Result: Brake Controller with Wiring

, and the blue wires the brake control wire reads varying voltage as the brake is pressed but no power voltage | I purchased a Prodigy P2 controller, installing...

Sounds like the problem is on the wiring of the brake controller. The red wire will need | It is not working during the stopping motion, it does work when I press the manual...

controller for +12 Volts power and the Light Green wire to the Red Stoplight wire on the brake controller | I purchased a Tekonsha #9030 Voyager Brake Activator...

. If not you can still wire a brake controller to your 7-way but you'll have to run some wires | Hitch with 7 pin plug on back. Spring loaded door on plug says chrysler but...

it is to setup. Next, for a wiring kit to install the brake controller to the 7-way you would want the Wiring | I have 2002 GMC Sierra SLE 1500 4WD Z71. I had a shop wire...

to Brake Control I want to wire to a Prodigy P2 Controller Black Battery Red Stoplight White Ground | I have a 2002 F-250 Super Duty wiring harness part #14A348 it has 5 wires...

To install a brake controller on your 2002 Saab 9-3, you will need to wire it. For the Saab 9-3 | I have a 2002 saab 93 and am interested in using this brake controller to pull a 1000lb travel...

To connect the Universal Brake Control Wiring Adapter, part # 3025-S, you would plug one end | I need to know what color goes to what on the adapter I cant find my papers on what wire goes to...

I think the wires you describe are actually the OEM pigtail for installing a brake controller | The previous owner of the 02 Chevy must have cut the plug off and he just wired the old brake...

then there is an issue with the wire from your brake controller to your 7-Way. Did you really mean to say inch | You answered the Nissan Owners as follows: If you are getting 12V of constant...

that the factory wiring harness wire colors will match up to the brake controller wires color for color | on a 2002 f250. when connecting to facorty harness...

factory brake controller wiring adapter. The red wire from the Ford adapter should go to the black | I purchased a different vehicle and would like to transfer my brake controller...

and the plug-in wiring adapter for that brake controller. I would recommend the Tekonsha Prodigy P2 Brake | on a 2002 f250sd where will the factory plug be located for the...

and how easy it is to setup. Next, for a wiring kit to install the brake controller and the 7-way | Need to add break controller to 2002 4Runner. No Factory tow package... But already have...

Need to hard wire a controller in a Topkick with Hydraulic brakes any insight would be help full | Need to hard wire a controller in a Topkick with Hydraulic brakes any insight would be help...

one, part # 118344, and then hard wire the brake controller using the brake controller installation | where is harness to plug into under the dash? on a 2002...

. This will provide the power source and ground for the wiring for the brake controller. You will need to test | is it possible to get this kit without the 7 way at the back, just need the...

breaker, included, in-line with the wire. See the brake controller manual about which breaker to use | I have a 2002 4 runner without the tow package. I do have a 4 pin hook up that I added...

on the back of the brake controller. The remaining 3 wires on the brake controller will also have | Hello, I have a 2002 Toyota Tundra Limited. It currently...

into the 7-way which wires to the brake controller. The brake controller I recommend checking out | Looking for complete kit wiring and controller for 2002...

, and explains where to attach the brake controller output wire and 12 volt power lead for attachment to a 7-Way | are the cables pre installed on a sierria gmc on a 02 plate | If your 2002...

. On the brake controller, the white wire is ground and connects to the vehicle negative battery terminal. Black | I am trying to find a brake controller for my 2002 oldsmobile bravada with...

I have a Tekonsha Voyager brake controller with 4 bare wires. I am trying to install on a 2002 GMC | I have a Tekonsha Voyager brake controller with 4 bare wires. I am trying to install on...

culumn. Just no signal to the controller from the brake switch, when brake is pushed. NO wiring mods | Im the original owner of a 2002 chevy 2500hd 8.1l with an alison. Ive...