either the brake controller has an internal problem, or the wiring of the controller is at fault | When I try and adjust the blue power wheel it jumps from 0.0 to 14 without any settings in...

a brake controller. What is required? I assume the brake controller harness behind the dash should exist | I want to convert a ford f150 2010 from the factory 4 way harness...

up to 10 on controller,spin tires hit brake on truck wheels keep turning, but hand brake works. when | f-450 trailer brakes not working when hitting brake pedal, jacked trailer off ground,...

I have a 2004 Ford 150 and when I use the foot pedal brake the indicator light on the controller | I have a 2004 Ford 150 and when I use the foot pedal brake the indicator light on the controller flashes continually...

are sure the adjustments are not set all the way to 0 or the mounting angle of your brake controller | I have brakes when the manual switch is activated and when the breakaway is activated, but not when the...

Hi, I have a really old Kelsey trailer brake controller Not even sure what model. It’s on a 99 f | Hi, I have a really old Kelsey trailer brake controller Not even sure what model. It’s on a 99 f250 superduty....

If the Hopkins Agility Brake Controller, part # HM47294, is installed and wired properly | my display keeps telling me that the trailer is disconnected. | If the Hopkins Agility Brake Controller, part # HM47294,...

to and coming from the brake controller. There are 4 wires that will need to be checked. White - Ground Red | light of trailer work perfectly but controller not registering checked fuses all good dont know...

Did you check to make sure the red wire of your controller has 12 volts when the brakes are applied | They work when I pull the test bar but when I push the pedal I have nothing coming from the box | Did you...

Hi! I recently purchased a Reese Towpower brake controller8508211 and I’m trying to hardwire | Hi! I recently purchased a Reese Towpower brake controller8508211 and I’m trying to hardwire it to my 2007 Ford...

have the port for the brake controller, the blue wire for the electric brakes terminates somewhere | I have an 07 ford exp with tow package and a 4 prong connector on the rear of the veh. I...

The Trailer Brake Controller is not recognizing a trailer on my 2013 Expedition EL. When i plug | The Trailer Brake Controller is not recognizing a trailer on my 2013 Expedition EL. When i plug in my trailer,...

testing. You can test for proper voltage output at the trailer connector when the brake controller | 2005 f150 Trailer pulls fine most of time when I brake..it shows 3.5 for instance. Then the rest of time...

I get power out when I activate the controller manually, but if i use the foot brake | I get power out when I activate the controller manually, but if i use the foot brake there is no output | Since your manual...

For the 2007 Ford F-150, you should have a port on the vehicle for a brake controller wiring | I would like to know the corect wiring for the voyager controler for a 2007 Ford F-150 FX-4 I used the controler...

Since you had the Curt Venturer Trailer Brake Controller part # C74VV installed and working on your | I have a Curt Venturer controller that worked fine in a 2015 f250 and i switched it to a 2000 f350 using...

On a typical brake controller installation, you will connect the brake light switch red wire coming | First I understand all the wiring and where everything goes. A supplemental sheet was included...

trick your brake controller into thinking that there is a trailer connected to it by placing a load | I tested the voltage on the truck sitting still Im getting 2.3 volts at the plug. What should it be with...

the truck to the controller tests as zero volts when the brakes are off and 12 volts when the brake | Installing Draw-Tite 5504 on 2010 F-150 that has the 4 prong wire hookup already wired...

need to replace your brake controller the Hayes-Lemmerz Energize III+ # HA81742B is the same | with trailer plugged in it tells me I have contact when I step on brakes the trailer brakes do not apply tried...