Result: Brake Controller

Hi, Can you please help me? I need a wiring diagram for a Tekonsha Voyager brake controller | Hi, Can you please help me? I need a wiring diagram for a Tekonsha Voyager brake controller for a 1998 Chevy Silverado....

The item that you selected, Tekonsha P3 Trailer Brake Controller, part # 90195, will work | I have a 2007 GMC 3500HD and it seems that the factory installed controller will not operate my hydrastar. I have...

I was told the P3 brake controller and 3016 pigtail wiring harness will work on my 2015 Tahoe | I was told the P3 brake controller and 3016 pigtail wiring harness will work on my 2015 Tahoe, for use with a Titan...

you recommend an axle for this pop up? We will also need a brake controller for the Kia | I have a 2003 Skamper Sport pop up model 1002 that we want to tow with our 2008 Kia Sedona. I believe well need a new...

connector. My question is, what do I have to do to install a brake controller? Im planning to tow a Forest | I have a 2015 Jeep Cherokee Limited 6 cylinder which I purchased without the tow package. I took...

I am looking for a brake controller and wiring harness for a 2012 Monaco Knight Motorhome | I am looking for a brake controller and wiring harness for a 2012 Monaco Knight Motorhome. The model is a 40 DFT. Can...

pole plug. What is needed to control the brakes on the trailer? Easier to convert the trailer | have a 4 pole on a boat trailer. The boat trailer has brakes. My truck has both, a 4 pole and a 7 pole plug....

package on it. Is there a harness available to connect the controller to the brake switch and the wire | I have a prodigy 2 controller To install on a 2008 Jeep Grand Cherokee 4.7 liter with a factory two...

brake controller from a previous vehicle. Tekonsha P35A1070217. Do you have a wiring harness | I have a 2024 Jeep Grand Cherokee L with the factory installed tow package. I also have a trailer brake controller...

. I have a brake controller on my Toyota and I want to be able to move it to my jeep using | I was looking at your part 20265 and wondering if its possible to buy the opposite connector for it. I have a brake...

Hi I have just installed the tekonsha primus brake controller. When I installed it I installed | Hi I have just installed the tekonsha primus brake controller. When I installed it I installed a fuse on the positive...

and a brake controller. Installing the brake controller would be a pretty simple process. I'd recommend you | Re: Trailer Brakes...I have a light fiberglass dual-axle enclosed...

connector. Once the 4-Way is installed, see instructions link, you will need the Brake Controller | Do you have an all inclusive kit for wiring a triple axle trailer with electric brakes. I am pretty handy...

I have a 2008 Monaco Knight motor home and I need to install an electric brake controller for my | I have a 2008 Monaco Knight motor home and I need to install an electric brake controller for my trailers. ...

provided, you can see our technicians installing a different brake controller on a 2013 FJ Cruiser. Even | Greetings- I am looking at this controller. My FJ doesnt have factory towing and has a 4 pin. I installed...

Harness 4-Pole Flat Trailer Connector ETBC7 Universal Installation Kit for Trailer Brake Controller - 7 | Installed the following on the Ascent and using a Tekonsha P2 controller: 76253 Draw-Tite Max-Frame...

I have a 14 ft flat trailer that dose not have brakes, will a brake controller on my motorhome work | I have a 14 ft flat trailer that dose not have brakes, will a brake controller on my motorhome...

and already 4 flat connector with Tekonsha brake control would the wiring diagram be the as the 2013 that u | I just got a 2015 unlimited wrangler Sahara and have tow package I would like to hook up 7 blade...

I found the correct brake controller plug up under the dash, the blue factory wire goes up | I found the correct brake controller plug up under the dash, the blue factory wire goes up into the wire bunch and...

controller like the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 on your 2018 Chevrolet Equinox | you dont want to do it the way you have in your current instructions. going in...

, to protect the wires from the sharp edges created when drilling. If you are installing a brake controller | where is the easiest place to run wires or cables from under hood through firewall into cab on 2002...

and your set. if you are wiring in a brake controller you will need to extend the wires from the plug | I thought this product comes with installation instructions but it either didnt have any or I might...

the factory 7 pin wire harness. I have an extra blue wire under the hood rolled up for the brake controller | I have a 2010 Chrysler Town and Country. Last year I put a towing package on, and added the factory...

To duplicate the Universal Installation Kit for Trailer Brake Controller, # ETBC7, minus the 7-way | I need install kit etbc7 but without the 7 way plug. Do you offer a kit like this? | To duplicate the Universal...